Contact Stresses in Two Elastic Bodies : Elastic Bodies are Rectangular Plates

スポンサーリンク

概要

• 論文の詳細を見る

• The contact problem of two laminated dissimilar rectangular plates subjected to an arbitrary symmetric loading is considered. The two dimensional theory of elasticity is used to analyse the contact stress and the deformation between the rectangular plates. By neglecting shearing stress on the contact surface, an exact solution satisfying the remaining boundary conditions is obtained. Numerical calculations are carried out for various rigidities and thicknesses of the plates under various loading conditions. In order to examine the results of the theoretical analysis, the contact stress is measured experimentally by using pressure-sensitive pins attached to a rectangular plate. It is confirmed that the theoretical results agree well with the experimental ones.

• 一般社団法人日本機械学会の論文

著者

• Koizumi Takashi

  Faculty of Engineering, Tokyo Institute of Technology

• Koizumi Takashi

  Tokyo Institute Of Technology

• Koizumi T

  Chuo Univ. Tokyo Jpn

• SAWA Toshiyuki

  Yamanashi Univ.

• Minakuchi Yoshihisa

  Faculty Of Engineering Yamanashi University

• YOSHIMINE Kanae

  Yamanashi Univ.

• Koizumi Takashi

  Tokyo Inst. Tech.

