Rate of Methane-steam Reforming Reaction on the Surface of Molten BF Slag-for Heat Racovery from Molten Slag by Using a Chemical Reaction-
スポンサーリンク
概要
- 論文の詳細を見る
- 1997-10-15
著者
-
KASAI Eiki
Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University
-
Saito Fumio
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
AKIYAMA Tomohiro
Miyagi National College of Technology
-
Saito Fumio
Institute For Advanced Materials Processing Tohoku University
-
Yagi J
Tohoku Univ. Sendai Jpn
-
Kasai Eiki
Institute For Advanced Materials Processing Tohoku University
-
KITAJIMA Takaya
Graduate Student, Faculty of Engineering, Tohoku University
-
YAGI Junichiro
Institute for Advanced Materials Processing, Tohoku University
-
Kitajima T
Tohoku Univ. Sendai Jpn
-
Kasai Eiki
Institute For Advance Materials Processing Tohoku University
関連論文
- Effect of Mechanical Milling on Carbothermic Reduction of Magnesia
- Vapor Pressure of Zinc and Zinc Chloride in the Fe_tO-CaO-SiO_2-Al_2O_3 Slag System
- Vaporization Behavior of Zinc from the FeO-CaO-SiO_2-Al_2O_3 Slag System
- Vapor Pressure Measurements for Metal Chloride Systems by the Knudsen Effusion Method
- Vapour Pressure Determination for PCDD/Fs by Knudsen Effusion Method
- Vapour Pressure Determination for Dibenzo-p-dioxin, Dibenzofuran, Octachlorodibenzo-p-dioxin and Octachlorodibenzofuran Using a Knudsen Effusion Method
- DIOXIN EMISSIONS IN RECYCLING PROCESSES OF METALS
- Measurement of Thermodynamic Functions of Solid Phase for DD, DF,OCDD and OCDF, and Estimation of Thermodynamic Functions of Gas Phase for PCDD/Fs Using Molecular Orbital Method with Density Functional Theory
- Determination of Vapor Pressures of PCDD/Fs by Kundsen Method
- Simulation of Mass Flow Rate of Particles Discharged from Hopper by Particle Element Method
- Catalytic Performance of Several Metallic Oxides on The Elimination Reactions of NO
- Relation between mechanochemical dechlorination rate of polyvinyl chloride and mill power consumption
- Mechanochemical dechlorination of polyvinyl chloride with calcium sulfates
- Reduction of Indium(III) Oxide to Indium through Mechanochemical Route
- Preparation of GaN Powder by Mechanochemical Treatment of Gallium under Ammonia Gas Environment
- Effects of Hydrogen Pressure and Cooling Rate on the Hydriding Combustion Synthesis of Mg_2NiH_4 Studied by Thermogravimetry and X-ray Diffraction
- Study on dry grinding of gibbsite (hydrargillite)
- Structural change of kaolinite and pyrophyllite induced by dry grinding
- Cold-model Experiments on Deadman Renewal Rate Due to Sink-Float Motion of Hearth Coke Bed
- Numerical Analysis of Static Holdup of Fine Particles in Blast Furnace
- Validation of a Blast Furnace Solid Flow Model Using Reliable 3-D Experimental Results
- Sophisticated Multi-phase Multi-flow Modeling of the Blast Furnace
- Thermodynamic Analysis of Thermochemical Recovery of High Temperature Wastes
- Metal Recovery and Dechlorination of an Evaporation Tape by Means of Mechanochemical Treatment
- Macroscopic Behaviors of Dioxins in the Iron Ore Sintering Plants
- Grinding of talc particulates by a high-speed rotor mixer
- Mechanochemical Synthesis of Fluorine-Doped SrTiO_3 and Its Photo-oxidation Properties
- Preparation of Visible Light-Activated Titania Photocatalyst by Mechanochemical Method
- EFFECT OF IRON POWDER ON COPPER EXTRACTION BY ACID LEACHING OF CHALCOPYRITE CONCENTRATE
