The Liquid-Enhanced Plasticity and Deformation Behavior of Cu-Mg-TiC Nanocrystalline Composite

スポンサーリンク

概要

• 論文の詳細を見る
• Japan Institute of Metalsの論文
• 2001-08-20

著者

• KIMURA Hisamichi

  Institute for Materials Research, Tohoku University

• INOUE Akihisa

  Institute for Materials Research, Tohoku University

• Inoue A

  Tohoku Univ. Sendai

• Inoue Akihisa

  Institute For Materials Research

• SHEN Baolong

  Institute for Materials Research, Tohoku University

• YAMASAKI Tohru

  Department of Materials Science and Engineering, Faculty of Engineering, Himeji Institute of Technol

• OGINO Yoshikiyo

  Department of Materials Science and Engineering, Faculty of Engineering, Himeji Institute of Technol

• SHEN Bao-lang

  Institute for Materials Research, Tohoku University

• Yamasaki Tohru

  Department Of Earth Sciences Faculty Of Science Yamaguchi University

• Yamasaki Tohru

  Department Of Materials Science And Engineering Faculty Of Engineering Himeji Institute Of Technolog

• Kimura Hisamichi

  Institute For Material Research Tohoku University

• Inoue Akihisa

  Institute Of Materials Research Tohoku University

• Shen Bao-lang

  Inoue Superliquid Glass Project Erato Japan Science Technology Corporation

• Shen Baolong

  Institute For Materials Research Tohoku University

• Ogino Yoshikiyo

  Department Of Materials Science And Engineering Faculty Of Engineering Himeji Institute Of Technolog

