An Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with a Cylindrical Hole
スポンサーリンク
概要
- 論文の詳細を見る
A solution is presented to a doubly mixed boundary-value problem of an elastic layer on a rigid base weakened by a cylindrical hole coaxial with a circular punch. The punch problem is reduced to the infinite system of simultaneous equations in which both the normal displacement on the lower face of the layer and the contact stress under the punch are expressed as appropriate series. Numerical results are obtained for the distribution of contact stress under the punch, the normal displacement on both surfaces of the layer and the total load applied to the punch. The effect of the presence of the hole on the stress field is also discussed.
- 一般社団法人日本機械学会の論文
- 1990-10-15
著者
-
Koizumi Takashi
Faculty of Engineering, Tokyo Institute of Technology
-
Koizumi Takashi
Faculty Of Engineering Tokyo Institute Of Technology
-
Koizumi T
Chuo Univ. Tokyo Jpn
-
HARA TOSHIAKI
Faculty of Engineering, Niigata University
-
SHIBUYA Toshikazu
Faculty of Engineering, Tokyo Institute of Technology
-
Hara T
Faculty Of Agriculture Niigata University
-
Hara Toshiaki
Faculty Of Engineering Niigata University
-
Shibuya T
Department Of Mechanical And Intelligent Systems Engineering Tokyo Institute Of Technology
-
Shibuya T
National Inst. Multimedia Education Chiba Jpn
-
Shibuya Toshikazu
Faculty Of Engineering Tokyo Institute Of Technology
-
AKIYAMA Takao
Faculty of Engineering, Niigata University
-
Akiyama Takao
Faculty Of Engineering Niigata University
-
Koizuml Takashi
Faculty Of Engineering Tokyo Institute Of Technology
関連論文
- Identification of Control Parameters for Brass Player's Embouchure by Measuring Contact Pressure on the Teeth Buccal Surface
- Elastic-Plastic Finite Element Analysis on Bonding Edge of Dissimilar Materials
- Pressure distribution in the humeroradial joint and force transmission to the capitellum during rotation of the forearm : effects of the Sauve-Kapandji procedure and incision of the interosseous membrane
- On Generalized Hamming Weights of Codes Constructed on Affine Algebraic Varieties (Special Section on Information Theory and Its Applications)
- On the Comparison of Lower Bounds for Generalized Hamming Weights
- Simple Estimation for the Dimension of Subfield Subcodes of AG Codes
- An Improved Bound for the Dimension of Subfield Subcodes
- Indentation by a Circular Rigid Punch of a Transversely Isotropic Layer on a Rigid Foundation
- An Axisymmetric Contact Problem of an Elastic Half-Space Pressed onto a Rigid Foundation with a Spherical-Ended Protrusion
- Indentation of a Penny-Shaped Crack by a Disc-Shaped Rigid Inclusion in an Elastic Layer
- An Axisymmetric Contact Problem of a Transversely Isotropic Layer Indented by an Annular Rigid Punch
- Torsion of an Elastic Layer on a Rigid Foundation with an Annular Hole
- Contact Pressure Measurement by Means of Ultrasonic Waves Using Angle Probes
- Torsion of Compound Cylinder with an External Annular Crack
- Torsion of a Two-part Cylindrical Rod
- The Axisymmetric Stress Field in an Infinite Solid Cylinder with an External Crack under Torsion
- Experimental and Numerical Verification of Fatigue Life Estimation for Solder Bumps
- Thermal Fatigue Life of Solder Bumps in BGA
- The Contact Problem of an Elastic Half Space with an Adhered Rigid Punch
- Interaction of Ring-Shaped Edge Cracks in a Cylindrical Rod under Torsion
- The Torsion of a Hollow Cylinder with Many Internal Circumferential Cracks
- The Torsion of a Hollow Cylinder with Two or Infinite Parallel External Circular Cracks
- The Torsion of a Hollow Cylinder with an Internal Circular Crack
- The Torsion of a Hollow Cylinder with an External Crack
- On the Boundary Value Problems of Circular Loading for Transversely Isotropic Piezoelectric Half Space
- Improvement of Accuracy of Inverse Analysis for Stress Separation in Thermoelastic Stress Analysis
- Boundary Element Inverse Analysis for Stress Separation in Thermoelastic Stress Analysis
- Torsion of Compound Hollow Cylinder with an External Annular Crack
- Regularization of Numerical Inversion of the Laplace Transform for the Inverse Analysis of Impact Force
- CRACK INITIATION BEHAVIOR OF ABSRESIN UNDER MODE I AND MIXED MODE LOADING
- Inverse Analysis Related to Stress Separation in Thermoelastic Stress Analysis
- Inverse Analysis of the Magnitude and Direction of Impact Force
- Estimation of Impact Load by Inverse Analysis : Optimal Transfer Function for Inverse Analysis
- Numerical Laplace Transformation and Inversion using Fast Fourier Transform
- Measurement of Impact Load by using an Inverse Analysis Technique : Comparison of Methods for Estimating the Transfer Function and its Application to the Instrumented Charpy Impact Test
- Evaluation of the Effect of Flatness on the Contact Pressure Distribution between Jointed Plates by means of Ultrasonic techniques
- The Stress Singularity in a Stepped Bar Under Impact Torsion
- An Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with a Cylindrical Hole
- The Contact Problem Between an Elliptical Punch and an Elastic Half-Space with Friction : The Case of the Punch Subjected to Torsion
