Influence of Properties of Fluxing Materials on the Flow of Melt Formed in the Sintering Process
スポンサーリンク
概要
- 論文の詳細を見る
Partial melting of raw materials and flow of the formed melt are essential phenomena for the agglomeration in the sintering bed of iron ores. A new experimental technique has been proposed which enables us to detect the macroscopic flow of melt formed during heating. Using this technique, the effects of the kind and particle size of fluxing materials and basicity of the mixture of raw materials were examined. Especially, it lays emphasis on the dolomite addition which will be effective to lower the slag ratio in the blast furnace operation by its replacement of serpentine. The present paper mainly describes the results of the melt-for-mation behavior in the cases using different types and particle sizes of dolomite samples comparing to those using serpentine. Further, a noteworthy phenomenon is pointed out that CaO component separated from MgO during heating course of dolomite tends to react with hematite and forms melt at lower temperature under certain conditions.
- 社団法人 日本鉄鋼協会の論文
- 2000-09-15
著者
-
NAKAMURA Takashi
Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University
-
KAWAGUCHI Takazo
Corporate Research & Development Laboratories, Sumitomo Metal Industries, Ltd.
-
Kasai Eiki
Institute For Advance Materials Processing Tohoku University
-
SAKANO Yorito
Faculty of Engineering, Tohoku University
-
Kawaguchi Takazo
Corporate R&d Laboratories Sumitomo Metal Industries Ltd.
-
Kawaguchi Takazo
Corporate Research And Development Laboratories Sumitomo Metal Industries Ltd
-
Sakano Yorito
Faculty Of Engineering Tohoku University
-
Nakamura Takashi
Institute For Health Outcomes And Process Evaluation Research
-
Nakamura Takashi
Institute for Advanced Material Processing, Tohoku University
関連論文
- Vapor Pressure of Zinc and Zinc Chloride in the Fe_tO-CaO-SiO_2-Al_2O_3 Slag System
- Vaporization Behavior of Zinc from the FeO-CaO-SiO_2-Al_2O_3 Slag System
- Vapor Pressure Measurements for Metal Chloride Systems by the Knudsen Effusion Method
- Production of Graphite Nanosheets by Low-Current Plasma Discharge in Liquid Ethanol
- Thermodynamic Properties of Polybrominated/chlorinated Dibenzo-p-dioxins Calculated by Density Functional Theory
- Thermodynamic Properties of Polybrominated Dibenzo-p-dioxins and Dibenzofurans Calculated by Density Functional Theory
- Vapour Pressure Determination for PCDD/Fs by Knudsen Effusion Method
- Vapour Pressure Determination for Dibenzo-p-dioxin, Dibenzofuran, Octachlorodibenzo-p-dioxin and Octachlorodibenzofuran Using a Knudsen Effusion Method
- Calculation of Thermodynamic Properties of Polybrominated Dibenzen-p-dioxins Using Molecular Orbital Method with Density Functional Theory
- DIOXIN EMISSIONS IN RECYCLING PROCESSES OF METALS
- Measurement of Thermodynamic Functions of Solid Phase for DD, DF,OCDD and OCDF, and Estimation of Thermodynamic Functions of Gas Phase for PCDD/Fs Using Molecular Orbital Method with Density Functional Theory
- Determination of Vapor Pressures of PCDD/Fs by Kundsen Method
- Catalytic Performance of Several Metallic Oxides on The Elimination Reactions of NO
- Nuclear Receptor Mediated Gene Regulation through Chromatin Remodeling and Histone Modifications
- Comparison of mariner-like Elements among Bombyx mandarina Individuals Inhabiting East Asia in the Light of the Segregation of B. mori and B. mandarina Genomes
- Discrepancy Between Disability and the Severity of Low Back Pain : Demographic, Psychologic, and Employment-Related Factors
- Validation of the Japanese version of the Roland-Morris Disability Questionnaire
- Thermodynamic Analysis of Thermochemical Recovery of High Temperature Wastes
- Trapping of Multiply Charged Ta Ions produced by Laser Ablation in an Ion Trap
- Analysis of Raw Material Flow with Axial Direction in Continuous Drum Mixer for Sintering Process
- Macroscopic Behaviors of Dioxins in the Iron Ore Sintering Plants
- G-6 A NEW METHOD FOR EVALUATING DEGRADATION OF SOLID OXIDE FUEL CELL UNDER OPERATING CONDITIONS BY COMBINING THE ELECTROCHEMICAL MEASUREMENT WITH NON-DESTRUCTIVE TEST(Session: Fuel Cell/Magnet)
- Differential Thermal Analysis of Assimilation and Melt-formation Phenomena in the Sintering Process of Iron Ores
- Rate of Methane-steam Reforming Reaction on the Surface of Molten BF Slag-for Heat Racovery from Molten Slag by Using a Chemical Reaction-
- Reduction in Dioxin Emissions by the Addition of Urea as Aqueous Solution to High-temperature Combustion Gas
- Effect of Cr_2O_3 and WO_3 Addition on Pore Formation and Microstructure in Iron Foam
- Lowering Reduction Temperature of Iron Ore and Carbon Composite by Using Ores with High Combined Water Content
- Reduction Behavior of Hematite Composite Containing Polyethylene and Graphite with Different Structures with Increasing Temperature
- Properties of Core Ore in Quasi-particle Required for Large Amounts Usage of Limonitic Ores in Iron Ore Sintering Process
- Mossbauer Study of α-, β- and γ-FeOOH
- Immobilization of Arsenic from Novel Synthesized Scorodite : Analysis on Solubility and Stability
