CRACK INITIATION BEHAVIOR OF ABSRESIN UNDER MODE I AND MIXED MODE LOADING
スポンサーリンク
概要
- 論文の詳細を見る
Mode I and mixed mode loading testing of ABS resin were carried out by using compact tension shear specimens. Two types of ABS resin were examined. The first one (ABS-1) has a butadiene rubber content of 18 wt % in the form of small particles of diameter of about 200 nm. The second one (ABS-2) has the same overall butadiene rubger content but a bimodal particle distribution with diameters of 200 nm and 500 nm. Crack initiation behavior was observed by using a video microscope. The fracture toughness of ABS-2 obtained by mode I testing is larger than that of ABS-1. The fracture angle for both materials under mixed mode loading coincides with the values predicted by the maximum hoop stress criterion. On the contrary, at crack initiation under mixed mode loading, the critical values of K_1 and K_<11> are larger than those estimated by the masimum hoop stress criterion. The increase in the critical values of K_1 and K_<11> under mixed mode loading for ABS-2 is higher than those for ABS-1. The bimodal type distribution of rubber particle size produces better fracture resistance.
- 社団法人日本材料学会の論文
- 1997-09-15
著者
-
KISHIMOTO Kikuo
Department of Mechanical and Control Engineering, Tokyo Institute of Technology
-
Notomi Mitsuo
Department Of Mechanical And Intelligent Systems Engineering Tokyo Institute Of Technology
-
Kishimoto Kikuo
Department Of Mechanical And Control Engineering Tokyo Institute Of Technology
-
Kishimoto Kikuo
Department Of Mechanical And Intelligent Systems Engineering Tokyo Institute Of Technology
-
Shibuya T
Department Of Mechanical And Intelligent Systems Engineering Tokyo Institute Of Technology
-
Shibuya T
National Inst. Multimedia Education Chiba Jpn
-
SHIBUYA Toshikazu
Department of Mechanical and Intelligent Systems Eng., Tokyo Institute of Technology
-
Shibuya Toshikazu
Department Of Engineering Tokyo Institute Of Technology
関連論文
- Effect of Micro Porous Shape on Mechanical Properties in Polypropylene Syntactic Foams
- Modeling and Simulation of Impact Failure Characteristic of Polypropylene by Elastoviscoplastic Constitutive Law
- Free Vibration Analysis of Delaminated Composite Pretwisted Rotating Shells : A Finite Element Approach
- Microstructural Observation and Simulation of Micro Damage Evolution of Ternary Polypropylene Blend with Ethylene-Propylene-Rubber (EPR) and Talc
- A Key Matrix N^^^ for the Stress Singularity of the Anisotropic Elastic Composite Wedges
- Stress Separation in Thermoelastic Stress Analysis Using Nonlinearity of the Thermoelastic Effect(Advanced Technology of Experimental Mechanics)
- On Generalized Hamming Weights of Codes Constructed on Affine Algebraic Varieties (Special Section on Information Theory and Its Applications)
- On the Comparison of Lower Bounds for Generalized Hamming Weights
- Study on Elastic Moduli of Aluminum Alloy Foam under Uniaxial Loading and Flexural Vibration
- Simple Estimation for the Dimension of Subfield Subcodes of AG Codes
- An Improved Bound for the Dimension of Subfield Subcodes
- Indentation by a Circular Rigid Punch of a Transversely Isotropic Layer on a Rigid Foundation
- An Axisymmetric Contact Problem of an Elastic Half-Space Pressed onto a Rigid Foundation with a Spherical-Ended Protrusion
- Indentation of a Penny-Shaped Crack by a Disc-Shaped Rigid Inclusion in an Elastic Layer
- An Axisymmetric Contact Problem of a Transversely Isotropic Layer Indented by an Annular Rigid Punch
- Torsion of an Elastic Layer on a Rigid Foundation with an Annular Hole
- Experimental and Numerical Verification of Fatigue Life Estimation for Solder Bumps
- Thermal Fatigue Life of Solder Bumps in BGA
- On the Boundary Value Problems of Circular Loading for Transversely Isotropic Piezoelectric Half Space
- Improvement of Accuracy of Inverse Analysis for Stress Separation in Thermoelastic Stress Analysis
- Boundary Element Inverse Analysis for Stress Separation in Thermoelastic Stress Analysis
- Torsion of Compound Hollow Cylinder with an External Annular Crack
- Regularization of Numerical Inversion of the Laplace Transform for the Inverse Analysis of Impact Force
- CRACK INITIATION BEHAVIOR OF ABSRESIN UNDER MODE I AND MIXED MODE LOADING
- Inverse Analysis Related to Stress Separation in Thermoelastic Stress Analysis
- Inverse Analysis of the Magnitude and Direction of Impact Force
- Estimation of Impact Load by Inverse Analysis : Optimal Transfer Function for Inverse Analysis
