Sound Field Characteristics in Air Gaps of Noncontact Ultrasonic Motor Driven by Two Flexural Standing Wave Vibration Disks
スポンサーリンク
概要
- 論文の詳細を見る
The sound field characteristics in the air gaps of the noncontact ultrasonic motor driven by two flexural standing wave vibration disks were analyzed by finite element method (FEM). Standing wave sound fields with an opposite phase were generated in the two air gaps by a single driving stator. Traveling wave sound fields in the two air gaps are formed as the superposition of the standing wave sound fields generated by two stators whose temporal phases and spatial positions are different from each other. The traveling direction of the calculated sound fields coincided with the rotating direction of the rotor observed in the experiments. The intensity of the sound field generated in the air gap by the single driving stator was measured by detecting the voltage induced in another stator. A gap distance wider than 0.5 mm is required for a high revolution speed because the sound field generated in the gap on the opposite side of the rotor is weak in an air gap narrower than 0.3 mm.
- 2010-07-25
著者
-
Tamura Hideki
Faculty Of Eng. Yamagata Univ.
-
Yamayoshi Yasuhiro
Faculty Of Engineering Yamagata Universtiy
-
Hirose Seiji
Faculty Of Eng. Yamagata Univ.
-
Shiina Jun
Faculty of Engineering, Yamagata University, Yonezawa, Yamagata 992-8510, Japan
関連論文
- Adsorption Properties of CH_3OH on Al(111) and Fe(100) Surfaces : A Periodic First-Principles Investigation
- Driving Electric Field Effects on Piezoelectric Transducers
- Stability of PbZrO_3-PbTiO_3-Pb(Mn_Sb_)O_3 Piezoelectric Ceramics under Vibration-Level Change
- Basic Investigation on Achieving High Resonance Quality Factor of Piezoelectric Vibrator
- Mechanism of the Reduction of Electron Shading Charge Build-up Using Pulsed Plasma
- High-Frequency Measurements of Plasma Parameters in Electron Cyclotron Resonance Plasma Etchers(Nuclear Science, Plasmas, and Electric Discharges)
- Evaluation of Charge Passed through Gate-Oxide Films Using a Charging Damage Measurement Electrode
- Production of highly uniform electron cyclotron resonance plasmas by distribution control of the microwave electric field
- Slant Slot Antenna-Type Electron Cyclotron Resonance Plasma Source
- Preparation of Multilayers by Alternate Cycles of Chemical Adsorption and Electron Beam Irradiation
- Electric Field Effect in LaTiO_3/SrTiO_3 Heterostructure
- P2-32 Load Characteristics of a Diagonally Symmetric Form Ultrasonic Motor Using a LiNbO_3 Plate(Poster session 2)
- Dielectric Loss in a Piezoelectric Ceramic Transducer under High-Power Operation; Increase of Dielectric Loss and Its Influence on Transducer Efficiency
- Quantum Chemical Calculations of Sulfur Doping Reactions in Diamond CVD
- Molecular Orbital Calculations of Sulfur Doping Reactions in Diamond CVD
- Computational Chemistry Study on Initial Stages of Nitridation of Silicon Surfaces
- Molecular Dynamics Simulations of Adhesional Forces via Hydrocarbon Films
- Nonlinear Susceptibility of Second Harmonic Generation Corresponded to the Diamond(100)Surface Structures
- Ferromagnetism in Semiconductor Dot Array
- Electric Field Effect in LaTiO_3/SrTiO_3 Heterostructure
- Thin Vibrator Alarm Using a Cantilever Piezoelectric Actuator
- Pt/PZT/n-SrTiO_3 Ferroelectric Memory Diode
- Identification of Formation of Conically Converging Shock Waves in an Alumina-Sphere-Dispersed Copper Rod
- Anisotropic Heating of a Copper and Graphite Powder Mixture during an Electrical Column Explosion
- Characterization and Modification of Amorphous Carbon Films Consisting of sp^2 and sp^3 Bonds Using Magneto-Plasma Dynamic Arc-Jet
- P2-36 Basic Study On a Threefold Rotatory Symmetric Form Quartz Vibrator for Triaxial Gyrosensor(Poster session 2)
- Improved Emitter-Base Junction with In_2O_3 in Dielectric-Base Transistor
- Growth of Epitaxial CeO_2 Films on (1012) Sapphire by Halide Source Plasma Enhanced Chemical Vapor Deposition
- A Method of Measuring the Vibration Level Dependence of Impedance-Type Equivalent Circuit Constants : Ultrasonic Transduction
- An Analysis on the Driving Force and Optimum Frequency of a Noncontact-Type Ultrasonic Motor
- Vibration-Level Characteristics of Lead-Zirconate-Titanate Ceramics
- Excitation of Coupled Length-Expansion-Mode in a Piezoelectric Rectagular Plate by Using Interdigital Electrodes : V: PIZOELECTRIC VIBRATOR
- Piezoelectric Ceramic Transformer Using Piezoelectric Lateral Effect on Input and on Output
- New Method for Measuring Mechanical Vibration Loss and Dielectric Loss of Piezoelectric Transducer under High-Power Excitation
- Magnetic Field Dependence of Critical Current Density in Superconducting Y-Ba-Cu-O and Bi-Sr-Ca-Cu-O Films (Special Issue on High-Temperature Superconducting Electronics)
- Spectroscopic Evaluation on Photosensitive Langmuir Films Using Multichannel Spectrophotometer : Techniques, Instrumentations and Measurement
- Boron and Phosphorus Jon Emissions from a Cu-P-Pt-B Liquid Metal Ion Source
- Mass and Energy Analyses of Gallium-Indium Liquid-Metal-Ion Sources
- Development of Phosphorus Liquid-Metal-Ion Source
- Optical Buffer Memory Using Polarization-Bistable Vertical-Cavity Surface-Emitting Lasers
- Polarization Bistable Characteristics of Mesa Structure 980 nm Vertical-Cavity Surface-Emitting Lasers
- Multilayered Piezoelectric Transformers for Small Power Supplies
- Sound Field Characteristics in Air Gaps of Noncontact Ultrasonic Motor Driven by Two Flexural Standing Wave Vibration Disks
- Noncontact Ultrasonic Motor with Two Flexural Standing Wave Vibration Disks
- Vibration-Level Characteristics for Iron-Doped Lead-Zirconate-Titanate Ceramic
- Optimum Design for Noncontact Ultrasonic Motor with Flexurally Vibrating Disk Using an Equivalent Circuit Considering Viscosity of Air
- Precise Measurement of Losses in Piezoelectric Transducer and Its Application to Evaluation of Piezoelectric Transformer Efficiency