Strengthening Mechanisms in Al-Based and Zr-Based Amorphous Nanocomposites

スポンサーリンク

概要

• 論文の詳細を見る
• Japan Institute of Metalsの論文
• 2002-08-01

著者

• INOUE Akihisa

  Institute for Materials Research, Tohoku University

• KIM Hyoung

  Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTEC

• KATO Hidemi

  Institute for Materials Research, Tohoku University

• Hong S

  Chungnam National Univ. Daejeon Kor

• Kim H

  Department Of Metallurgical Engineering Chungnam National University

• Kato H

  Photon Factory High Energy Accelerator Research Organization

• Kato Hidemi

  Institute For Materials Research Tohoku University

• Kato Hiromichi

  Department Of Materials Science And Engineering Nagoya Institute Of Technology

• Inoue A

  Institute For Materials Research Tohoku University

• Inoue Akihisa

  Institute For Materials Research

• HONG Sun

  Department of Metallurgical Engineering, Chungnam National University

• Kato Hisayuki

  Semiconductor Design & Development Center Hitachi Ltd.

• Kato H

  Institute For Materials Research Tohoku University

• Kim Hyoung

  Department Of Aeronautics And Astronautics Graduate School Of Engineering Kyushu University

• Kim Hyoung

  Department Of Metallurgical Engineering Chungnam National University

• Kato Hiroki

  Ceramic Engineering Research Laboratory, Nagoya Institute of Technology

• Hong Sun

  Department Of Forest Resources Kookmin University

• Inoue Akihisa

  Institiute For Materials Resarch Tohoku University

関連論文

• Production of Ni65Cr15P16B4 metallic glass-coated bipolar plate for fuel cell by high velocity oxy-fuel (HVOF) spray coating method
• Friction Stir Welding of Zr_Cu_Ni_5Al_ Bulk Metallic Glass
• Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures
• Enhancement of Corrosion Resistance of Titanium-Copper Based Metallic Glass by Methylsiloxane Coating
• Interface Structure between Ti-Based Bulk Metallic Glasses and Hydroxyapatite Ceramics Jointed by Hydrothermal Techniques
• The Effect of Additional Elements on Hydrogen Permeation Properties of Melt-Spun Ni-Nb-Zr Amorphous Alloys
• Thermal Stability and Mechanical Properties of Glassy and Amorphous Ni-Nb-Zr Alloys Produced by Rapid Solidification
• Production of Ni_Cr_P_B_4 Metallic Glass-Coated Bipolar Plate for Fuel Cell by High Velocity Oxy-Fuel (HVOF) Spray Coating Method
• Soft Magnetic Properties of Ring Shape Bulk Glassy Fe-Al-Ga-P-C-B-Si Alloy Prepared by Copper Mold Casting
• Effect of Fe Content on the Glass-Forming Ability, Thermal Stability of Supercooled Liquid and Magnetic Properties of Fe_Al_5Ga_2(P_C_B_)_x Amorphous Alloys
• Preparation of Thick Amorphous Alloy Sheets in Multicomponent Fe-based Systems and Their Thermal and Magnetic Properties
• Oxide Glass/Amorphous Metal Alloy Laminated Membrane for Hydrogen Separation
• High Strength Ni-Fe-W and Ni-Fe-W-P Alloys Produced by Electrodeposition
• In-situ Electron Diffraction Study of Bulk Amorphous La_Al_Ni_ in the Supercooled Liquid Region
• Development of Ni-Pd-P-B Bulk Metallic Glasses with High Glass-Forming Ability
• Nucleation and Growth in Undercooled Melts of Bulk-Metallic-Glass Forming Zr_Ni_Al_ Alloy
• Microstructures of Pd_Ag_La_5 Alloy Studied by Transmission Electron Microscopy
• Heat Capacity and Thermodynamic Functions of Ni_Nb_Zr_ Glassy Alloy
• Mechanical Property and Corrosion Resistance Evaluations of Ti-6Al-7Nb Alloy Brazed with Bulk Metallic Glasses
• Deformation-Induced Nanoscale Dynamic Transformation Studies in Zr-Al-Ni-Pd and Zr-Al-Ni-Cu Bulk Metallic Glasses
• Origin of the Effect of the Gas Atmosphere during Mold-Casting Zr_Al_Ni_Pd_ Bulk Glassy or Nano-Quasicrystal-Forming Alloy
• Characteristics of Shear Bands and Fracture Surfaces of Zr_Al_Ni_Pd_ Bulk Metallic Glass
