Fabrication of Thick Bi_<1.4>Pb_<0.6>Sr_2Ca_2Cu_3O_x Superconducting Tapes by an Extrusion Method Using Paraffin Wax
スポンサーリンク
概要
- 論文の詳細を見る
Thick Bi_&lr;1.4>Pb_>0.6>Sr_2Ca_2Cu_3O_x superconducting tapes, which can flow practically high critical currents, are obtained continuously by the following process: (1) calcined Bi_<1.4>Pb_>0.6>Sr_2Ca_2Cu_3O_x particles, mixed with paraffin wax, are extruded through a nozzle to align platelike particles unidirectionally; (2) the paraffin wax, used as a matrix for workability, alone is burned out, taking care not to destroy the extruded configturation; (3) the burned out tapes are pressed to realize the denser configuration; and then (4) annealed at 850℃ for 100 h in air.
- 社団法人応用物理学会の論文
- 1991-06-01
著者
-
Suzuki Suguru
Ceramic Engineering Research Laboratory Nagoya Institute Of Technology
-
HIKICHI Yasuo
Department of Materials Science and Engineering, Nagoya Institute of Technology
-
Hikichi Yasuo
Ceramic Engineering Research Laboratory Nagoya Institute Of Technology
-
TAKAHASHI MINORU
Ceramic Research Laboratory, Nagoya Institute of Technology
-
Iwashita Kenji
Ceramic Engineering Research Laboratory Nagoya Institute Of Technology
-
Suzuki Setsu
School Of Science And Engineering Waseda University
-
Kato Hiroki
Ceramic Engineering Research Laboratory, Nagoya Institute of Technology
-
Kato Hiroki
Ceramic Engineering Research Laboratory Nagoya Institute Of Technology
-
Takahashi Minoru
Ceramic Engineering Research Laboratory Nagoya Institute Of Technology
関連論文
- Tailoring Thermally Induced Nano-Quasicrystallization and Deformation-Assisted Nanocrystallization for Mechanical Property Improvement in Zr-Al-Ni-Cu-Pd Bulk Metallic Glasses
- Temperature Dependence of the Ideality Factor of Ba_K_xBiO_3/Nb-doped SrTiO_3 All-Oxide-Type Schottky Junctions
- Effect of the Field Dependent Permittivity and Interfacial Layer on Ba_K_xBi0_3/Nb-Doped SrTi0_3 Schottky Junctions
- Space-Group Determination of a New Superconductor (Nd_Sr_Ce_)_2CuO_ Using Convergent-Beam Electron Diffraction
- Superconductivity in the Nd-Sr-Ce-Cu-O System : Electrical Properties of Condensed Matter
- Mechanical Property and Corrosion Resistance Evaluations of Ti-6Al-7Nb Alloy Brazed with Bulk Metallic Glasses
- Deformation-Induced Nanoscale Dynamic Transformation Studies in Zr-Al-Ni-Pd and Zr-Al-Ni-Cu Bulk Metallic Glasses
- Origin of the Effect of the Gas Atmosphere during Mold-Casting Zr_Al_Ni_Pd_ Bulk Glassy or Nano-Quasicrystal-Forming Alloy
- Characteristics of Shear Bands and Fracture Surfaces of Zr_Al_Ni_Pd_ Bulk Metallic Glass
- Influence of In-Situ Nanoprecipitation on Constant Load Deformation in the Glass Transition Region of a Cu_Zr_Ti_ Bulk Metallic Glass
- Microforming of Bulk Metallic Glasses : Constitutive Modelling and Applications
- Nanoporous Surfaces of FeAl Formed by Vacancy Clustering
- Strengthening Mechanisms in Al-Based and Zr-Based Amorphous Nanocomposites
- Heat of Evolution and Non-Newtonian Viscous Flow of Pd_Ni_P_ Glassy Alloy
- Crystallization of Zr_Al_Ni_5Cu_ Bulk Metallic Glass Composites Containing ZrC Particles
- Synthesis and Mechanical Properties of Zr_Al_Ni_5Cu_ Bulk Glass Composites Containing ZrC Particles Formed by the In-Situ Reaction
- Characterization of Ba_K_xBiO_3 Superconducting Thin Films for Three-Terminal Devices
- Preparation and Characteristics of a Superconducting Base Transistor with an Au/Ba_K_xBiO_3/Niobium-Doped SrTiO_3 Structure
- Junction Characteristics of an Au/Ba_K_xBiO_3/Niobium-Doped SrTiO_3 Structure
- Bulk Boundary Condition for Numerical Solution of Simultaneous Diffusion Equations of Phosphorus and Point Defects in Silicon
- One Bond-Type Migration of Phosphorus in Silicon by Interstitialcy Mechanism
- Atomic-Scale Characterization of Elastic Deformation of Zr-Based Metallic Glass under Tensile Stress