• Inoue Akihisa

  Institiute For Materials Resarch Tohoku University

関連論文

• Thermal Fatigue Cracking and Extension Behaviors of Squeeze Infiltrated Al_B_4O_/Mg Functionally Graded Materials
• Production of Ni65Cr15P16B4 metallic glass-coated bipolar plate for fuel cell by high velocity oxy-fuel (HVOF) spray coating method
• Friction Stir Welding of Zr_Cu_Ni_5Al_ Bulk Metallic Glass
• Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures
• Enhancement of Corrosion Resistance of Titanium-Copper Based Metallic Glass by Methylsiloxane Coating
• Interface Structure between Ti-Based Bulk Metallic Glasses and Hydroxyapatite Ceramics Jointed by Hydrothermal Techniques
• The Effect of Additional Elements on Hydrogen Permeation Properties of Melt-Spun Ni-Nb-Zr Amorphous Alloys
• Thermal Stability and Mechanical Properties of Glassy and Amorphous Ni-Nb-Zr Alloys Produced by Rapid Solidification
• Production of Ni_Cr_P_B_4 Metallic Glass-Coated Bipolar Plate for Fuel Cell by High Velocity Oxy-Fuel (HVOF) Spray Coating Method
• Soft Magnetic Properties of Ring Shape Bulk Glassy Fe-Al-Ga-P-C-B-Si Alloy Prepared by Copper Mold Casting
• Effect of Fe Content on the Glass-Forming Ability, Thermal Stability of Supercooled Liquid and Magnetic Properties of Fe_Al_5Ga_2(P_C_B_)_x Amorphous Alloys
• Preparation of Thick Amorphous Alloy Sheets in Multicomponent Fe-based Systems and Their Thermal and Magnetic Properties
• Oxide Glass/Amorphous Metal Alloy Laminated Membrane for Hydrogen Separation
• High Strength Ni-Fe-W and Ni-Fe-W-P Alloys Produced by Electrodeposition
• In-situ Electron Diffraction Study of Bulk Amorphous La_Al_Ni_ in the Supercooled Liquid Region
• Development of Ni-Pd-P-B Bulk Metallic Glasses with High Glass-Forming Ability
• Nucleation and Growth in Undercooled Melts of Bulk-Metallic-Glass Forming Zr_Ni_Al_ Alloy
• Microstructures of Pd_Ag_La_5 Alloy Studied by Transmission Electron Microscopy
• Heat Capacity and Thermodynamic Functions of Ni_Nb_Zr_ Glassy Alloy
• Microstructure and Corrosion Properties of Mg-xSn-5Al-1Zn(x=0, 1, 5 and 9mass%) Alloys
• The Effect of Trace Addition of Strontium and Zinc on the Creep Properties of Mg-6Sn-5Al-2Si Alloys
• Microstructure and Mechanical Properties of P/M Al-V-Fe and Al-Fe-M-Ti (M = V, Cr, Mn) Alloys Containing Dispersed Quasicrystalline Particles
• New Amorphous Alloys in Al-Ti Binary System
• High Strength Al-Ti-Fe Alloys Consisting of Amorphous and fcc-Al Phases Prepared by Rapid Solidification
• High Mechanical Strength of Al-(V, Cr, Mn)-(Fe, Co, Ni)Quasicrystalline Alloys Prepared by Rapid Solidification
• Thermal Stability and Soft Magnetic Properties of Fe-Co-Ga-P-C-B Alloys with High Glass-Forming Ability
• Preparation of Fe_Co_Ga_5P_C_4B_4 Bulk Glassy Alloy with Good Soft Magnetic Properties by Spark-Plasma Sintering of Glassy Powder
• Structure and Magnetic Properties of Fe_Co_Nb_7B_8 Nanocrystalline Alloy
• Bulk Glassy Co_Fe_Ta_B_ Alloy with High Glass-Forming Ability and Good Soft Magnetic Properties
• The Liquid-Enhanced Plasticity and Deformation Behavior of Cu-Mg-TiC Nanocrystalline Composite
• Bulk Glassy Fe_Co_xGa_2P_C_4B_4 Alloys with High Saturation Magnetization and Good Soft Magnetic Properties
• Bulk Glassy Fe-Ga-P-C-B Alloys with High Saturation Magnetization and Good Soft Magnetic Properties Synthesized by Fluxing Treatment and Copper Mold Casting
• Densification of Gas Atomized Ni-Based Metallic Glassy Powders by Spark Plasma Sintering
• Fabrication of ZrCuAlNi Metallic Glassy Matrix Composite Containing ZrO_2 Particles by Spark Plasma Sintering Process
• Influences of Temperature and Strain Rate on Mechanical Behavior of a Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy
• Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy with Enhanced Compressive Strength and Plasticity at Cryogenic Temperature
• Annealing-Induced Devitrification Behavior of a Ti_Zr_Ni_Cu_ Glassy Alloy
• Corrosion Behavior of Ti-Based Metallic Glasses
• Preparation of a Wide Zr_Al_Ni_5Cu_ Metallic Glass Sheet by a Twin-Roller Type Casting Method and Its Mechanical Properties
• Mechanical Properties of Melt-Spun Amorphous Ni-Nb-Zr Alloys after Hydrogen Charging
• Fracture Toughness of Zr_Al_Ni_5Cu_ Bulk Metallic Glass by 3-Point Bend Testing
• Effect of Tantalum on Corrosion Resistance of Ni-Nb(-Ta)-Ti-Zr Glassy Alloys at High Temperature
• New Cu-Zr-Al-Nb Bulk Glassy Alloys with High Corrosion Resistance
• Excellent Mechanical Properties of Cu-Hf-Ti-Ta Bulk Glassy Alloys Containing In-Situ Dendrite Ta-based BCC Phase
• Fatigue Behaviors of Ultra Fine Wires of β-Type and α-Type Titanium Alloys
• Developments of Aluminum- and Magnesium-Based Nanophase High-Strength Alloys by Use of Melt Quenching-Induced Metastable Phase
• Structural Analysis of Melt-Spun Mg_xPd_ (x = 70, 80, 85 and 90) Amorphous Alloys
• X-ray Diffraction Study for Mg_4Pd Crystalline and Amorphous Alloys Using Synchrotron Radiation
• Glass Transition Behavior of Al-Y-Ni and Al-Ce-Ni Amorphous Alloys : Condensed Matter
