P-33 Biomedical porous titanium alloys prepared by mechanical alloying and powder sintering
スポンサーリンク
概要
- 論文の詳細を見る
In the present study, porous scaffolds fabricated from three kinds of mechanically alloyed Ti-7.5Mo powders were successfully prepared through a space-holder sintering method, and the compressive strengths and moduli of all the sintered porous Ti-7.5Mo conform to the basic mechanical property requirement of cancellous bones. However, the porous Ti-7.5Mo fabricated from particles ball milled for 15 hrs (TM15) possesses a relatively higher strength. Moreover, the elastic modulus of TM15 is 1.72 GPa, which is comparable to that reported for cancellous bone.
- 2012-09-25
著者
-
Kikuchi Hisaji
Department Of Dental Materials Nihon University School Of Dentistry:division Of Biomaterials Science
-
Kikuchi Hisaji
Department Of Dental Materials Nihon University School Of Dentistry
-
Ho Wen-fu
Department Of Materials Science And Engineering Da-yeh University
-
Wu Shih-ching
Department Of Dental Technology And Materials Science Central Taiwan University Of Science And Techn
-
Hsu Hsueh-chuan
Department Of Dental Technology And Materials Science Central Taiwan University Of Science And Techn
-
Kikuchi Hisaji
Nihon Univ. School Of Dentistry Tokyo Jpn
-
Ho Wen-fu
Da-yeh Univ.
-
Wu Shih-ching
Central Taiwan Univ. Of Sci. And Tech.
-
Tsai Ming-shiun
Da-yeh Univ.
-
Hsu Hsueh-Chuan
Central Taiwan Univ. of Sci. and Tech.
-
Hsu Shih-Kuang
Central Taiwan Univ. of Sci. and Tech.
-
Kurotani Tomoko
Nihon Univ.
-
KIKUCHI Hisaji
Nihon Univ.
関連論文
- Surface characterization and bond strengths between Ti-20Cr-1X alloys and low-fusing porcelain
- The Thickness Effects of Titanium Castings on the Surface Reaction Layer
- Effect of laser irradiation conditions on the laser welding strength of cobalt-chromium and gold alloys
- Surface characterization and bond strengths between Ti-20Cr-1X alloys and low fusing porcelain
- P-33 Biomedical porous titanium alloys prepared by mechanical alloying and powder sintering
- P-59 Effects of surface treatments on phase transformation of dental zirconia
- P-29 Formation of calcium phosphates on biomedical porous titanium alloys prepared by mechanical alloying and powder sintering
- P-12 Characterization of surface modified zirconia by hydrothermal method
- P-55 Preparation and characteristics of bone-like apatite nanopowder
- P-15 Porous pure titanium prepared by sponge replication method for biomedical applications
- P-14 Chemical treatment and bioactivity of nanotubular anodized Ti alloy
- P-54 Phase transformation of dental porcelain fused to zirconia
- P-31 Evaluation of corrosion behavior and biocompatibility of biomedical Ti-25Nb-xSn alloys
- Dimensional changes in stone casts resulting from long-term immersion of addition-type silicone rubber impressions in disinfectant solutions
- Effects of surface treatments on phase transformation of dental zirconia
- Biomedical porous titanium alloys prepared by mechanical alloying and powder sintering
- P-50 Microstructure and mechanical properties of Ti-Mo-Cr alloys
- P-51 Bond strengths between Ti-25Nb-xSn alloys and low-fusing porcelain
- P-43 Corrosion behavior and biocompatibility of Ti-10Zr-xMo alloys for biomedical application
- Phase transformation of dental porcelain fused to zirconia
- P-42 Characteristics and microstructure of porous Ti-5Nb-5Mo alloy for biomedical applications
- Evaluation of corrosion behavior and biocompatibility of biomedical Ti-25Nb-xSn alloys
- Formation of calcium phosphates on biomedical porous titanium alloys prepared by mechanical alloying and powder sintering
- P-10 Evaluation of porous Y-TZP scaffold coated with bioglass
- Preparation and characteristics of bone-like apatite nanopowder
- Characterization of surface modified zirconia by hydrothermal method
- Chemical treatment and bioactivity of nanotubular anodized Ti alloy
- Porous pure titanium prepared by sponge replication method for biomedical applications