Development of a Novel Tablet Machine for a Tiny Amount of Powder and Evaluation of Capping Tendency
スポンサーリンク
概要
- 論文の詳細を見る
A novel single punch tablet machine was developed for a tiny amount of powder sample. This tablet machine mainly consists of upper and lower punches, single die, and conical powder feeder equipped with micro-vibrators. By using the powder feeder, mass of discharged powder can be maintained constant even if a tiny amount of powder having poor flowability is used. Motions of both upper and lower punches can be set arbitrarily. Thus, this machine enables us to prepare tablets with a tiny amount of powder sample under the same compression mechanism as conventional rotary tablet machines. Performance of the developed tablet machine was evaluated in a continuous direct tableting using a model powder with poor flowability. Thirty-four tablets (195 mg×34) having acceptable properties can be successfully prepared using no more than 10.0 g of a powder sample. We then proposed a novel in-die evaluation method of capping tendency. A new phase diagram consisting of the elastic recovery energy and the plastic deformation energy was proposed. These energies were calculated from a force-displacement profile, continuously monitored by the developed tablet machine. The results indicate that by using the new diagram the capping tendency of tablets prepared from various model powders can be well discriminated. The developed tablet machine and proposed evaluation method can contribute to a significant cost reduction and speeding up of formulation studies of oral dosage form.
著者
-
Watano Satoru
Department Of Chemical Engineering Graduate School Of Engineering Osaka Prefecture University
-
Iwasaki Tomohiro
Department Of Chemical Engineering Graduate School Of Engineering Osaka Prefecture University
-
Nakamura Hideya
Department Of Chemical Engineering Osaka Prefecture University
-
Sugino Yui
Department of Chemical Engineering, Osaka Prefecture University
-
IWASAKI Tomohiro
Department of Chemical Engineering, Osaka Prefecture University
関連論文
- Improvement of Dissolution Property of Poorly Water-Soluble Drug by Supercritical Freeze Granulation
- Improvement of Dissolution Property of Poorly Water-Soluble Drug by Novel Dry Coating Method Using Planetary Ball Mill
- Analysis of Compressing and Shearing Behavior of Powders in High-Speed Elliptical-Rotor-Type Powder Mixer (HEM)
- Application of the core-shell-type granulation process for the preparation of compression molding granules containing fibrous material and powders
- Removal of Fine Powders from Film Surface. I. Effect of Electrostatic Force on the Removal Efficiency
- Optimization and validation of an image processing system in fluidized bed granulation
- IR absorption characteristics of an IR moisture sensor and mechanism of water transfer in fluidized bed granulation
- Control Granule Growth in Fluidized Bed Granulation by an Image Processing System
- Measurement of Moisture Content by IR Sensor in Fluidized Bed Granulation. Effects of Operating Variables on the Relationship between Granule Moisture Content and Absorbance of IR Spectra
- Control of moisture content by adaptive fuzzy control in agitation fluidized bed granulation
- APPLICATION OF FUZZY LOGIC TO MOISTURE CONTROL IN FLUIDIZED BED GRANULATION
- Heat Transfer and the Mechanism of Drying in Agitation Fluidized Bed
- Development of a Novel Compression Tester and Rheo-Mechanical Properties of Wet-Mass Powder.II : Effect of Moisture Content on the Rheo-Mechanical Properties
- Development of a Novel Compression Tester and Rheo-Mechanical Properties of Wet-Mass Powder.I : Effect of Kneading Time on the Rheo-Mechanical Properties
- Novel mechanochemical process for synthesis of magnetite nanoparticles using coprecipitation method
- Granulation of Core Particles Suitable for Film Coating by Agitation Fluidized Bed III : Effect of Scale, Agitator Rotational Speed and Blade Shape on Granule Properties and Development of a High Accuracy Scale-Up Theory
- Granulation of Core Particles Suitable for Film Coating by Agitation Fluidized Bed II. : A Proposal of a Rapid Dissolution Test for Evaluation of Bitter Taste of Ibuprofen
- Granulation of Core Particles Suitable for Film Coating by Agitation Fluidized Bed I. Optimum Formulation for Core Particles and Development of a Novel Friability Test Method
- Numerical analysis of similarities of particle behavior in high shear mixer granulators with different vessel sizes
- Surface Modification of Food Fiber by Dry Particle Coating
- Numerical Simulation of Film Coating Process in a Novel Rotating Fluidized Bed
- Scale-Up of Agitation Fluidized Bed Granulation by Neural Network
- Scale-Up of Agitation Fluidized Bed Granulation. V. Effect of Moisture Content on Scale-Up Characteristics
- Rheological properties of particle-flux suspension paste
- Quantitative evaluation of kneading and extrusion processes by pressure transmission characteristics of wet kneaded masses
- Modeling of Agitation Fluidized Bed Granulation by Random Coalescence Model
- Heat Transfer and Granule Growth Rate in Fluidized Bed Granulation
- Mathematical Model in the Kinetics of Agitation Fluidized Bed Granulation. Effects of MOisture Content, Damping Speed and Operation Time on Granule Growth Rate
- COMPUTER SIMULATION OF AGITATION FLUIDIZED BED GRANULATION BY A TWO-DIMENSIONAL RANDOM ADDITION MODEL
- COMPUTER SIMULATION OF FLUIDIZED BED GRANULATION BY A TWO-DIMENSIONAL RANDOM COALESCENCE MODEL
- Drying of Granules in Agitation Fluidized Bed
- Development of a novel particle size control system for hammer milling
- Determination of Optimal Formulation for Extrusion Granulation by Compression Test of Wet Kneaded Mass
- Quantitative Analysis of Water Dispersion Conditions and Pressure Transmission Characteristics of a Wet Kneaded Mass
- A method for process monitoring and determination of operational end-point by frequency analysis of power consumption in agitation granulation
- Removal of Fine Powders from Film Surface. II. Effect of Operating Parameters on the Removal Efficiency
- Scale-up methodology for tumbling ball mill based on impact energy of grinding balls using discrete element analysis
- Continuous Monitoring and Mechanism of Electrostatic Charge of Powder in Fluidized Bed Process
- Effect of Spray Mist Size on the Properties of Granules Prepared by Agitation Fluidized Bed Coating
- Preparation of Core Particles for Aqueous Film Coating Using Agitation Fluidized Bed
- Characterization of powder mixers based on mechanical energy using soft dye granules
- Evaluation of the mixing process based on a disintegrating rate model of the powder agglomerates
- Prediction of Granule Physical Property by a Novel Compression Energy of Wet Powder
- Development of a Novel Granular Detergent by Inorganic Solution Binder
- Development of a Novel Granular Detergent with an Interspersion Particle Comprising an Anionic Surfactant and a Polymeric Polycarboxalate
- Development of a High Active Surfactant and High Soluble Granular Detergent by Secondary Alkyl Sulfate
- Monitoring and Scale-Up of Static Electrification during Solid-Liquid Mixing
- Rheological Analysis and Quantitative Evaluation of Wet Kneaded Wax Matrix
- Measurement of Physical Strength of Pharmaceutical Extruded Pellets
- Development of a Novel Tablet Machine for a Tiny Amount of Powder and Evaluation of Capping Tendency
- In-Die Evaluation of Capping Tendency of Pharmaceutical Tablets Using Force-Displacement Curve and Stress Relaxation Parameter
- My impression of APT2000
- A Case of Lemierre's Syndrome in Association with Liver Abscess without Any Other Metastatic Lesions
- Control of moisture content in fluidized bed granulation by neural network.