高分子量マクロゴール中におけるアスピリン結晶の成長と分解
スポンサーリンク
概要
- 論文の詳細を見る
The state of aspirin mixed in the solid Macrogol was examined. Macrogol-6000 and 30% (w/w) aspirin were mixed at 70°, 90°, and 110°, and aged at the same temperature. After the mixture cooled, various tests were carried. As the aging time became longer and the temperature higher, the sample became more transparent and had less consistency by both transparency test and thermal analysis. When a high temperature was used or long time spent for aging, X-ray diffraction patterns and infrared (IR) spectra indicated that aspirin in the mixture was in a liquid state at room temperature. The presence of acetylated Macrogol in the mixture was estimated from nuclear magnetic resonance (NMR) and IR spectra, and by a stoichiometric method, and the presence of salicylic acid was confirmed from ultraviolet ( UV) spectra. It is concluded that transesterification between aspirin and Macrogol 6000 decomposed part of aspirin to salicylic acid, and formation of acetylated Macrogol from Macrogol. Lowering of consistency and increased transparency of the mixture may be due to one of the following three reasons : (1) Dissolution of aspirin into Macrogol, of lower molecular weight formed by lowering of molecular weight of Macrogol 6000 due to heating in the presence of aspirin, (2) complicated lowering of the melting point by four ingredients (aspirin, Macrogol, salicylic acid, and acetylated Macrogol), and (3) delay of crystal growth of aspirin in the mixture.
- 1976-03-25
著者
-
福岡 英平
東邦大学薬学部
-
福岡 英平
School of Pharmaceutical Sciences, Toho University
-
福岡 英平
School Of Pharmaceutical Sciences Toho University
-
木村 真太郎
東邦大学薬学部
-
木村 真太郎
(present Address)pharmacy Of Hospital Attached To The Faculty Of Dentistry Tokyo Medical And Dental
関連論文
- Physicochemical Properties of Crystalline Lactose. II. Effect of Crystallinity on Mechanical and Structural Properties
- Physicochemical Properties of Crystalline Lactose. I. Estimation of the Degree of Crystallinity and the Disorder Parameter by an X-Ray Diffraction Method
- Effect of Grinding on Physical and Chemical Properties of Crystalline Medicinals with Microcrystalline Cellulose. II. : Retention of Volatile Medicinals in Ground Mixture
- Effects of Grinding on Physical and Chemical Properties of Crystalline Medicinals with Microcrystalline Cellulose. I. Some Physical Properties of Crystalline Medicinals in Ground Mixtures
- 錠剤の崩壊に対する崩壊剤の膨潤効果
- Crystallinity and Physical Characteristics of Microcrystalline Cellulose. II. Fine Structure of Ground Microcrystalline Cellulose
- Crystallinity and Physical Characteristics of Microcrystalline Cellulose
- Use of Microcalorimetry in the Field of Pharmaceutical Sciences. I. Measurement of Drug Dissolution from Solid Dosage Forms
- Solid-State Reaction between Sulfacetamide and Phthalic Anhydride by Grinding
- Paracrystalline Lattice Distortion in Crystalline Pharmaceuticals Determination of Paracrystalline Lattice Distortion by Powder X-Ray Diffraction
- Pattern Fitting Procedure for the Characterization of Crystals and/or Crystallities in Tablets
- Preferred Orientation of Crystallites in Tablets. V. Pattern-Fitting Procedure for the Determination of Strength of Preferred Orientation of Crystallites
- Preferred Orientation of Crystallites in Tablets. IV. Features of the Preferred Orientation Plane
- Preferred Orientation of Crystallites in Tblets. III. Variations of Crystallinity and Crystallite Size of Pharmaceuticals with Compression
- Preferred Orientation of Crystallites in Tablets. II. Evaluation of Preferred Orientation of Crystallites by X-Ray Powder Diffractometry
- Glassy State of Pharmaceuticals. V. Relaxation during Cooling and Heating of Glass by Differential Scanning Calorimetry
- Glassy State of Pharmaceuticals. IV. : Studies on Glassy Pharmaceuticals by Thermomechanical Analysis
- Glassy State of Pharmaceuticals. III. : Thermal Properties and Stability of Glassy Pharmaceuticals and Their Binary Glass Systems
- Glassy State of Pharmaceuticals. II. Bioinequivalence of Glassy and Crystalline Indamethacin(Pharmaceutical)
- 錠剤内の粒子配列について(第3報)圧縮過程でのアスピリン結晶粒子の配列の変化
- 錠剤内の粒子配列について(第2報)アスピリン結晶形状の粒子配列および成形性におよぼす影響
- 錠剤内の粒子配列について(第1報)配列状態の測定法
- 高分子量マクロゴール中におけるアスピリン結晶の成長と分解
- The Rate of Penetration of Liquid into Tablets. II. Influence of Second Ingredient and Mixing Ratio
- Cohesion of Particulate Solids. VI. Improvement of Apparatus and Application to Measurement of Cohesiveness at Various Levels of Humidity
- The Rate of Penetration of Liquid into Tablets
- Cohesion of Particulate Solids. VIII. Influence of Particle Shape on Compression by Tapping
- Cohesion of Particulate Solids. VII. Influence of Particle Size on Compression by Tapping
- 粉粒体の凝集性(第5報)タッピングによる圧縮応力と粉末薬品の圧縮性
- 粉粒体の凝集性(第4報)流動性と凝集性
- 粉粒体の凝集性(第3報)粒子形態の影響
- 粉粒体の凝集性(第2報)粒径の影響
- 粉粒体の凝集性(第1報) : 凝集力の測定方法(薬剤学)