Influence of Void and Flow Regime on Liquid Metal MHD Induction Generator Using Two-Phase Flow
スポンサーリンク
概要
- 論文の詳細を見る
In the present paper, the performance characteristics of a liquid metal MHD inductionconverter operated with two-phase mixture flow are treated experimentally and analytically in comparison with those with single-phase liquid flow as working fluid. <BR>The experiments were performed with a flat-linear channel induction converter, through which NaK-N2 two-phase mixture was made to flow at a velocity ranging 530m/sec, with a void fraction 050%. <BR>Data were taken over the following range of non-dimensional parameters:<BR>Reynolds number : 3.3×10<SUP>4</SUP>2.0×10<SUP>5</SUP> (for liquid flow alone) <BR>Hartmann number : 12 (with magnetic field in r.m.s. and slip <I>S</I>=1) <BR>Baroczy's property index : 0.00310.023 (for two-phase flow)<BR>The electrical power output of the experimental generator showed a sudden decrease near 20% void fraction, which was attributed to change in the flow pattern, while the generator efficiency did not show such an abrupt drop, but decreased gradually with increase of the void fraction. <BR>Coupling the electro-magnetic equations with the power law distribution for both fluid velocity and void fraction proposed by Bankoff, we have obtained numerically the performance characteristics of the liquid metal MHD induction converter operated with two-phase flow, which provided a quite satisfactory clarification of the results obtained experimentally.
- 一般社団法人 日本原子力学会の論文
著者
-
Suita Tokuo
Department Of Atomic Energy Engineering Faculty Of Engineering Osaka University
-
INOUE Shoji
Department of Electric, Information and Energy Engineering, Graduate school of Engineering, Osaka Un
-
SUITA Tokuo
Department of Nuclear Engineering, Osaka University
-
FUJII-E Yoichi
Department of Nuclear Engineering, Faculty of Engineering, Osaka University
-
TANATSUGU Nobuhiro
Department of Nuclear Engineering, Osaka University
関連論文
- Defects in Cadmium Selenide Single Crystals
- NMR Study of γ Ray Induced Polymerisation of Ethyl Acrylate
- Coherent Interactions of a Modulated Electron Beam with a Plasma (HXR-4)
- E.S.R. of Irradiated DPPH Protected by Polystyrene
- Threshold Energy of Atomic Displacement in CdTe
- Thermal Bleaching of F-Centers of Gamma-Irradiated KCl at Low Temperatures
- A High Current and Good Emittance Ion Source
- Flowing Mercury Afterglow Excited by D. C. Discharge
- Depopulation of Excited Mercury Atoms by Collisions with Hydrogen Molecules in the Flowing Mercury Afterglow
- Coherent Domains in Some Parameter Spaces Inherent in a Beam-Plasma Regime
- Non-Linear Phenomena in Beam-Plasma Interaction
- An Observation on a Non-Linear Effect in Beam-plasma Interaction
- Radiation Hardening of Potassium Bromide Crystals at 196°K
- Energy Loss of Low Energy Protons and Deuterons in Evaporated Metallic Films
- Scattering of Low Energy Hydrogen Ions H_, H_ and H_) and Atoms (H_) from Evaporated Metallic Films
- Stopping Cross-Sections of Metallic Films for Projectile of Low Energy Proton
- Secondary Electron Emission Type Neutral Particle Detector
- Stabilization of Flute Instability by High Frequency Field
- Stabilization of Flute Instability by Means of High Frequency Field
- Microinstability of Mirror Confined Energetic Plasma in an R.F. Electric Field
- Thermoluminescence of Gamma-Irradiated KCl
- A Study of a Manganese Paramagnetic Center in Irradiated NaCl:Mn^ Crystals
- Distribution Coefficients of Various Impurities in Alkali Halides
- Excitation of Ion Cyclotron Harmonic Waves in a Plasma by a Perpendicularly Injected Electron Beam
- Excitation and Stabilization of Microinstabilities by R.F. Electric Field
- Effects of an R.F. Electric Field on Microinstability
- Intensity Relaxation of Certain Hg Lines in Preionized Mercury Vapor Flow
- Forced Convection Heat Transfer and Temperature Fluctuations of Lithium under Transverse Magnetic Fields
