Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures

スポンサーリンク

概要

• 論文の詳細を見る
• Japan Institute of Metalsの論文
• 2009-11-01

著者

• KIMURA Hisamichi

  Institute for Materials Research, Tohoku University

• 木村 久道

  東北大学金属材料研究所

• INOUE Akihisa

  Institute for Materials Research, Tohoku University

• 張 涛

  Department Of Materials Science And Engineering Beijing University Of Aeronautics And Astronautics

• 井上 明久

  東北大学

• 浅見 勝彦

  東北大学金属材料研究所

• KAWASHIMA Asahi

  Institute for Materials Research, Tohoku University

• YOKOYAMA Yoshihiko

  Institute for Materials Research, Tohoku University

• SEKI Ichiro

  Institute for Materials Research, Tohoku University

• KURISHITA Hiroaki

  International Research Center for Nuclear Materials Science, Institute for Materials Research, Tohok

• FUKUHARA Mikio

  Institute for Materials Research, Tohoku University

• Yokoyama Yoshihiko

  Institute For Materials Research Tohoku University

• 浅見 勝彦

  東北大・金研

• Kurishita Hiroaki

  International Research Center For Nuclear Materials Science Institute For Materials Research Tohoku

• Kurishita Hiroaki

  International Research Center For Nuclear Material Science Institute For Material Research Tohoku Un

• Yokoyama Y

  Inst. For Materials Res. Tohoku Univ.

• 井上 明久

  東北大学 金属材料研究所

• 井上 明久

  東北大

• Zhang Tao

  State Key Laboratory Of Catalysis Dalian Institute Of Chemical Physics Chinese Academy Of Sciences

• 栗下 裕明

  東北大学金属材料研究所

• Kawashima A

  Tohoku Univ. Ibaraki Jpn

• Seki Ichiro

  Institute For Materials Research Tohoku University

• Seki Ichiro

  Inst. For Materials Res. Tohoku Univ.

• Yamada Y

  Department Of Quantum Science And Energy Engineering Tohoku University

• Inoue Akihisa

  Department Of Materials Science Osaka Prefecture University

• Fukuhara Mikio

  Inst. For Materials Res. Tohoku Univ.

• Fukuhara Mikio

  Institute For Materials Research Tohoku University

• Yamamoto Yuichi

  Division Of Electronic And Information Engineering Faculty Of Technology Tokyo University Of Agricul

• Inoue Akihisa

  Wpi Advanced Institute For Materials Research Tohoku University

• Inoue A

  Tohoku Univ. Sendai

• Inoue Akihisa

  Institute For Materials Research

• Asami K

  Institute For Materials Research Tohoku University

• Yamamoto Y

  Nara Inst. Sci. And Technol. Nara Jpn

• Kimura Hisamichi

  Institute Of Materials Research Tohoku University

• Kimura Hisamichi

  Institute For Material Research Tohoku University

• Inoue Akihisa

  Wpi-advanced Institute For Materials Research Tohoku University

• Kawashima Asahi

  Institute For Materials Research Tohoku University

• Inoue Akihisa

  Wpi Advanced Inst. For Materials Res. Tohoku Univ.

• Inoue Akihisa

  Wpi Tohoku University

• Yokoyama Yoshihiko

  Inst. For Materials Res. Tohoku Univ.

• Yamamoto Yasufumi

  Research And Technical Service Laboratory Du Pont-mitsui Polychemicals Co. Ltd.

• Yamamoto Yukio

  Department Of Electrical Engineering Fukui National College Of Technology

• Yamamoto Y

  Material Science Japan Advanced Institute Of Science And Technology

• Inoue Akihisa

  Institiute For Materials Resarch Tohoku University

• 木村 久道

  Inst. For Materials Res. Tohoku Univ.