- Improvement of Plasticity in Pd Containing Zr-Al-Ni-Cu Bulk Metallic Glass by Deformation-Induced Nano Structure Change
- Property and Structure of YBa_2Cu_3O_-Nb_2O_5 Composite
- Novel fabrication route for porous ceramics using waste materials by non-firing process
- Observation of VUV Emission Spectra from DC Positive Corona Discharge
- Luminescence from Fluorescent Material Excited by Piezoelectric Transformer
- Luminous Phenomenon of Silent Discharge Using a Piezoelectric Transformer
- High-Luminance Thin-Film Electroluminescent Devices Using ((Y_2O_3)_-(GeO_2)_):Mn Phosphors : Optics and Quantum Electronics
- High-Luminance Thin Film Electroluminescent Devices Using Monoclinic Y_2O_3 Phosphor Activated with Mn : Optics and Quantum Electronics
- Observation of Capacitance Hunching at the Flat-Band-Voltage in Boron-Doped Diamond Metal/Insulator/Semiconductor Structure
- Efficient MIS Electric Field Effect on Diamond Thin Film Transistors
- Fermi Level Pinning in Metal-Insulator-Diamond Structures
- Efficient Field Effect in Heavily Doped Thin-Film Diamond Metal-Insulator-Semiconductor Diode Employing BaTiO_3 Insulator Film
- Characteristics of a Large-Bore Copper Vapor Laser with Gas-Cooling Plates
- Lower-Submicron Patterning Process for BiSrCaCuO High-T_c Superconducting Thin Films
- An Area Selective and Anisotropic Etching of Si by Synchrotron Radiation Excitation : Effects of Introducing O_2 Molecules
- Improvement in the Output Characteristics of a Large-Bore Copper Vapor Laser by Hydrogen
- Glow Auxiliary Electrical Discharge for CW High-Power CO_2 Lasers
- Interfacial Interaction between Nematic Liquid Crystal and Polymer in the Composite Film Consisting of Nematic Liquid Crystal and Connected Polymer Microspheres
- Ion Bombardment Enhanced Etching for Bi-Ca-Sr-Cu-O High-T_c Superconducting Thin Films : Etching and Deposition Technology
- Ion Bombardment Enhanced Etching for Bi-Ca-Sr-Cu-O High-T_c Superconducting Thin Films
- Property and Structure of YBa_2Cu_3O_x-Ag Composites Prepared from Nitrate Solutions
- Schematic Model for the Migration of Interstitialcy-Type Self-Interstitial Including the Middle State
- Property Control for High-Quality Ba_K_xBiO_3 Epitaxial Thin Films Prepared by High-Pressure Reactive rf-Magnetron Sputtering
- Photochemical Etching of GaAs using Synchrotron Radiation
- Mechanically Stacked GaAs/GaInAsP Dual-Junction Solar Cell with High Conversion Efficiency of More than 31%
- 5×5cm^2 GaAs and GaInAs Solar Cells with High Conversion Efficiency
- Effect of Substrate Orientation on Photoluminescence of GaNAs
- Exchange-Coupled Magnetic Bilayer Media for Thermomagnetic Writing and Flux Detection
- New Recording Method Combining Thermo-Magnetic Writing and Flux Detection
- Metalorganic Vapor Phase Epitaxial Growth of GaNAs Using Tertiarybutylarsine (TBA) and Dimethylhydrazine (DMHy)
- Deep-Submicron Single-Gate Complementary Metal Oxide Semiconductor (CMOS) Technology Using Channel Preamorphization
- Deep-Submicron Single-Gate CMOS Technology Using Channel Preamorphization
- Photoluminescence Analysis of plasma-deposited Oxygen-rich Silicon oxynitride Films
- High Storage Density Optical Recording with a Stable Micro Green Second Harmonic Generation Laser Consisting of Nd:YVO4 and KTP : High Density Recording
- High Storage Density Optical Recording with a Stable Micro Green Second Harmonic Generation Laser Consisting of Nd:YVO_4 and KTP
- Preparation of fine mullite powders with high surface area by agglomeration control of alkoxide-derived precursor sol
- Oxygen-Doped Si Epitaxial Film (OXSEF)
- Superconducting Glass-Ceramic Fine Rods in Bi_1Ca_1Sr_1Cu_2Al_O_x Prepared under a Temperature Gradient : T_c and the Texture of Specimen
- Graphitization behavior of polymer in the gelcasted alumina by sintering