- Laser-Microwave Double-Resonance Spectroscopy of Laser-Cooled ^9Be^+ Ions in a Weak Magnetic Field for Studying Unstable Be Isotopes
- Reduction Behavior of Chromium Oxide in Molten Slag Usin Aluminum, Ferrosilicon and Graphite
- Feasibility of Rotary Cup Atomizer for Slag Granulation
- The Role of Foaming Agent in Structure and Mechanical Performance of Al Based Foams
- Development of New Foaming Agent for Metal Foam
- Effect of Raw Materials Bed Segregation on the Structural Change of Iron Ore Sintering Bed
- A Distributed Problem Solving Environment (PSE) for Partial Differential Equation Based Problems
- GRINDING OF EP DUST AND ITS EFFECT ON SOLUBILITY OF METAL COMPOUNDS IN WATER
- EFFECT OF DRY MIXED GRINDING OF TALC, KAOLINITE AND GIBBSITE ON PREPARATION OF CORDIERITE CERAMICS
- Observation of Behavior of Dioxins and Some Relating Elements in Iron Ore Sintering Bed by Quenching Pot Test
- Volatilization Mechanism of Pb from Fly Ash in Municipal Waste Incinerator
- Generator Column Measurement and COSMO-RS Prediction of Aqueous Solubility of PCDDs/Fs
- A New Drying Process of Dusts and Sludge by Employing Heat Storage Materials
- Recent trends in the decomposition of chlorinated aromatic hydrocarbons by ultrasound irradiation and Fenton's reagent
- Effect of Additives on the Dioxins Emissions in the Iron Ore Sintering Process
- Carbothermic Reduction in the Combustion Bed Packed with Composite Pelles of Iron Oxide and Coal
- SWELL-PEELING METHOD FOR PAINTS ON ALUMINUM CANS
- Foaming Agents for Powder Metallurgy Production of Aluminum Foam
- Suppression of the Formation of Large Pores in the Assimilated Parts of Sinter Produced Using Pisolitic Ores
- Formation of Dioxins and their Transfer in the Combustion Bed of Coke and Soil Containing PVC
- Remediation Technologies of Ash and Soil Contaminated by Dioxins and Relating Hazardous Compounds
- (1) REMOVAL OF IRON BEARING MINERALS FROM BAUXITE BY HIGH GRADIENT MAGNETIC SEPARATOR (One-day Symposium on Separation Technology) (Miscellany)
- Heat Transfer Analysis of the Mosaic Embedding Iron Ore Sintering (MEBIOS) Process
- Process Analysis of the Effective Utilization of Molten Slag Heat by Direct Blast Furnace Cement Production System
- Analysis of Granules Behavior in Continuous Drum Mixer by DEM
- Numerical Simulation Model for Granulation Kinetics of Iron Ores
- Effect of Chlorine on the Vaporization Behavior of Zinc and Lead during High Temperature Treatment of Dust and Fly Ash
- Utilization of Ores with High Combined Water Content for Ore–carbon Composite and Iron Coke
- Genetics of the "Wild Silkworm Translucent" Mutant (ows) Discovered in the Progenies after the Cross between the Domesticated Silkworm, Bombyx mori and the wild Mulberry Silkworm, Bombyx mandarina
- Effect of Mixed-grinding on Reduction Process of Carbonaceous Material and Iron Oxide Composite
- Design of Bed Structure Aiming the Control of Void Structure Formed in the Sinter Cake
- Numerical Simulation Model of the Iron Ore Sintering Process Directly Describing the Agglomeration Phenomenon of Granules in the Packed Bed
- Modeling of Iron Ore Sintering Process by Combining Discrete Element Method and Gas-solid Heat Transfer Equiations
- Effect of Heat Wave Propagation on the Structural Changes in the Iron Ore Sintering Bed
- EFFECT OF MIXED DRINDING OF POWDERS ON SUPERCONDUCTING PROPERTIES OF YBa_2 Cu_3 O_ CERAMICS
- Effects of Slag Compositions on the Rate of Methane-Steam Reaction
- Theoretical Design of Cup Atomizer for Heat Recovery of Molten Slag by Chemical Quench
- Effect of Slag Basicity on the Rate of Methane-steam Reaction
- Activities of the Total Energy and Materials Control System Investigation Committee in the Japan Research and Development Center for Metals
- Essential Factors Governing Strength of Sintered Iron Ore Particles
- Development of a 3-D Sinter Process Mathematical Simulation Model
- Reduction Mechanism of Iron Oxide-Carbon Composite with Polyethylene at Lower Temperature
- Preface to the Special Issue on "Recent Progress of the Research on the Iron Ore Agglomeration Process"
- Influence of Properties of Fluxing Materials on the Flow of Melt Formed in the Sintering Process
- EFFECT OF WATER CONTENT ON GRINDABILITY OF DOLOMITE AND ITS STRUCTURAL CHANGE
- Froth Separation of Ferrihydrite Slurry Using Microbubbles with Ultrasonic Irradiation
- Improvement of Sinter Softening Property and Reducibility by Controlling Chemical Compositions
- Production of Carbon Included Sinter and Evaluation of Its Reactivity in a Blast Furnace Environment
- Sintering Behavior of Raw Material Bed Placing Large Particles
- Summarized Achievements of the Porous Meso-mosaic Texture Sinter Research Project
- Titanium Doped ITO Thin Films Produced by Sputtering Method
- Preliminary study for determination of PCDDs/Fs content in the wastewater and sewage sludge samples from a single municipal WWTP
- Wettability Effect on Bubble Formation at Nozzles in Liquid Aluminum
- Improvement of Sinter Productivity by Adding Return Fine on Raw Materials after Granulation Stage