The Effect of Bending on the Infinite Elastic Solid with an Annular Crack

スポンサーリンク

概要

• 論文の詳細を見る

• The problem considered is one of determining the stress field in the vicinity of an annular crack embedded in the infinite elastic solid under bending. The solution is obtained by assuming that the displacement component on the crack face may be expressed in the form of appropriate Fourier series and then the resulting system of integral equations to the problem of solving the infinite system of algebraic equations. The numerical results given in the paper include the stress intensity factors, and the stress and displacement distributions. The effect of the crack on the stress produced in the solid by an asymmetric normal loading is also considered.

• 一般社団法人日本機械学会の論文

著者

• NAKAHARA Ichiro

  Professor, Tokyo Institute of Technology

• Hara T

  Faculty Of Agriculture Niigata University

• Shibuya T

  Department Of Mechanical And Intelligent Systems Engineering Tokyo Institute Of Technology

• Shibuya Toshikazu

  Associate Professor Faculty Of Engineering Tokyo Institute Of Technology

• KOIZUMI Takashi

  Professor, Tokyo Institute of Technology

• HARA Toshiaki

  Postagraduate, Faculty of Engineering, Tokyo Institute of Technology

• Nakahara Ichiro

  Professor Tokyo Institute Of Technology

関連論文

• An Infinite Solid Cylinder Subjected to Two Diametrically Opposite Concentrated Loads
• Indentation by a Circular Rigid Punch of a Transversely Isotropic Layer on a Rigid Foundation
• An Axisymmetric Contact Problem of an Elastic Half-Space Pressed onto a Rigid Foundation with a Spherical-Ended Protrusion
• Indentation of a Penny-Shaped Crack by a Disc-Shaped Rigid Inclusion in an Elastic Layer
• An Axisymmetric Contact Problem of a Transversely Isotropic Layer Indented by an Annular Rigid Punch
• Torsion of an Elastic Layer on a Rigid Foundation with an Annular Hole
• Experimental and Numerical Verification of Fatigue Life Estimation for Solder Bumps
• Thermal Fatigue Life of Solder Bumps in BGA
• An Infinite Solid Containing a Flat Elliptical Crack under Shear
• On the Boundary Value Problems of Circular Loading for Transversely Isotropic Piezoelectric Half Space
• Improvement of Accuracy of Inverse Analysis for Stress Separation in Thermoelastic Stress Analysis
• Boundary Element Inverse Analysis for Stress Separation in Thermoelastic Stress Analysis
• Torsion of Compound Hollow Cylinder with an External Annular Crack
• Regularization of Numerical Inversion of the Laplace Transform for the Inverse Analysis of Impact Force
• CRACK INITIATION BEHAVIOR OF ABSRESIN UNDER MODE I AND MIXED MODE LOADING
• Inverse Analysis Related to Stress Separation in Thermoelastic Stress Analysis
• Inverse Analysis of the Magnitude and Direction of Impact Force
• Estimation of Impact Load by Inverse Analysis : Optimal Transfer Function for Inverse Analysis
• Numerical Laplace Transformation and Inversion using Fast Fourier Transform
• Measurement of Impact Load by using an Inverse Analysis Technique : Comparison of Methods for Estimating the Transfer Function and its Application to the Instrumented Charpy Impact Test
• Evaluation of the Effect of Flatness on the Contact Pressure Distribution between Jointed Plates by means of Ultrasonic techniques
• The Stress Singularity in a Stepped Bar Under Impact Torsion
• An Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with a Cylindrical Hole
• The Contact Problem Between an Elliptical Punch and an Elastic Half-Space with Friction : The Case of the Punch Subjected to Torsion
• The Contact Problem Between an Elliptical Punch and an Elastic Half Space with Friction : (The Case of the Punch Subjected to Moment)
• The Stress Distribution in a Thick Elastic Plate under Torsional Displacements by a Pair of Annular Rigid Punches
• Stresses in a Thick Plate Containing an Eccentric Spherical Cavity under Transverse Bending
• The Contact Problem Between an Elliptical Punch and an Elastic Half Space with Friction : Series A : Solid-Mechanics, Strength of Materials
• The Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with a Cylindrical Protrusion or Pit
• Contact Stresses of an Elastic Plate Pressed onto a Rigid Base with a Cylindrical Protrusion or Pit
• Transient Thermal Stresses in a Half Plane with a Crack Parallel to the Surface
• Torsion Problem for Bonded Rods : Rods Bonded to Each Other by an Adhesive Layer
• On Numerical Solutions of Boundary Integral Equations
• On Integral Equation Methods for the Crack Problems
• Steady State Thermal Stresses in a Bonded Dissimilar Medium with an External Crack on the Interface
• Dynamic Interactions Between Cracks : Diffractions of SH Waves which are Incident on Griffith Cracks in an Infinite Body
• On Integral Equation Methods for Elastic Boundary Value Problems : 2nd Report, Indirect Methods for Static Problems
• Contact Stresses of an Elastic Layer Indented by a Concave Rigid Punch
• Partial Contact Problem of an Elastic Half-space Pressed Aslant by a Circular Rigid Punch
• The Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with an Annular Hole
• An Asymmetric Mixed Boundary-value Problem of the Elastic Halfspace under Shear by an Annular Rigid Punch
• The Indentation of a Thick Elastic Plate by Rigid Punches in the Arbitrary Shape
• The Effect of Bending on the Infinite Elastic Solid with an Annular Crack
• An Asymmetric Mixed Boundary Value Problem of the Elastic Half-Space Subjected to Moment by an Annular Rigid Punch
• The Axisymmetric Stress Distribution in an Infinite Elastic Solid Containing a Flat Annular Crack under Torsion
• Impact Stress Analysis of a Semi-Infinite Plate by the Finite Difference Method
• Stress Concentration due to a Hemispherical Pit at a Free Surface of a Thick Plate under All-around Tension
• CONTACT STRESS OF AN ELASTIC LAYER PRESSED ON A RIGID BASE WITH A SMOOTH PROTRUSION (SECOND REPORT)
• Contact Stress of an Elastic Layer Pressed on a Rigid Base with a Smooth Protrusion
• Contact Stresses of an Elastic Half-space Pressed on a Rigid Base with a Smooth Projection
• Contact Stresses in Two Elastic Bodies : Elastic Bodies are Finite Hollow Cylinders
• An Optimum Comfiguration for a Stepped Bar under Torsion.
• An Automatic System for Photoelastic Stress Analysis
• Stepped Cylindrical Rod Subjected to Axial Load
• The Torsion Problem of a Cylindrical Rod Composed of Semi-infinite Solid and Hollow Cylinders
• Torsional Impulsive Response of an Elastic Half-Space due to a Rigid Circular Cylinder
• The Impact of an Elastic Cylinder on an Elastic Solid

もっと見る 閉じる

スポンサーリンク