Novel Design for Optical Scanner with Piezoelectric Film Deposited by Metal Organic Chemical Vapor Deposition
スポンサーリンク
概要
- 論文の詳細を見る
A two-dimensional (2D) optical micro mirror scanner with piezoelectric film deposited by metal organic chemical vapor deposition (MOCVD) was designed, fabricated, and evaluated. The overall area of the device is $2.5\times 2.5$ mm2 and the mirror diameter is 1 mm. A small footprint device compared with the mirror size was realized. The piezoelectric film was deposited using a semi-homemade MOCVD apparatus. The device was fabricated by a micro fabrication technique with simple three mask processes. The optical scanning angles of torsional and bending rotations are, respectively, 17 and 16° at 20 Vp–p with a 1.6-μm-thick lead zirconate titanate (PZT) film and a 20-μm-thick Si structure in atmospheric ambient. The resonant frequencies of torsional rotation mode and bending rotation mode are, respectively, 15 and 10 kHz. The laser beam scanning of an unclosed Lissajous figure can scan all the pixel points on a 2D image frame within a certain time interval. The small 2D scanner is expected to be suitable for the mass production of portable optical devices.
- 2010-04-25
著者
-
Kawai Yusuke
Graduate School Of Engineering Tohoku University
-
Esashi Masayoshi
The World Premier International Res. Center Initiative For Atom Molecule Materials Tohoku Univ.
-
Matsuo Hirokazu
Research and Development Center, The Nippon Signal Co., Ltd., Kuki, Saitama 346-8524, Japan
-
Hirokazu Matsuo
Research Center, The Nippon Signal Co., Ltd., Kuki, Saitama 346-8524, Japan
-
Yusuke Kawai
Graduate School of Engineering, Tohoku University, Sendai 980-8579, Japan
関連論文
- A high-resolution endoscope of small diameter using electromagnetically vibration of single fiber (特集 医療用MEMSデバイス)
- Electrostatically Switchable Microprobe for Mass-Analysis Scanning Force Microscopy
- Magnetic Torque Driving 2D Micro Scanner with a Non-Resonant Large Scan Angle
- Sputter Deposited Zinc Oxide Photoconductive Antenna on Silicon Substrate for Sub-Terahertz Time-Domain Spectroscopy
- Micromachined Optical Near-Field Bow-Tie Antenna Probe with Integrated Electrostatic Actuator
- Debris-Free Laser-Assisted Low-Stress Dicing for Multi-Layered MEMS : Separation Method of Glass Layer
- Piezoelectric Resonator for Intravascular Ultrasonic Elastography
- Micro Wishbone Interferometer for Miniature FTIR Spectrometer
- Noise-Enhanced Sensing of Light and Magnetic Force Based on a Nonlinear Silicon Microresonator
- 504 Crystallographic orientations and thermal treatments influences on nanomechanics of ultra-thin single crystal silicon (SCS) resonators for ultimate sensing
- Debris-free Low-stress High-speed Laser-assisted Dicing for Multi-layered MEMS
- Debris-Free High-Speed Laser-Assisted Low-Stress Dicing for Multi-Layered MEMS
- Microassembly of PZT Actuators into Silicon Microstructures
- Synchronized mechanical elements for resonance sensing application
- Fabrication of Anti-Corrosive Capacitive Vacuum Sensors with a Silicon Carbide/Polysilicon Bi-Layer Diaphragm and Electrical Through-Hole Connections on the Opposite Side
- Investigation for (100)-/(001)-Oriented Pb(Zr,Ti)O3 Films Using Platinum Nanofacets and PbTiO3 Seeding Layer
- Novel Design for Optical Scanner with Piezoelectric Film Deposited by Metal Organic Chemical Vapor Deposition
- Design Issues for Piezoresistive Nanocantilever Sensors with Non-uniform Nanoscale Doping Profiles
- Modeling and Experimental Analysis on the Nonlinearity of Single Crystal Silicon Cantilevered Microstructures
- Fabrication of Freestanding Pb(Zr,Ti)O Film Microstructures Using Ge Sacrificial Layer
- Fabrication of Einzel Lens Array with One-Mask Reactive Ion Etching Process for Electron Micro-Optics
- Epitaxy of Graphene on 3C-SiC(111) Thin Films on Microfabricated Si(111) Substrates
- Fabrication of a Si-PZT Hybrid XY-Microstage with CNT-Carbon Hinges