- EFFECTS OF GRINDING AND HEMATITE ADDITION ON ACID LEACHING OF CHALCOPYRITE CONCENTRATE
- Synthesis of Niobium Carbides from Ferroniobium by Mechanochemical Method
- Differential Thermal Analysis of Assimilation and Melt-formation Phenomena in the Sintering Process of Iron Ores
- Effects of Grinding and Addition of Hematite on Acid Leaching of Chalcopyrite Concentrate by HCI Solution
- Effects of Grinding and Addition of lron Powder on Acid Leaching of Chalcopyrite Concentrate by HCI Solution
- Mechanochemical Synthesis of Hydroxyapatite from Constituent Power Mixtures by Dry Grinding
- Rate of Methane-steam Reforming Reaction on the Surface of Molten BF Slag-for Heat Racovery from Molten Slag by Using a Chemical Reaction-
- Reduction in Dioxin Emissions by the Addition of Urea as Aqueous Solution to High-temperature Combustion Gas
- Effect of Cr_2O_3 and WO_3 Addition on Pore Formation and Microstructure in Iron Foam
- Lowering Reduction Temperature of Iron Ore and Carbon Composite by Using Ores with High Combined Water Content
- Reduction Behavior of Hematite Composite Containing Polyethylene and Graphite with Different Structures with Increasing Temperature
- Numerical Analysis on EAF Dust Collection by High-Temperature Coke Moving-Bed Filter
- Effect of Dimethyl Ether Synthesis on Methanol- and Iron-making Integrated System
- Development of Cu/ZnO/Al_2O_3 Catalyst for Dimethyl Ether Synthesis from CO-CO_2-H_2 Mixture
- Feasibility of Rotary Cup Atomizer for Slag Granulation
- Effect of Mechanical Milling on Carbothermic Reduction of Magnesia
- Radicals in the Mechanochemical Dechlorination of Hazardous Organochlorine Compounds Using CaO Nanoparticles
- Non-thermal Process for Extraction of Rare Earth Merals from Bastnaesite by Means of Mechanochemical Treatment
- Estimation of Extraction Rate of Yttrium from Fluorescent Powder by Ball Milling
- Estimation of Size Reduction Rate of Gibbsite in Tumbling Mills with Different Diameters by Computer Simulation
- Correlation of Size Reduction Rate of Inorganic Materials with Impact Energy of Balls in Planetary Ball Milling
- Effect of Raw Materials Bed Segregation on the Structural Change of Iron Ore Sintering Bed
- Sulphidization of Metal Oxides by Means of Mechanochemical Solid Reaction
- GRINDING OF EP DUST AND ITS EFFECT ON SOLUBILITY OF METAL COMPOUNDS IN WATER
- EFFECT OF DRY MIXED GRINDING OF TALC, KAOLINITE AND GIBBSITE ON PREPARATION OF CORDIERITE CERAMICS
- Observation of Behavior of Dioxins and Some Relating Elements in Iron Ore Sintering Bed by Quenching Pot Test
- Recent trends in the decomposition of chlorinated aromatic hydrocarbons by ultrasound irradiation and Fenton's reagent
- Effects of Dry Grinding of Powder Mixture on Formation of Forsterite in Sintered Body and Its Mechanical Properties
- EFFECTS OF GRINDING ON FORMATION OF MULLITE IN A SINTERED BODY AND ITS MECHANICAL AND THERMAL PROPERTIES
- Effects of Dry Grinding of Powder Mixture on Formation of Cordierite in Sintered Body and Its Mechanical Properties
- Analysis of Granules Behavior in Continuous Drum Mixer by DEM
- Numerical Simulation Model for Granulation Kinetics of Iron Ores
- Mechanochemical Synthesis of Nano-sized Complex Fluorides from Pair of Different Constituent Fluoride Compounds
- Room temperature acid extraction of Co from LiCo_Ni_O_2 scrap by a mechanochemical treatment