- Space Charge Phenomena in Nitrobenzene under High Electric Field
- Electrostatic Transformer Type Particle Accelerator using Ceramic BaTiO_3 : Ferrostac
- Excitation of Longitudinal Waves near Ion Cyclotron Harmonics
- Photoconduction and Darkening of AgCl Crystals at Low Temperatures
- Optical Bleaching of Gamma-Irradiated KCl at Room Temperature
- Dielectric Breakdown and Pulse Conduction of Silver Halide Crystals
- Suppression of Precessional Drift Wave by External Inhomogeneous High Frequency Field
- Injection-Trapping of High Energy Molecular Ions into the Mirror Field with the RF Electric Field (II)
- Decrease in Intensity of Hg Lines near the Source in Weakly Ionized Mercury Gas Flow
- Annealing of Quenched-in Defects in Ge Crystal : Dislocation density 10^4-10^5 etch-pits/cm^2
- Effects of Dislocation Density on the Precipitation Rate of Cu in Ge
- Thinning Improves Surface-Soil Physical Properties of Coniferous Forest Plantations
- Temperature Dependence of Flow Stress in Gamma Ray Irradiated Sodium Chloride Crystals
- Response Time of Ion Beams in a PIG Ion Source
- Beam Controllable PIG Ion Source
- Photoconduction of Silver Chloride Crystals
- Neutron Irradiation Effects on Superconducting Nb-Ti Wires for Fusion Reactor
- Existence of Static Pinning of Dislocations in Gamma-Rayed NaCl
- Effect of Re-crystallization on the Temperature Dependence of Photocurrent of Silver Chloride Crystals
- Bleaching of F-Centers and Formation of Complex Centers in Gamma-Irradiated KCl at Room Temperature
- Radiation Damage in Naphthalene Single Crystals
- Heat transfer and temperature fluctuation of lithium flowing under transverse magnetic field.
- Influence of Precipitates to Superconducting Properties of Nb-Ti Alloy in Connection with Hardness
- The Second Spatial Moment of Neutron Distribution in Hydrogenous Moderators Containing Voids
- Film boiling characteristics of potassium droplets on heated plate.
- Utilizing RF Electric Field for Injection-Trapping High Energy Molecular Ions in Mirror Field, (I)
- Intense and small emittance hydrogen ion beam formation by BPD ion source.
- Direct Measurement of Neutron Flux
- Pressure wave propagation in an imploding liquid metal liner.
- Dryout heat flux for core debris bed. (I) Effects of system pressure and particle size.:Effects of System Pressure and Particle Size
- Pressure Transient and Bubble Growth in Incipient Boiling of Superheated Potassium
- Experimental Studies on Characteristics of Pressure Attenuation and Recovery to Saturation for Decompressive Disturbances in Low Pressurized Water
- Influence of Void and Velocity Variations on Two-Phase Liquid Metal MHD Induction Converter Characteristics
- Influence of Void and Flow Regime on Liquid Metal MHD Induction Generator Using Two-Phase Flow
- Incipient boiling of sodium in an annular channel heated by a single-pin with blockage.
- Dynamic stabilization of imploding liquid metal liner.
- Effect of Plastic Deformation on the Dielectric Breakdown of Silver Chloride Crystals
- Dryout heat flux for core debris bed. (II) Effects of particle size mixing and coolant flow.:Effects of Particle Size Mixing and Coolant Flow
- Liquid metal liner implosion systems with blade lattice for fusion.
- The Effect of Cylindrical Holes in a Moderator on the Passage of Virgin Neutrons from a Point Source
- Preliminary Calculation for Experiments Using Osaka University HITS, (I):Time-Dependent Thermal Neutron Angular Flux from a Pulsed Exponential Assembly Calculated in P3-Approximation of the Transport Equation
- Intensity and Propagation Velocity of Compression Shock Pulses in Low Pressure Steam-Water Medium
- Effect of Fast Neutron Irradiation on Critical Current Density of Nb-Ti Alloy for Fusion Reactor
- Analysis of Two-Phase Liquid Metal MHD Induction Converter
- Redistribution of gaseous phase of liquid metal two-phase flow in a strong magnetic field.