• Kawashima Asahi

  Tohoku Univ. Sendai Jpn

• YAMAMOTO Yujiroh

  Department of Physics, School of Science and Engineering, Waseda University

関連論文

• Thermal Fatigue Cracking and Extension Behaviors of Squeeze Infiltrated Al_B_4O_/Mg Functionally Graded Materials
• 22pPSA-16 TbZn_2の強磁場磁化曲線(22pPSA 領域3ポスターセッション(酸化物・f電子系磁性・スピングラス・量子スピン・フラストレーション系・実験技術・磁性一般),領域3(磁性,磁気共鳴))
• 各種ケイ酸ガラスとZr基金属ガラスの陽極接合界面
• 摩擦攪拌接合によるZr基金属ガラス/純Alの異材接合
• ガストンネル型プラズマ溶射によるNi基金属ガラス膜の性質
• 232 Ni基金属ガラス箔の溶接性と重ね継手特性(溶接冶金(VI),平成20年度春季全国大会)
• Friction Stir Welding of Zr_Cu_Ni_5Al_ Bulk Metallic Glass
• 401 Zr_Cu_Ni_5Al_金属ガラスの摩擦攪拌接合(金属ガラス,平成20年度秋季全国大会)
• ガストンネル型プラズマ溶射を用いて作製したZr基金属ガラス膜の組織構造とその性質
• 1145 超急冷 TiNiCu 系合金薄帯の相変態と材料特性
• Al-Cr準結晶および結晶相の磁性と電気抵抗(クエイサイクリスタルの構造と物性,科研費研究会報告)
• 放電プラズマ焼結(SPS)法によるFeO、Fe2O3、Fe3O4の焼結
• 放電プラズマ焼結法によるFe-Co-Ga-P-C-Bガラス合金粉末のバルク化とその磁気特性
• 擬似等方圧下でのMAアモルファス粉末のパルス放電抵抗焼結
• Cu-Zr-Ag-Alバルク金属ガラスの平面ひずみ破壊靱性
• 405 金属ガラス複合材料の作製(金属ガラス,平成20年度秋季全国大会)
• Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures
• Thermal Stability and Mechanical Properties of Glassy and Amorphous Ni-Nb-Zr Alloys Produced by Rapid Solidification
• Microstructures of Pd_Ag_La_5 Alloy Studied by Transmission Electron Microscopy
• Microstructure and Corrosion Properties of Mg-xSn-5Al-1Zn(x=0, 1, 5 and 9mass%) Alloys
• The Effect of Trace Addition of Strontium and Zinc on the Creep Properties of Mg-6Sn-5Al-2Si Alloys
• Microstructure and Mechanical Properties of P/M Al-V-Fe and Al-Fe-M-Ti (M = V, Cr, Mn) Alloys Containing Dispersed Quasicrystalline Particles
• New Amorphous Alloys in Al-Ti Binary System
• High Strength Al-Ti-Fe Alloys Consisting of Amorphous and fcc-Al Phases Prepared by Rapid Solidification
• High Mechanical Strength of Al-(V, Cr, Mn)-(Fe, Co, Ni)Quasicrystalline Alloys Prepared by Rapid Solidification
• Thermal Stability and Soft Magnetic Properties of Fe-Co-Ga-P-C-B Alloys with High Glass-Forming Ability
• Preparation of Fe_Co_Ga_5P_C_4B_4 Bulk Glassy Alloy with Good Soft Magnetic Properties by Spark-Plasma Sintering of Glassy Powder
• Structure and Magnetic Properties of Fe_Co_Nb_7B_8 Nanocrystalline Alloy
• Bulk Glassy Co_Fe_Ta_B_ Alloy with High Glass-Forming Ability and Good Soft Magnetic Properties
• The Liquid-Enhanced Plasticity and Deformation Behavior of Cu-Mg-TiC Nanocrystalline Composite
• Bulk Glassy Fe_Co_xGa_2P_C_4B_4 Alloys with High Saturation Magnetization and Good Soft Magnetic Properties
• Bulk Glassy Fe-Ga-P-C-B Alloys with High Saturation Magnetization and Good Soft Magnetic Properties Synthesized by Fluxing Treatment and Copper Mold Casting
• Densification of Gas Atomized Ni-Based Metallic Glassy Powders by Spark Plasma Sintering
• Fabrication of ZrCuAlNi Metallic Glassy Matrix Composite Containing ZrO_2 Particles by Spark Plasma Sintering Process
• Influences of Temperature and Strain Rate on Mechanical Behavior of a Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy
• Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy with Enhanced Compressive Strength and Plasticity at Cryogenic Temperature
• Annealing-Induced Devitrification Behavior of a Ti_Zr_Ni_Cu_ Glassy Alloy