- Numerical Laplace Transformation and Inversion using Fast Fourier Transform
- Measurement of Impact Load by using an Inverse Analysis Technique : Comparison of Methods for Estimating the Transfer Function and its Application to the Instrumented Charpy Impact Test
- Evaluation of the Effect of Flatness on the Contact Pressure Distribution between Jointed Plates by means of Ultrasonic techniques
- The Stress Singularity in a Stepped Bar Under Impact Torsion
- An Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with a Cylindrical Hole
- The Contact Problem Between an Elliptical Punch and an Elastic Half-Space with Friction : The Case of the Punch Subjected to Torsion
- The Contact Problem Between an Elliptical Punch and an Elastic Half Space with Friction : (The Case of the Punch Subjected to Moment)
- OS3(1)-2(OS03W0099) Stress Separation in Thermoelastic Stress Analysis Using Nonlinearity of the Thermoelastic Effect
- The Stress Distribution in a Thick Elastic Plate under Torsional Displacements by a Pair of Annular Rigid Punches
- A Simple Formula for the Dynamic Stress Intensity Factor of an Impacted Freely-Supported Bend Specimen
- Specimen Size Requirement for J Characterization Under Mixed Mode Loading
- Ductile Fracture Behavior Near a Crack Tip Under the Mixed More Condition
- Finte Element Analysis for Ductile Fracture Near a Crack Tip under Mixed Mode Conditions : Series A : Solid-Mechanics, Strength of Materials
- Stress Singularities of Multi-Bonded Anisotropic Wedges(Modeling & Simulation)
- The Contact Problem Between an Elliptical Punch and an Elastic Half Space with Friction : Series A : Solid-Mechanics, Strength of Materials
- The Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with a Cylindrical Protrusion or Pit
- Contact Stresses of an Elastic Plate Pressed onto a Rigid Base with a Cylindrical Protrusion or Pit
- Transient Thermal Stresses in a Half Plane with a Crack Parallel to the Surface
- Torsion Problem for Bonded Rods : Rods Bonded to Each Other by an Adhesive Layer
- On Numerical Solutions of Boundary Integral Equations
- On Integral Equation Methods for the Crack Problems
- Steady State Thermal Stresses in a Bonded Dissimilar Medium with an External Crack on the Interface
- Dynamic Interactions Between Cracks : Diffractions of SH Waves which are Incident on Griffith Cracks in an Infinite Body
- On Integral Equation Methods for Elastic Boundary Value Problems : 2nd Report, Indirect Methods for Static Problems
- Contact Stresses of an Elastic Layer Indented by a Concave Rigid Punch
- Partial Contact Problem of an Elastic Half-space Pressed Aslant by a Circular Rigid Punch
- Contact Stresses in Two Elastic Slabs and a Sandwiched Solid-Metal Flat Gasket
- The Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with an Annular Hole
- An Asymmetric Mixed Boundary-value Problem of the Elastic Halfspace under Shear by an Annular Rigid Punch
- The Indentation of a Thick Elastic Plate by Rigid Punches in the Arbitrary Shape
- The Effect of Bending on the Infinite Elastic Solid with an Annular Crack
- An Asymmetric Mixed Boundary Value Problem of the Elastic Half-Space Subjected to Moment by an Annular Rigid Punch
- The Axisymmetric Stress Distribution in an Infinite Elastic Solid Containing a Flat Annular Crack under Torsion
- Impact Stress Analysis of a Semi-Infinite Plate by the Finite Difference Method
- 1905 Band gap characteristics of elastic waves in phononic crystals with thermal stress
- CONTACT STRESS OF AN ELASTIC LAYER PRESSED ON A RIGID BASE WITH A SMOOTH PROTRUSION (SECOND REPORT)
- Contact Stress of an Elastic Layer Pressed on a Rigid Base with a Smooth Protrusion
- Contact Stresses of an Elastic Half-space Pressed on a Rigid Base with a Smooth Projection
- Contact Stresses in Two Elastic Bodies : Elastic Bodies are Finite Hollow Cylinders
- An Optimum Comfiguration for a Stepped Bar under Torsion.
- An Automatic System for Photoelastic Stress Analysis
- Stepped Cylindrical Rod Subjected to Axial Load
- The Torsion Problem of a Cylindrical Rod Composed of Semi-infinite Solid and Hollow Cylinders
- -16-CORONARY HEMODYNAMICS DURING UPRIGHT EXCERCISE IN PATIENT WITH ANGINA PECTORIS
- Some Elastic Contact Problems of an Elliptical Punch
- Interaction of Serum Proteins with Surface of Hemodialysis Fiber Membranes (Special Issue : Scanning Probe Microscopy)
- Residual Stress Analysis of Ceramic Thermal Barrier Coating Based on Thermal Spray Process