角度アライメントの3成分が測れるオートコリメータ用反射装置
スポンサーリンク
概要
- 論文の詳細を見る
This paper presents a reflection device to measure three components of angular alignment, that is, pitch, yaw and roll with same sensitivity and simultaneity. Pitch and yaw components can be measured by usual arrangement of autocollimator, while roll component by the present device having a reflection mirror hung by thin leaf spring. The principle of the device is clarified by the analysis of the direction cosine. As one of practical problems of the device, the deflection of the spring under rolling is analized. A magnetic damper is used and its effect is checked in order to control a continuous and small vibration of the mirror. The following results are obtained by a few experiments : (1) The three components can be distinguished in the field of view of an autocollimator. (2) The sensitivity and linearity of the device is checked under rolling, changing a few parameters of length and thickness of the spring. The correction and calibration methods are also mentioned and determined. (3) The magnetic damper controls small vibration to be a noise of the reflection mirror and decreases it to 1/20.
- 公益社団法人精密工学会の論文
- 1987-06-05
著者
関連論文
- 新しい表面粗さの表示方式に関する調査研究
- 集積型マイクロ干渉計と走査型電子顕微鏡を用いた微小線幅の精密測定
- 三次元測長型AFMによる形状パラメータの測定と不確かさ
- 原点対称形の一体型三次元微動機構 (第1報)-設計・試作-
- レーザ干渉ねじリード測定機の実用化
- LSI用マスクパターンの線幅測定 : 国内での持回り測定結果について
- 円筒領域モデルによる2次電子エッジ信号の推定
- 超精密計測へのハードル(期待される技術とその課題)( 激変する国際環境と精密工学)
- ホログラフィ干渉で検出されたねじとラックのピッチ信号
- 最近のねじの測定
- 1μm以下における触針式表面粗さ測定機の縦倍率の校正
- レーザ三辺測量における干渉計の配置と測定誤差に関する考察
- 自己キャリブレーションを用いたレーザトラッキングによる三次元座標測定
- 測長用マイケルソン干渉計の光路差変化と4つの数学的機能
- 表面粗さ測定における不確かさ(第1報) : 要因と見積もり
- 2P1-34-042 真直度測定における計測の不確かさ : 撓み問題
- 寸法・幾何計測の研究課題
- 円筒母線の実直度測定における不確かさ(第1報)-要因の理論的考察と見積もり-
- 原点対称形の一体型三次元微動機構(第2報)-特性評価-
- 表面粗さ測定における不確かさの評価 -APMPの国際比較測定-
- 計測における複雑さと精密さ(複雑さと精密さの接点)
- 3次元自由曲面形状の光非接触測定装置(第3報) : 低分解能光学系による対象位置の検出範囲拡大
- 偏光を用いた非接触位置検出プローブ
- 偏光を用いた三角測量法による3次元自由曲面の非接触測定
- 3次元自由曲面形状の光非接触測定装置(第2報) : 光検出器の受光領域の工夫と検出特性の改善
- 追尾式レーザ干渉計による座標計測システム
- 光ファイバと結合した小型レーザ干渉計
- レーザ干渉計を応用した非接触微細形状測定装置
- ホログラフィ干渉で検出されたねじとラックのピッチ信号(続報) : ラックの歯面と実際のピッチ測定
- 3次元自由曲面形状の光非接触測定装置
- 角度アライメントの3成分が測れるオートコリメータ用反射装置
- 角度アライメントの3成分が測れるオ-トコリメ-タ用反射装置
- 表面欠陥の規格化に関するISOの動向(表面欠陥検査の現状と問題点)
- 昭和60年度秋季大会学術講演会に見る「計測, 機素, 機構」関連研究の動向
- レーザ干渉計で測長する場合の誤差要因
- 表面粗さの規格