• A Fictive Stress Model Calculation of Creep Deformation of Zr-based Bulk Metallic Glass in the Glass Transition Region under a Constant Load
• Influence of In-Situ Nanoprecipitation on Constant Load Deformation in the Glass Transition Region of a Cu_Zr_Ti_ Bulk Metallic Glass
• Microforming of Bulk Metallic Glasses : Constitutive Modelling and Applications
• In Situ Observation of Stress-Induced Structural Disorder and Fictive Stress in a Zr_Al_Cu_ Glassy Alloy
• Nanoporous Surfaces of FeAl Formed by Vacancy Clustering
• Deformation Behavior of Pt-based Metallic Glass at Elevated Temperatures
• Strengthening Mechanisms in Al-Based and Zr-Based Amorphous Nanocomposites
• Heat of Evolution and Non-Newtonian Viscous Flow of Pd_Ni_P_ Glassy Alloy
• Crystallization of Zr_Al_Ni_5Cu_ Bulk Metallic Glass Composites Containing ZrC Particles
• Synthesis and Mechanical Properties of Zr_Al_Ni_5Cu_ Bulk Glass Composites Containing ZrC Particles Formed by the In-Situ Reaction
• Transition from Linear to Nonlinear Viscoelasticity during Deformation in a Zr-based Glassy Alloy
• A Fictive Stress Model Calculationof Nonlinear Viscoelastic Behaviors in a Zr-Based Glassy Alloy : Stress Growth and Relaxation
• A Fictive Stress Model Calculation of Stress-Overshoot : A Nonlinear Viscoelastic Behavior in Metallic Glass
• Microstructure of Superplastic Zr_Al_Ni_Cu_ Metallic Glass
• Elevated-Temperature Al-Ti-Fe-Cr Alloys with High Ductility at High-Strain-Rates
• High Tensile Strength Bulk Glassy Alloy Zr_Al_Ni_Cu_ Prepared by Extrusion of Atomized Glassy Powder
• Effect of Cu and P on the Crystallization Behavior of Fe-Rich Hetero-Amorphous FeSiB Alloy
• Fe-Rich Soft Magnetic FeSiBPCu Hetero-Amorphous Alloys with High Saturation Magnetization
• Displacement Behavior Study of the Shear Stress Effect on the Early Viscous Flow Nature of Fe-B-Nb-Y Metallic Glassy Powder in Spark Plasma Sintering
• Preparation of Bulk Glassy Fe_Si_9B_P_5 as a Soft Magnetic Material by Spark Plasma Sintering
• FeSiBPCu Nanocrystalline Soft Magnetic Alloys with High B_s of 1.9 Tesla Produced by Crystallizing Hetero-Amorphous Phase
• Effect of Cr Addition on the Glass-Forming Ability, Magnetic, Mechanical and Corrosion Properties of (Fe_Si_B_P_)_Cr_x Bulk Glassy Alloys
• Relationship between Microstructures and Soft Magnetic Properties of Simultaneously P and Cu-Added Fe-Nb-B Ribbon Alloys
• Direct Synthesis of L1_0 (Fe_Pt_)_Zr_B_ Nanocrystalline Alloys with High Coercivity by Melt-Spinning
• Magnetization Process and Coercivity of Fe-(Al, Ga)-(P, C, B, Si) Soft Magnetic Glassy Alloys
• Origin of Low Coercivity of Fe-(Al, Ga)-(P, C, B, Si, Ge) Bulk Glassy Alloys
• Random Anisotropy Model for Nanocrystalline Soft Magnetic Alloys with Grain-Size Distribution
• Soft Magnetic Properties of Nanocrystalline Fe-Nb-B-P Alloys Produced in the Atmosphere by Melt-Spinning Method
• Microstructure and Mechanical Properties of P/M Al-V-Fe and Al-Fe-M-Ti (M = V, Cr, Mn) Alloys Containing Dispersed Quasicrystalline Particles
• New Amorphous Alloys in Al-Ti Binary System
• Development of Common Mode Choke Coil Made of New Nanocrystalline Soft Magnetic Alloy "NANOPERM^[○!R]"
• High Strength Al-Ti-Fe Alloys Consisting of Amorphous and fcc-Al Phases Prepared by Rapid Solidification
• High Mechanical Strength of Al-(V, Cr, Mn)-(Fe, Co, Ni)Quasicrystalline Alloys Prepared by Rapid Solidification
• Faceted Etch Pits Formed on Surfaces of an Icosahedral Al_Pd_Mn_ Quasicrystal
• New Class of Amorphous and Icosahedral Phases in Zn-Mg-Rare-Earth Metal Alloys
• Magnetic Properties and Phase Stability of Icosahedral Al-Pd-Mn-B Quasicrystals
• Formation of Nanocrystalline Structures by Crystallization of Amorphous Fe-M-B (M=IVa to VIa Group Metal) Alloys