• Production of Bi-Sr-Ca-Cu-O Glasses by Liquid Quenching and their Glass Transition and Structural Relaxation : Condensed Matter
• Undercooling Behavior and Critical Cooling Rate of Pd-Pt-Cu-P Alloy
• Isothermal Relaxation Behavior in a Pd_Cu_Ni_P_ Metallic Glass
• Electrical Resistivity and Mossbauer Studies for the Structural Relaxation Process in Pd-Cu-Ni-P Glasses
• Bulk Glassy Fe-Co-Ga-P-C-B Alloys with High Glass-Forming Ability, High Saturation Magnetization and Good Soft Magnetic Properties
• High Strength and Good Soft Magnetic Properties of Bulk Glassy Fe-Mo-Ga-P-C-B Alloys with High Glass-Forming Ability
• New Pd-Based Bulk Glassy Alloys with High Glass-Forming Ability and Large Supercooled Liquid Region
• Effect of B Addition on the Extension of Supercooled Liquid Region in Zr-Cu-Al Base Amorphous Alloys
• Preparation and Thermal Stability of Bulk Amorphous Pd_Cu_Ni_P_ Alloy Cylinder of 72mm in Diameter
• Effect of B Addition Extension of Supercooled Liquid Region before Crystallization in Pd-Cu-Si Amorphous Alloys
• Temperature-Time-Transformation Curve and Viscous Flow Deformation of Zr_Cu_Al_Ni_5 Bulk Glassy Alloy
• Production of Bulk Glassy Alloy Parts by a Levitation Melting-Forging Method
• Consolidation of Fe-Co-Nd-Dy-B Glassy Powders by Spark-Plasma Sintering and Magnetic Properties of the Consolidated Alloys
• Glass-Forming Ability, Crystallized Structure and Magnetic Properties of Fe_Co_Nd_3Dy_B_ Glassy Alloy with Large Supercooled Liquid Region
• Corrosion Behavior of Zr-(Nb-)Al-Ni-Cu Glassy Alloys
• Cutting Characteristics of Bulk Metallic Glass
• Effect of Pre-Introduced Shear Bands Direction on Deformation Behavior in Zr_Al_Ni_5Cu_ Bulk Metallic Glass
• Effects of Size and Volume Fraction of Precipitated Crystalline Phase Induced by Friction Stir Processing on Hardness in Zr-Al-Ni-Cu Bulk Metallic Glass
• Hydrogen Sensors Using Pd-Based Metallic Glassy Alloys
• Analysis of 3D Random Al_B_4O_ Whisker Reinforced Mg Composite Using FEM and Random Sequential Adsorption
• Thermal, Mechanical and Physical Properties of Supercooled Liquid in Pd-Cu-Ni-P Amorphous Alloy
• High T_c Superconductivity of a Melt-Spun Er_1Ba_2Cu_3 Oxide Ribbon
• Development of W-Reinforced Zr-Based Metallic Glass
• Shape Memory Effect and Magnetostriction in Rapidly Solidified Fe-29.6at%Pd Alloy
• Preparation of Highly Active Methanol Steam Reforming Catalysts from Glassy Cu-Zr Alloys with Small Amount of Noble Metals
• Microstructure of Bonding Interface for Resistance Welding of Zr-Based Metallic Glass Sheets
• The Effect of Cerium on Microstructures and Mechanical Properties of Mg-4Al-2Sn-1Ca Alloy
• Alloying Effect on the Hydrogen Sensing Property of Melt-Spun Mg_Pd_ Amorphous Alloy
• Viscous Flow Workability of Ni-Cr-P-B Metallic Glasses Produced by Melt-Spinning in Air
• Effect of Cold Drawing on Electrical and Mechanical Properties of Cu-5 at% Zr Alloy
• Crystallization Kinetics of Ti_Ni_Cu_ Melt-Spun Amorphous Ribbons
• Enganced Shot Peening Effect for Steels by Using Fe-based Glassy Alloy Shots
• Formation, Thermal Stability and Mechanical Properties of Aluminum-Based Glassy Alloys Containing Boron
• Thermal Stability and Mechanical Properties of Ti_Cu_Zr_TM_(TM = Co, Fe) Metallic Glass Sheets Prepared by Twin-Roller Casting Method
• Crystalline Texture and Magnetostriction in Rapid-Solidified Fe-Pd Alloy Ribbons
• Mechanical Properties and Electrical Conductivity of Heavily Cold-Rolled Cu_Zr_x Alloys (x=0-8)
• Thermal stability of Pd-based metallic glasses examined by electrical resistance measurement
• High T_c Superconductor Prepared by Oxidization of a Liquid-Quenched Yb_1Ba_2Cu_3 Alloy Foil in Air
• Formation of a Nanoscale hcp Structure by Crystallization of an Amorphous Co_Zr_7B_2 Alloy
• Nanometer-Scale Structure of Rapidly Solidified Al_V_3Fe_3Zr_2 Alloy
• Formation, Thermal Stability and Mechanical Properties of New Amorphous Al_Fe_Zr_1 Alloy
• Application of a Hydrogen Storage Alloy with an Amorphous Phase for Sensing Hydrogen in Water
• Relations between the Electrical Resistance and Hydrogen Absorption/Desorption for Melt-Spun Mg_Al_3Pd_ and Ni_Nb_Zr_ Amorphous Alloys
• Effect of Hydrogen Absorption on the Electrical Resistance of Melt-Spun Mg-Pd and Mg-Ni-Pd Amorphous Alloys
• Development of Glassy Alloy Separators for a Proton Exchange Membrane Fuel Cell (PEMFC)
• Increase in Thermal Stability of Mg_Ni_Ca_5 Amorphous Alloy by Absorption of Hydrogen
• Composition Control of Pd-Cu-Si Metallic Glassy Alloys for Thin Film Hydrogen Sensor
• Influence of Precipitation Behavior of Different Crystalline Phases for Embrittlement Behavior of Several Zr-Based Metallic Glasses
• Ultrahigh Strength and High Electrical Conductivity Characteristics of Cu-Zr Alloy Wires with Nanoscale Duplex Fibrous Structure
• High-Throughput Screening of Ultraviolet-Visible Magnetooptical Properties of Spinel Ferrite (Zn, Co)Fe_2O_4 Solid Solution Epitaxial Film by a Composition-Spread Approach
• Suppression of Crystallization in Ti-Based Alloys by Fluxing

もっと見る 閉じる

スポンサーリンク