• Corrosion Behavior of Ti-Based Metallic Glasses
• Preparation of a Wide Zr_Al_Ni_5Cu_ Metallic Glass Sheet by a Twin-Roller Type Casting Method and Its Mechanical Properties
• Mechanical Properties of Melt-Spun Amorphous Ni-Nb-Zr Alloys after Hydrogen Charging
• Fracture Toughness of Zr_Al_Ni_5Cu_ Bulk Metallic Glass by 3-Point Bend Testing
• Effect of Tantalum on Corrosion Resistance of Ni-Nb(-Ta)-Ti-Zr Glassy Alloys at High Temperature
• New Cu-Zr-Al-Nb Bulk Glassy Alloys with High Corrosion Resistance
• Excellent Mechanical Properties of Cu-Hf-Ti-Ta Bulk Glassy Alloys Containing In-Situ Dendrite Ta-based BCC Phase
• Fatigue Behaviors of Ultra Fine Wires of β-Type and α-Type Titanium Alloys
• Developments of Aluminum- and Magnesium-Based Nanophase High-Strength Alloys by Use of Melt Quenching-Induced Metastable Phase
• Structural Analysis of Melt-Spun Mg_xPd_ (x = 70, 80, 85 and 90) Amorphous Alloys
• X-ray Diffraction Study for Mg_4Pd Crystalline and Amorphous Alloys Using Synchrotron Radiation
• Glass Transition Behavior of Al-Y-Ni and Al-Ce-Ni Amorphous Alloys : Condensed Matter
• Production of Bi-Sr-Ca-Cu-O Glasses by Liquid Quenching and their Glass Transition and Structural Relaxation : Condensed Matter
• Undercooling Behavior and Critical Cooling Rate of Pd-Pt-Cu-P Alloy
• Isothermal Relaxation Behavior in a Pd_Cu_Ni_P_ Metallic Glass
• Electrical Resistivity and Mossbauer Studies for the Structural Relaxation Process in Pd-Cu-Ni-P Glasses
• Bulk Glassy Fe-Co-Ga-P-C-B Alloys with High Glass-Forming Ability, High Saturation Magnetization and Good Soft Magnetic Properties
• High Strength and Good Soft Magnetic Properties of Bulk Glassy Fe-Mo-Ga-P-C-B Alloys with High Glass-Forming Ability
• New Pd-Based Bulk Glassy Alloys with High Glass-Forming Ability and Large Supercooled Liquid Region
• Effect of B Addition on the Extension of Supercooled Liquid Region in Zr-Cu-Al Base Amorphous Alloys
• Preparation and Thermal Stability of Bulk Amorphous Pd_Cu_Ni_P_ Alloy Cylinder of 72mm in Diameter
• Effect of B Addition Extension of Supercooled Liquid Region before Crystallization in Pd-Cu-Si Amorphous Alloys
• Temperature-Time-Transformation Curve and Viscous Flow Deformation of Zr_Cu_Al_Ni_5 Bulk Glassy Alloy
• Production of Bulk Glassy Alloy Parts by a Levitation Melting-Forging Method
• Consolidation of Fe-Co-Nd-Dy-B Glassy Powders by Spark-Plasma Sintering and Magnetic Properties of the Consolidated Alloys
• Glass-Forming Ability, Crystallized Structure and Magnetic Properties of Fe_Co_Nd_3Dy_B_ Glassy Alloy with Large Supercooled Liquid Region
• Corrosion Behavior of Zr-(Nb-)Al-Ni-Cu Glassy Alloys
• Cutting Characteristics of Bulk Metallic Glass
• Effect of Pre-Introduced Shear Bands Direction on Deformation Behavior in Zr_Al_Ni_5Cu_ Bulk Metallic Glass
• Effects of Size and Volume Fraction of Precipitated Crystalline Phase Induced by Friction Stir Processing on Hardness in Zr-Al-Ni-Cu Bulk Metallic Glass
• Hydrogen Sensors Using Pd-Based Metallic Glassy Alloys