- The Contact Problem Between an Elliptical Punch and an Elastic Half Space with Friction : (The Case of the Punch Subjected to Moment)
- Indentation of an Elastic Half-space by a Concave Rigid Punch
- An Approximate Analysis of Stress Concentration around a Conical Hole in a Plate
- An Elastic Contact Problem of a Half-Space Indented by a Truncated Conical Stamp
- Effects of Peptide Dimerization on Pore Formation : Antiparallel Disulfide-Dimerized Magainin 2 Analog
- The Stress Distribution in a Thick Elastic Plate under Torsional Displacements by a Pair of Annular Rigid Punches
- A Crack Problem on a Slab with an Annular Crack Subjected to Pressure
- Free Oscillations in a Self-Sustained System with Solid Friction
- Ultrasonic Technique for Contact Mechanism Estimation of an Artificial Hip Joint
- The Contact Problem Between an Elliptical Punch and an Elastic Half Space with Friction : Series A : Solid-Mechanics, Strength of Materials
- The Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with a Cylindrical Protrusion or Pit
- Contact Stresses of an Elastic Plate Pressed onto a Rigid Base with a Cylindrical Protrusion or Pit
- Design Optimization of Surgical Drills Using the Taguchi Method
- Transient Thermal Stresses in a Half Plane with a Crack Parallel to the Surface
- Torsion Problem for Bonded Rods : Rods Bonded to Each Other by an Adhesive Layer
- On Numerical Solutions of Boundary Integral Equations
- On Integral Equation Methods for the Crack Problems
- Steady State Thermal Stresses in a Bonded Dissimilar Medium with an External Crack on the Interface
- Dynamic Interactions Between Cracks : Diffractions of SH Waves which are Incident on Griffith Cracks in an Infinite Body
- On Integral Equation Methods for Elastic Boundary Value Problems : 2nd Report, Indirect Methods for Static Problems
- Contact Stresses of an Elastic Layer Indented by a Concave Rigid Punch
- Partial Contact Problem of an Elastic Half-space Pressed Aslant by a Circular Rigid Punch
- Contact Stresses in Two Elastic Slabs and a Sandwiched Solid-Metal Flat Gasket
- The Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with an Annular Hole
- An Asymmetric Mixed Boundary-value Problem of the Elastic Halfspace under Shear by an Annular Rigid Punch
- The Indentation of a Thick Elastic Plate by Rigid Punches in the Arbitrary Shape
- The Effect of Bending on the Infinite Elastic Solid with an Annular Crack
- An Asymmetric Mixed Boundary Value Problem of the Elastic Half-Space Subjected to Moment by an Annular Rigid Punch
- The Axisymmetric Stress Distribution in an Infinite Elastic Solid Containing a Flat Annular Crack under Torsion
- Impact Stress Analysis of a Semi-Infinite Plate by the Finite Difference Method
- Lumbar Segmental Motion Properties In vivo Determined by a New Intraoperative Measurement System
- Thermomechanical Effects due to Hot Rolling Contact on the Energy Release Rates of Multiple Interface Cracks in Layered Media
- Some Mixed Boundary Value Problems for an Infinite Solid Containing a Flat Elliptical Crack
- CONTACT STRESS OF AN ELASTIC LAYER PRESSED ON A RIGID BASE WITH A SMOOTH PROTRUSION (SECOND REPORT)
- Contact Stress of an Elastic Layer Pressed on a Rigid Base with a Smooth Protrusion
- Contact Stresses of an Elastic Half-space Pressed on a Rigid Base with a Smooth Projection
- Contact Stresses in Two Elastic Bodies : Elastic Bodies are Rectangular Plates
- Contact Stresses in Two Elastic Bodies : Elastic Bodies are Finite Hollow Cylinders
- An Optimum Comfiguration for a Stepped Bar under Torsion.
- An Automatic System for Photoelastic Stress Analysis
- Stepped Cylindrical Rod Subjected to Axial Load
- The Torsion Problem of a Cylindrical Rod Composed of Semi-infinite Solid and Hollow Cylinders
- A Study of the Structural Analysis of Rigid Frame by the ε-Method Using a Digital Computer
- Oscillations Caused by Solid Friction in a Hydraulic Driving System : In the Case of Maximum Static Friction Equal to Kinetic Friction without Slipping
- An Axisymmetric Contact Problem of an Elastic Half-Space Pressed onto a Rigid Foundation with a Parabolic-Ended Pit and Protrusion
- The Effect of Shear on the Infinite Elastic Solid with an Annular Crack
- Ultrasonic Techniques for the Measurement of the Interfacial Stress between a Metallic Punch and Non-metallic Plates
- Development of an intraoperative measurement system of lumbar spinal mobility(Power Assist and Nursing 1,Session: TA1-C)
- Contact Pressure Measurements by Means of Ultrasonic Waves : On a Method of Quantitative Measurement
- Compressive Characteristics of Porcine Whole Liver
- Contact Stresses between Two Disks and a Sandwiched Solid-metal Flat Gasket
- -16-CORONARY HEMODYNAMICS DURING UPRIGHT EXCERCISE IN PATIENT WITH ANGINA PECTORIS
- A Mixed Boundary Value Problem of an Elastic Half-Space under Torsion by a Flat Annular Rigid Stamp
- Development and Evaluation of a System for Intraoperative Measurement of Spinal Rotational Mobility
- Morphological and Mechanical Evaluation of the Cancellous Bone in the Rat Femoral Head after Traumatic Osteonecrosis
- Development of a Novel Extra-Articular Device for Reducing the Weight-Bearing of the Hip Joint
- Fragility of Vertebral Trabecular Bone under Various Loading Orientations in Ovariectomized (OVX) Rats