マイクロショックチューブ内の間欠高速流れの流速測定

概要

論文の詳細を見る
Velocity measurement of an intermittent high-speed flow inside a micro wave rotor cell was carried out by utilizing a laser Doppler anemometry (LDA). The cell is 3×3mm rectangular tube, whose length is 42mm. The pressure ratio and rotor speed of the wave rotor were set at 2.5 and 5000rpm, respectively. Ethanol droplets were seeded into the flow as scattering particles. By use of laser beam expanders, the beam intersection volume of the LDA optics was minimized, and submillimeter spatial resolution is realized while a wide velocity range (-100 to 300m/s) is kept. It is shown that the velocity histories at local positions inside the wave rotor cell can be obtained with the LDA optics. The rapid velocity increase and decrease, due to the primary and secondary shock waves, are observed, and the propagation speed of the primary shock wave was estimated. It is shown that the spatial distribution of the maximum velocity inside the cell is constant, and that the boundary layer thickness inside the cell is smaller than 0.5mm. It is shown that the effect of viscosity is relatively small in such a micro wave rotor.
社団法人日本機械学会の論文
2006-01-25