スポンサーリンク
Department of Electrical Engineering, Da-Yeh University | 論文
- Improvement in GaN-based light-emitting diodes by surface texturization with natural lithography
- Ion-Implantation Treatment(Ba, Sr)TiO_3 Thin Films
- Transparent barrier coatings for flexible organic light-emitting diode applications
- Effects of Transparent Conductive Layers on Characteristics of InGaN-Based Green Resonant-Cavity Light-Emitting Diodes
- Nitride-Based UV Metal-Insulator-Semiconductor Photodetector with Liquid-Phase-Deposition Oxide
- Fabrication of Si thin-film solar cells by hot-wire chemical vapor deposition and laser doping techniques
- Enhancing P-type Conductivity in Mg-doped GaN Using Oxygen and Nitrogen Plasma Activation
- Wafer-Bonded 859-nm Vertical-Cavity Surface-Emitting Lasers on Si Substrate with Metal Mirror
- High-Brightness Wafer-Bonded ITO/AlGaInP/Mirror/Si Light Emitting Diodes
- A New Non-uniform Meandered and Fork-Type Grounded Antenna(NMFGA) for Triple-Band Operations(Antennas and Propagation)
- Near-Ultraviolet InGaN/GaN Light-Emitting Diodes Grown on Patterned Sapphire Substrates
- Characterization of Large-Area AlGaInP/Mirror/Si Light-Emitting Diodes Fabricated by Wafer Bonding
- Thinning Technology for Lithium Niobate Wafer by Surface Activated Bonding and Chemical Mechanical Polishing
- Effects of Transparent Conductive Layers on Characteristics of InGaN-Based Green Resonant-Cavity Light-Emitting Diodes
- Nitride-Based UV Metal–Insulator–Semiconductor Photodetector with Liquid-Phase-Deposition Oxide
- High-Power AlGaInP Light-Emitting Diodes with Patterned Copper Substrates by Electroplating
- Improvement in Extraction Efficiency of GaN-Based Light-Emitting Diodes with Textured Surface Layer by Natural Lithography
- Surface Texturing for Wafer-Bonded Vertical-Type GaN/Mirror/Si Light-Emitting Diodes
- Fabrications of Si Thin-Film Solar Cells by Hot-Wire Chemical Vapor Deposition and Laser Doping Techniques
- Improvements of N-Side-up GaN Light-Emitting Diodes Performance by Indium–Tin-Oxide/Al Mirror