- Effect of mixing condition of additives on the solidification of green body by gelcasting method
- Morphological control of ZnO particles synthesized via a new and facile aqueous solution route
- Effect of initial pH on formation of hollow calcium carbonate particles by continuous CO_2 gas bubbling into CaCl_2 aqueous solution
- Water absorption and retention of porous ceramics fabricated by waste resources( Innovative Ceramic Materials and Technologies for Global Environmental Protection)
- Synthesis of hexagonal ZnO microtubes by a simple soft aqueous solution method( Innovative Ceramic Materials and Technologies for Global Environmental Protection)
- A Novel One-step Solution Approach to Synthesize Tubular ZnO Nanostructures
- A Novel Approach to Synthesize Hollow Calcium Carbonate Particles
- Density Accumulation of a Magnetized Current-Carrying Plasma Caused by a Metal Disk
- Effect of Ionization on the Potential Distribance of a Current-Carrying Magnetized Plasma a Current-Carrying Magnetized Plasma Caused by a Metal Plate
- Negative Charge Density of a Magnetized Presheath Plasma with Two-Dimensional Ion Flux
- Influence of the Piezoelectric Effect on the Energy Levels of InGaAs/GaAs Strained Quantum Wells Grown on (311)A GaAs
- Structural Studies on the ZrO_2-Y_2O_3 System by Electron Diffraction and Electron Microscopy III
- Structural Studies on ZrO_2-Y_2O_3 System by Electron Diffraction and Electron Microscopy I
- Capacitance-Voltage Behavior of Insulated Gate InGaAs HEMT Capacitors Having Silicon Interface Control Layer
- Novel Insulated Gate InGaAs HEMT Technology Using Silicon Interface Control Layer
- Growth and Characterization of Vertical-Cavity Surface-Emitting Lasers Grown on (311)A-Oriented GaAs Substrates by Molecular Beam Epitaxy
- Enzyme-catalyzed synthesis of hydrated calcium oxalate
- Homogeneous precipitation of alumina precursors via enzymatic decomposition of urea
- Completely Erasable Phase Change Optical Disc II: Application of Ag-In-Sb-Te Mixed-Phase System for Rewritable Compact Disc Compatible with CD-Velocity and Double CD-Velocity
- High Linear Density Recording of 0.3 μm Domain Length on Magneto-Optical Disk : DRIVE TECHNOLOGY II
- Transparent observation of particle dispersion in alumina slurry using in situ solidification
- Microstructure Refinement and Texture Evolution of Titanium by Friction Roll Surface Processing
- Microstructural and Textural Evolution by Continuous Cyclic Bending and Annealing in a High Purity Titanium
- Improvement of Fatigue Properties by Means of Continuous Cyclic Bending and Annealing in an Al-Mg-Mn Alloy Sheet
- Deformation and Fracture at High Temperatures in an Al-Mg-Mn Alloy Sheet Consisting of Coarse- and Fine-Grained Layers
- Characterization of a Natural Barrier in an Au/Ba_K_XBiO_3 Junction
- High-Density Magneto-Optic Disk Using Highly Controlled Pit-Edge Recording : POST DEADLINE PAPERS
- Application of Mechano-chemical Process for Fabrication of Porous Ceramics from Waste Materials
- Thermal, mechanical and chemical properties of sintered monazite-(La, Ce, Nd or Sm)
- Fabrication of Thick Bi_Pb_Sr_2Ca_2Cu_3O_x Superconducting Tapes by an Extrusion Method Using Paraffin Wax
- Morphology and Sintering of CeO_2 Powders Produced by Homogeneous Precipitation Method
- Synthesis and thermal reactions of rhabdophane-(Y)
- Electrooptical Properties of Polymer Films Containing Nematic Liquid Crystal Microdroplets
- The Apparatus with a Microprocessor for the Photoluminescence Spectra Correction and Processing
- Effect of Surface Microstructure of Titanium Sheet on the Photocatalytic Activity of Its Oxide Film
- Silicon Epitaxy by Plasma Dissociation of Silane : C-3: CRYSTAL TECHNOLOGY
- Liquid phase synthesis of ZnO microrods highly oriented on the hexagonal ZnO sheets
- Surface properties of nanosize hollow silica particles on the molecular level