• Analysis of 3D Random Al_B_4O_ Whisker Reinforced Mg Composite Using FEM and Random Sequential Adsorption
• Thermal, Mechanical and Physical Properties of Supercooled Liquid in Pd-Cu-Ni-P Amorphous Alloy
• High T_c Superconductivity of a Melt-Spun Er_1Ba_2Cu_3 Oxide Ribbon
• Development of W-Reinforced Zr-Based Metallic Glass
• Shape Memory Effect and Magnetostriction in Rapidly Solidified Fe-29.6at%Pd Alloy
• Preparation of Highly Active Methanol Steam Reforming Catalysts from Glassy Cu-Zr Alloys with Small Amount of Noble Metals
• Microstructure of Bonding Interface for Resistance Welding of Zr-Based Metallic Glass Sheets
• The Effect of Cerium on Microstructures and Mechanical Properties of Mg-4Al-2Sn-1Ca Alloy
• Alloying Effect on the Hydrogen Sensing Property of Melt-Spun Mg_Pd_ Amorphous Alloy
• Viscous Flow Workability of Ni-Cr-P-B Metallic Glasses Produced by Melt-Spinning in Air
• Effect of Cold Drawing on Electrical and Mechanical Properties of Cu-5 at% Zr Alloy
• Crystallization Kinetics of Ti_Ni_Cu_ Melt-Spun Amorphous Ribbons
• Enganced Shot Peening Effect for Steels by Using Fe-based Glassy Alloy Shots
• Formation, Thermal Stability and Mechanical Properties of Aluminum-Based Glassy Alloys Containing Boron
• Thermal Stability and Mechanical Properties of Ti_Cu_Zr_TM_(TM = Co, Fe) Metallic Glass Sheets Prepared by Twin-Roller Casting Method
• Crystalline Texture and Magnetostriction in Rapid-Solidified Fe-Pd Alloy Ribbons
• Mechanical Properties and Electrical Conductivity of Heavily Cold-Rolled Cu_Zr_x Alloys (x=0-8)
• Thermal stability of Pd-based metallic glasses examined by electrical resistance measurement
• High T_c Superconductor Prepared by Oxidization of a Liquid-Quenched Yb_1Ba_2Cu_3 Alloy Foil in Air
• Formation of a Nanoscale hcp Structure by Crystallization of an Amorphous Co_Zr_7B_2 Alloy
• Nanometer-Scale Structure of Rapidly Solidified Al_V_3Fe_3Zr_2 Alloy
• Formation, Thermal Stability and Mechanical Properties of New Amorphous Al_Fe_Zr_1 Alloy
• Application of a Hydrogen Storage Alloy with an Amorphous Phase for Sensing Hydrogen in Water
• Relations between the Electrical Resistance and Hydrogen Absorption/Desorption for Melt-Spun Mg_Al_3Pd_ and Ni_Nb_Zr_ Amorphous Alloys
• Effect of Hydrogen Absorption on the Electrical Resistance of Melt-Spun Mg-Pd and Mg-Ni-Pd Amorphous Alloys
• Development of Glassy Alloy Separators for a Proton Exchange Membrane Fuel Cell (PEMFC)
• Increase in Thermal Stability of Mg_Ni_Ca_5 Amorphous Alloy by Absorption of Hydrogen
• Composition Control of Pd-Cu-Si Metallic Glassy Alloys for Thin Film Hydrogen Sensor
• Influence of Precipitation Behavior of Different Crystalline Phases for Embrittlement Behavior of Several Zr-Based Metallic Glasses
• Ultrahigh Strength and High Electrical Conductivity Characteristics of Cu-Zr Alloy Wires with Nanoscale Duplex Fibrous Structure
• High-Throughput Screening of Ultraviolet-Visible Magnetooptical Properties of Spinel Ferrite (Zn, Co)Fe_2O_4 Solid Solution Epitaxial Film by a Composition-Spread Approach
• Suppression of Crystallization in Ti-Based Alloys by Fluxing

もっと見る 閉じる

スポンサーリンク