Charge Trapping Sites in Spherulitic Polypropylene
スポンサーリンク
概要
- 論文の詳細を見る
Charged areas of spherulitic polypropylene (PP) samples were visualized by a simple technique of attaching oppositely charged fine dye particles. A combination of this visualization technique and thermally stimulated current (TSC) spectroscopy was applied to identify the regions where shallow and deep charge traps exist densely in positively corona-charged spherulitic PP. The shallow and deep traps in the PP sample are directly related to its two TSC bands, B_L and B_H, appearing at temperatures around 60℃ and above 100℃, respectively. From visualized charge patterns of the PP samples with and without thermal cleaning of the B_L band, it was found that the shallow traps mainly exist in the boundaries and the peripheral regions of spherulites while the deep traps are located in the central parts. Furthermore, the relative numbers of the shallow and the deep traps in the PP spherulites were estimated and found to depend on spherulite size : the ratio of shallow to deep traps decreased from 60/40 for 130-190μm spherulites to 43/57 for 320-400μm spherulites.
- 社団法人応用物理学会の論文
- 1999-04-15
著者
-
Yagishita A
Process And Manufacturing Engineering Center Semiconductor Company Toshiba Corporation
-
Ikezaki Kazuo
Department Of Applied Physics And Physico-informatics Faculty Of Science And Technology Keio Univers
-
Yamanouchi Hiroko
Department of Geriatric Dentistry, Osaka Dental University
-
YAGISHITA Akihiko
Department of Applied Physics and Physico-Informatics, Faculty of Science and Technology, Keio Unive
-
Yamanouchi Hiroko
Department Of Applied Physics And Physico-informatics Faculty Of Science And Technology Keio Univers
関連論文
- Sub-1.3 nm Amorphous Tantalum Pentoxide Gate Dielectrics for Damascene Metal Gate Transistors
- Sub 1.3nm Amorphous Ta_2O_5 Gate Dielectrics for Damascene Metal Gate Transistor
- Highly Uniform Low-Pressure Chemical Vapor Deposition (LP-CVD) of Si_3N_4 Film on Tungsten for Advanced Low-Resistivity "Polymetal" Gate Interconnects
- Plasma-Damage-Free Gate Process Using Chemical Mechanical Polishing for 0.1 μm MOSFETs
- Plasma Damage Free Gate Process Using CMP for 0.1um MOSFETs
- Effects of Cleavage on Local Cross-Sectional Stress Distribution in Trench Isolation Structure
- Effects of Cleavage on Local Cross-Sectional Stress Distribution in Trench Isolation Structure
- Effect of Crystallinity on Electrical Conduction in Polypropylene
- Low Leakage TiO_2 Gate Insulator Formed by Ultrathin TiN Deposition and Low-Temperature Oxidation
- Reliable High-k TiO_2 Gate Insulator Formed by Ultrathin TiN Deposition and Low Temperature Oxidation
- Novel Elevated Source/Drain Technology for FinFET Overcoming Agglomeration and Facet Problems Utilizing Solid Phase Epitaxy
- Highly Uniform Deposition of LP-CVD 3i3N4 Films on Tungsten for Advanced Low Resistivity "Poly-Metal" Gate Interconnects
- Case of an implant-supported overdenture to improve eating and swallowing
- Charge Trapping Sites in Spherulitic Polypropylene
- Effect of Etching Treatment on Thermally Stimulated Current in Spherulitic Polypropylene
- Extrinsic Thermally Stimulated Currents in FEP Films with Ion-Plated Aluminum Electrodes : Chemistry (incl. physical process)
- Fluorescence Degradation of Polyvinyltoluene
- Electrical Charging Characteristics of Spherulitic Polypropylene
- Thermally Stimulated Currents from Ion-Injected Teflon-FEP Film Electrets
- Protection against Fluorescence Degradation of Polyvinyltoluene Excimer by uv Light
- Fluorescence Properties of Anthracene-Polyvinyltoluene System. Effects of the Copolymerization of Anthracene