- Decomposition of Polytetrafluoroethylene by Grinding with Strontium Oxide
- Effect of Mixed-grinding on Reduction Process of Carbonaceous Material and Iron Oxide Composite
- Analysis of abrasion mechanism of grinding media in a planetary mill with DEM simulation
- A method for simulating the three-dimensional motion of balls under the presence of a powder sample in a tumbling ball mill
- MECHANOCHEMICAL DECHLORINATION OF PVC
- Correlation of Ball Impact Energy with Yield of Soluble Vanadium Compound Produced in EP Dust by Dry Mechanochemical Treatment
- Zeolite Synthesis from Fly Ash : Current Processes and their Benefits and Drawbacks
- Correlation between the Grinding Rate Constant and the Impact Energy of Beads during Wet Bead Milling
- Effect of the friction coefficient in the discrete element method simulation on media motion in a wet bead mill
- Application of the DEM in Simulation of the Media Motion in a Wet Bead Mill
- Influence of polymer impurity on the mechanochemical dechlorination reaction of polyvinyl chloride
- Dechlorination of polyvinyl chloride by its grinding with KOH and NaOH
- Mechanochemical dechlorination of polyvinyl chloride by co-grinding with various metal oxides
- Reduction in α - Transformation Temperature of Gibbsite and Boehmite by Powder Mixing with Seed
- Effect of additives on dechlorination of PVC by mechanochemical treatment
- Ball mill simulation and powder characteristics of ground talc in various types of mill
- Amorphization of kaolinite and media motion in grinding by a double rotating cylinders mill-a comparison with a tumbling ball mill
- Simulation of Operational Power of Co-Axial Double Rotating Cylinders Mill by Particle Element Method
- EFFECT OF MIXED DRINDING OF POWDERS ON SUPERCONDUCTING PROPERTIES OF YBa_2 Cu_3 O_ CERAMICS
- Decomposition of Trichlorobenzene Isomers by Co-Grinding with CaO
- Mechanochemical Syntheses of Perovskite KM^F_3 with Cubic Structure (M^=Mg, Ca, Mn, Fe, Co, Ni, and Zn)
- Sonochemical Recovery of Metals from Recording Media
- Mechanochemical Synthesis of Ternary Fluorides with Perovskite Structures
- Room temperature Extrac8tion of Co and Li from LiCoO_2 followed by Mechanochemical Treatment
- Theoretical Design of Cup Atomizer for Heat Recovery of Molten Slag by Chemical Quench
- Effect of Slag Basicity on the Rate of Methane-steam Reaction
- Synthesis of Titanosilicate Zeolite from Bulk Titania via Mechanochemical Route
- EFFECT OF WATER CONTENT ON GRINDABILITY OF DOLOMITE AND ITS STRUCTURAL CHANGE
- Syntheses of Zeolite-A and X from Kaolinite Activated by Mechanochemical Treatment
- Discharge properties of Mg_2Ni-Ni alloy synthesized by mechanical alloying
- Mechanochemical solid-phase reactions between alkaline earth metal sulfates and alkali metal hydroxides
- Development of Vacuum Ultraviolet Streak Camera System for the Evaluation of Vacuum Ultraviolet Emitting Materials
- Formation of Mg_2Ni from Mg and Ni Powder Mixtures by the Use of a Planetary Ball Mill
- Laser Quality Ce3+:LiCaAlF6 Grown by Micro-Pulling-Down Method
- Amplification of Ultraviolet Femtosecond Pulse by a Micro-Pulling Down Method-Grown Ce:LiCAF Crystal in a Prismatic Cell-Type, Side-Pumping Configuration
- Effects of Initial Particle Size and Wet and Dry Grinding on Mullite Formation in Sintered Bodies.
- Laser Quality Ce3+:LiCaAlF6 Grown by Micro-Pulling-Down Method