• Koizuml Takashi

  Faculty Of Engineering Tokyo Institute Of Technology

関連論文

• Elastic-Plastic Finite Element Analysis on Bonding Edge of Dissimilar Materials
• Indentation by a Circular Rigid Punch of a Transversely Isotropic Layer on a Rigid Foundation
• An Axisymmetric Contact Problem of an Elastic Half-Space Pressed onto a Rigid Foundation with a Spherical-Ended Protrusion
• Indentation of a Penny-Shaped Crack by a Disc-Shaped Rigid Inclusion in an Elastic Layer
• An Axisymmetric Contact Problem of a Transversely Isotropic Layer Indented by an Annular Rigid Punch
• Torsion of an Elastic Layer on a Rigid Foundation with an Annular Hole
• A Measuring Method of Impact Force Applied to a Plate
• Contact Pressure Measurement by Means of Ultrasonic Waves Using Angle Probes
• Torsion of a Two-part Cylindrical Rod
• The Contact Problem of an Elastic Half Space with an Adhered Rigid Punch
• Interaction of Ring-Shaped Edge Cracks in a Cylindrical Rod under Torsion
• The Torsion of a Hollow Cylinder with Many Internal Circumferential Cracks
• The Torsion of a Hollow Cylinder with Two or Infinite Parallel External Circular Cracks
• The Torsion of a Hollow Cylinder with an Internal Circular Crack
• The Torsion of a Hollow Cylinder with an External Crack
• Inverse Analysis of the Magnitude and Direction of Impact Force
• Estimation of Impact Load by Inverse Analysis : Optimal Transfer Function for Inverse Analysis
• Numerical Laplace Transformation and Inversion using Fast Fourier Transform
• Evaluation of the Effect of Flatness on the Contact Pressure Distribution between Jointed Plates by means of Ultrasonic techniques
• The Stress Singularity in a Stepped Bar Under Impact Torsion
• An Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with a Cylindrical Hole
• The Contact Problem Between an Elliptical Punch and an Elastic Half-Space with Friction : The Case of the Punch Subjected to Torsion
• The Contact Problem Between an Elliptical Punch and an Elastic Half Space with Friction : (The Case of the Punch Subjected to Moment)
• On characteristics of a bolted joint with a tap bolt
• The Force Ratio of Bolted Joints : The case where clamped parts are flanges
• The Stress Distribution in a Thick Elastic Plate under Torsional Displacements by a Pair of Annular Rigid Punches
• A Crack Problem on a Slab with an Annular Crack Subjected to Pressure
• Mechanical Problems in the Reconstruction of Anterior Cruciate Ligaments : Mechanical Compatibility between Living Tissues and Artificial Materials
• Effects of the Interface Configurations on the Characteristics of Bolted Joints : the case where clamped parts are two hollow cylinders
• The Strength of Joints Combining Adhesives with Bolts : Case where Adherends are Pipe Flanges of which the Interfaces are Bonded Partially
• The Contact Problem Between an Elliptical Punch and an Elastic Half Space with Friction : Series A : Solid-Mechanics, Strength of Materials
• The Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with a Cylindrical Protrusion or Pit
• Contact Stresses of an Elastic Plate Pressed onto a Rigid Base with a Cylindrical Protrusion or Pit
• Transient Thermal Stresses in a Half Plane with a Crack Parallel to the Surface
• Torsion Problem for Bonded Rods : Rods Bonded to Each Other by an Adhesive Layer
• On Numerical Solutions of Boundary Integral Equations
• On Integral Equation Methods for the Crack Problems
• Steady State Thermal Stresses in a Bonded Dissimilar Medium with an External Crack on the Interface
• Dynamic Interactions Between Cracks : Diffractions of SH Waves which are Incident on Griffith Cracks in an Infinite Body
• On Integral Equation Methods for Elastic Boundary Value Problems : 2nd Report, Indirect Methods for Static Problems
• Contact Stresses of an Elastic Layer Indented by a Concave Rigid Punch
• Partial Contact Problem of an Elastic Half-space Pressed Aslant by a Circular Rigid Punch
• Contact Stresses in Two Elastic Slabs and a Sandwiched Solid-Metal Flat Gasket
• The Axisymmetric Contact Problem of an Elastic Layer on a Rigid Base with an Annular Hole
• An Asymmetric Mixed Boundary-value Problem of the Elastic Halfspace under Shear by an Annular Rigid Punch
• The Indentation of a Thick Elastic Plate by Rigid Punches in the Arbitrary Shape
• The Axisymmetric Stress Distribution in an Infinite Elastic Solid Containing a Flat Annular Crack under Torsion
• Two-Dimensional Stress Analysis of Adhesive Butt Joints Subjected to Tear Loads : Series A : Solid-Mechanics, Strength of Materials
• Three-Dimensional Stress Analysis of Adhesive Butt Joints Subjected to Tensile Loads : The Case Where Adherends are Two Solid Cylinders
• Two-Dimensional Stress Analysis of Adhesive Butt Joints Subjected to External Bending Moments : Series A : Solid-Mechanics, Strength of Materials
• Two-dimensional Stress Analysis of Adhesive Butt Joints Subjected to Tensile Loads