• Novel Face-Centered Icosahedral Phase in Al-Mg-Li System
• Mechanical Behavior of Amorphous Alloys at Elevated Temperatures
• Electron Microscope Study of Decagonal Quasicrystals of Al_Ni_Fe_
• Temperature Dependence of Hardness and Expansion in an Icosahedral Al-Pd-Mn Alloy
• Stable One-Dimensional Quasi Crystal in a Al-Cu-Fe-Mn System
• Crystallization-Induced Phason Relaxation in Icosahedral Al-Pd-Mn Alloys
• Production of Glassy Coil Springs by Warm Coiling of Zr-based Glassy Alloy Wires
• Fillability and Imprintability of High-strength Ni-based Bulk Metallic Glass Prepared by the Precision Die-casting Technique
• Fe-B-Si-Nb Bulk Metallic Glasses with High Strength above 4000MPa and Distinct Plastic Elongation
• Fabrication of Bulk Glassy Hf_Cu_Ni_Al_ Alloy by Copper Mold Casting
• Formation and Mechanical Properties of Ti-Zr-Ni-Cu Amorphous Alloy Containing Icosahedral Nanoscale Quasicrystalline Phase
• Bulk Glass Formation of Ti-Zr-Hf-Cu-M (M=Fe, Co, Ni) Alloys
• Ni-Rich Bulk Metallic Glasses with High Glass-Forming Ability and Good Metallic Properties
• Formation of a Ni-Based Glassy Alloy in Centimeter Scale
• New Amorphous Alloys with Good Ductility in Al-Ce-M (M=Nb, Fe, Co, Ni or Cu) Systems : Condensed Matter
• Preparation of Fe_Co_Ga_5P_C_4B_4 Bulk Glassy Alloy with Good Soft Magnetic Properties by Spark-Plasma Sintering of Glassy Powder
• Structure and Magnetic Properties of Fe_Co_Nb_7B_8 Nanocrystalline Alloy
• Bulk Glassy Co_Fe_Ta_B_ Alloy with High Glass-Forming Ability and Good Soft Magnetic Properties
• (Fe, Co)-(Hf, Nb)-B Glassy Thick Sheet Alloys Prepared by a Melt Clamp Forging Method
• The Liquid-Enhanced Plasticity and Deformation Behavior of Cu-Mg-TiC Nanocrystalline Composite
• Bulk Glassy Fe_Co_xGa_2P_C_4B_4 Alloys with High Saturation Magnetization and Good Soft Magnetic Properties
• Bulk Glassy Fe-Ga-P-C-B Alloys with High Saturation Magnetization and Good Soft Magnetic Properties Synthesized by Fluxing Treatment and Copper Mold Casting
• Bulk Amorphous Fe-P-B-C Alloys with a Large Supercooled Liquid Region
• New Ti-Based Bulk Glassy Alloys with High Glass-Forming Ability and Superior Mechanical Properties
• Formation of New Ti-based Metallic Glassy Alloys
• Soft Magnetic Properties of Fe-Based Bulk Amorphous Alloys
• Densification of Gas Atomized Ni-Based Metallic Glassy Powders by Spark Plasma Sintering
• Microwave Sintering of Ni-Based Bulk Metallic Glass Matrix Composite in a Single-Mode Applicator
• Unusual Glass-Forming Ability of New Zr-Cu-Based Bulk Glassy Alloys Containing an Immiscible Element Pair
• Glass Forming Ability and Mechanical Properties of New Ni-Based Bulk Metallic Glasses
• Fabrication of New Cu_Pd_2Zr_Ag_8Al_8 Bulk Glassy Alloy with a Diameter of 30mm
• Unusual Plasticity of the Particulate-Reinforced Cu-Zr-Based Bulk Metallic Glass Composites
• Influence of Al and Ag on the Devitrification Behavior of a Cu-Zr Glassy Alloy
• Transition from Plasticity to Brittleness in Cu-Zr-Based Bulk Metallic Glasses
• Microstructural Changes during Microwave Heating of Ni_Zr_Nb_Ti_Pt_ Metal Glasses
• Preparation of Cu_Zr_Ag_8Al_8 Bulk Metallic Glass with a Diameter of 25mm by Copper Mold Casting
• Fabrication of ZrCuAlNi Metallic Glassy Matrix Composite Containing ZrO_2 Particles by Spark Plasma Sintering Process
• Bulk Metallic Glass Formation near a Quaternary Cu-Zr-Ti-Al Eutectic Point
• Nanocrystallization of Cu_Zr_Ti_5 Metallic Glass Induced by Electron Irradiation
• Formation and Properties of New La-Based Bulk Glassy Alloys with Diameters up to Centimeter Order
• Synthesis and Thermal Stability of New Ni-Based Bulk Glassy Alloy with Excellent Mechanical Properties

もっと見る 閉じる

スポンサーリンク