• The Characteristics of Bolted Joints Subjected to External Bending Moments : (Analysis of the Case Where Clamped Parts are Pipe Flanges with Gaskets by Three-Dimensional Theory of Elasticity)
• The Characteristics of Bolted Joints Subjected to External Bending Moments : Analysis of the Case Where Clamped Parts are Pipe Flanges by Three-Dimensional Theory of Elasticity
• Characteristics of Bolted Joints Subjected to External Bending Moments : Analysis of the Case Where Clamped Parts are Circular Flanges by Three-Dimensional Theory of Elasticity
• Effects of the Interface Configurations on the Characteristics of Bolted Joints : The Case Where the Clamped Part is a Cover of Pressure Vessel
• On the Characteristics of Bolted Joints Subjected to Bending Moment : The Casees Where Clamped Parts are T-flanges of Which Interfaces Have Non-contacted Parts
• Axisymmetric Stress Analysis and Strength of Bonded Shrink-Fitted Joints Subjected to Push-Off Forces
• Effects of Plain Washers on the Characteristics of Bolted Joints : Series C : Vibration, Control Engineering, Engineering for Industry
• Effect of Mean Stress on Fatigue Crack Initiation and Propagation
• Thermal Stresses in a Long Solid Cylinder with Temperature-Dependent Properties
• Forced Vibrations in an Unsymmetric Piecewise-Linear System Excited by General Periodic Force Functions
• On the Characteristics of Bolted Joints with Gaskets : Stress Analysis of a Metal Flat Gasket Interposed between Two Hollow Cylinders
• On the Characteristics of Bolted Joints with Gaskets : stress analysis of full face metallic flat gaskets interposed between pipe flanges
• The Characteristics of Bolted Joints with GAskets : Considerations on the Effects by Multiple Bolts Fastening
• On the Characteristics of Bolted Joints with Gaskets : Stress analysis of rectangular metallic flat gaskets interposed between two T-flanges
• Effects of the Interface Configurations on the Characteristics of Bolted Joints : the case where clamped parts are pipe flanges
• CONTACT STRESS OF AN ELASTIC LAYER PRESSED ON A RIGID BASE WITH A SMOOTH PROTRUSION (SECOND REPORT)
• Contact Stress of an Elastic Layer Pressed on a Rigid Base with a Smooth Protrusion
• Contact Stresses of an Elastic Half-space Pressed on a Rigid Base with a Smooth Projection
• Effects of the Interface Configurations on the Characteristics of Bolted Joints : the case where clamped parts are circular flanges
• The Characteristics of Bolted Joints with Gaskets : Stress Analysis of a Metallic Flat Gasket Used for Raised Face in a Cover of Pressure Vessel
• On the Characteristic of a Bolted Joint Subjected to an External Bending Moment : The case where clamped parts are T-flanges
• A Simple Method to Calculate the Force Ratio of Bolted Joints : The case where clamped parts are T-flanges
• Features of Bolted Joints with Tap Bolts : Case where a Clamped Part with a Full Face Metallic Gasket is the Cover of a Pressure Vessel and a Circular Flange
• Contact Stresses in Two Elastic Bodies : Elastic Bodies are Rectangular Plates
• Axisymmetric Stress Analysis and Strength of Bonded Shrink-Fitted Joints of Solid Shaft Subjected to Torsional Loads
• Contact Stresses in Two Elastic Bodies : Elastic Bodies are Finite Hollow Cylinders
• Ultrasonic Measurement of Bone and Bone Marrow Thicknesses in Femur Covered with Flesh by Inserting a Hip Prosthesis Stem
• Ultrasonic Measurement of Thicknesses of Bone and Bone Marrow within. Femur Inserted with a Metal Stem
• Contact Stresses in Two Elastic Strips and a Sandwiched Solid-Metal Flat Gasket
• Contact Pressure Measurement by Means of Ultrasonic Waves : On a Bolted Joint with a Solid-metal Flat Gasket
• Stress Analysis of the Vicinity of an Elliptical Crack at the Interface of Two Bonded Elastic Half Spaces
• Contact Stresses between Two Thick Plates with a Circular Hole
• Contact Stresses between Two Rectangular Plates and a Sandwiched Solid-metal Flat Gasket
• An Optimum Comfiguration for a Stepped Bar under Torsion.
• An Automatic System for Photoelastic Stress Analysis
• Stepped Cylindrical Rod Subjected to Axial Load
• The Torsion Problem of a Cylindrical Rod Composed of Semi-infinite Solid and Hollow Cylinders
• Contact Pressure Measurements by Means of Ultrasonic Waves : On a Method of Quantitative Measurement
• On the Characteristics of Bolted Joints Subjected to External Bending Mometns : The Case Where Clamped Parts are T-flanges with Gaskets or Filler Plates
• On the Characteristics of Bolted Joints with Gaskets : Stress Analysis of Metallic Gaskets with Raised Face Interposed between Pipe Flanges
• Contact Stresses between Two Disks and a Sandwiched Solid-metal Flat Gasket
• The Characteristics of Bolted Joints with Tap Bolts Subjected to External Bending Moments : The Case Where a Clamped Part is T-Flange with a Full Face Metallic Gasket or a Filler Plate : Series C : Vibration Control Engineering Engineering for Industry
• Thermal Stresses in a Semi-infinite Body with an Instantaneous Heat Source on Its Surface

もっと見る 閉じる

スポンサーリンク