Laser Quality Ce3+:LiCaAlF6 Grown by Micro-Pulling-Down Method
スポンサーリンク
概要
- 論文の詳細を見る
We describe the successful growth of a laser quality Ce3+:LiCaAlF6 crystal using the micro-pulling down method. The crystal is grown using less than one gram of raw material and a pulling rate of 0.1 mm/min. Ultraviolet laser emission at 290 nm with 23% slope efficiency and 1 mJ pulse energy is demonstrated from a Brewster-cut crystal, which is 30 mm in length and 2 mm in diameter. The flexibility and lower cost of this growth technique will markedly reduce the cost of growing laser grade crystals.
- Published by the Japan Society of Applied Physics through the Institute of Pure and Applied Physicsの論文
- 2008-07-25
著者
-
SARUKURA Nobuhiko
Institute for Molecular Science
-
Saito Fumio
Institute For Advanced Materials Processing Tohoku University
-
Furukawa Yusuke
Institute For Protein Research Osaka University
-
Yoshikawa Akira
Institute For Materials Research
-
Estacio Elmer
Institute Of Laser Engineering Osaka University
-
Fukuda Kentaro
Tokuyama Corporation
-
Nakazato Tomoharu
Institute Of Laser Engineering Osaka University
-
Suyama Toshihisa
Tokuyama Corporation, Chiyoda, Tokyo 100-8983, Japan
-
Furukawa Yusuke
Institute of Laser Engineering, Osaka University, Suita, Osaka 565-0871, Japan
-
Estacio Elmer
Institute of Laser Engineering, Osaka University, Suita, Osaka 565-0871, Japan
-
Tatsumi Toshihiro
Institute of Laser Engineering, Osaka University, Suita, Osaka 565-0871, Japan
-
Saiki Ayumi
Institute of Laser Engineering, Osaka University, Suita, Osaka 565-0871, Japan
-
Kim Kyoung
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai 980-8577, Japan
-
Pham Minh
Institute for Molecular Science, Okazaki, Aichi 444-8585, Japan
-
Kim Kyoung
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan
-
Cadatal Marilou
Institute for Molecular Science (IMS), Myodaiji, Okazaki, Aichi 444-8585, Japan
-
Cadatal Marilou
Institute for Molecular Science, Okazaki, Aichi 444-8585, Japan
関連論文
- Simulation of Mass Flow Rate of Particles Discharged from Hopper by Particle Element Method
- Ce^-Doped LiCaAlF_6 Crystals as a Solid-State Ultraviolet Saturable Absorber and Role of Excited State Absorption
- Mode-locking Stability Adjustment of a Kerr-lens Mode-locked Ti : sapphire Laser, Analyzed by a Recently Developed Real-time Spectrum Analyzer
- 0.43 J, 10 Hz Fourth Harmonic Generation of Nd:YAG Laser Using Large Li2B407 Crystals : Optics and Quantum Electronics
- Far-Infrared Absorption Measurements of Polypeptides and Cytochrome c by THz Radiation
- Relation between mechanochemical dechlorination rate of polyvinyl chloride and mill power consumption
- Mechanochemical dechlorination of polyvinyl chloride with calcium sulfates
- Reduction of Indium(III) Oxide to Indium through Mechanochemical Route
- Preparation of GaN Powder by Mechanochemical Treatment of Gallium under Ammonia Gas Environment
- Study on dry grinding of gibbsite (hydrargillite)
- Structural change of kaolinite and pyrophyllite induced by dry grinding
- Tunable Ultraviolet Short-Pulse Generation from a Ce:LiCAF Laser Amplifier System and Its Sum-Frequency Mixing with an Nd:YAG Laser
- All-solid-state tunable ultraviolet picosecond Ce : LuLiF_4 laser
- Tunable Ultraviolet Short-Pulse Generation from a Ce : LiCAF master oscillator and power amplifier system
- Subnanosecond Tunable Ultraviolet Pulse Generation from a Low-Q, Short-Cavity Ce:LiCAF Laser
- Generation of THz Radiation from Resonant Absorption in Strained Multiple Quantum Wells in a Magnetic Field : Optics and Quantum Electronics
- Efficient Terahertz Radiation Generation from a Bulk InAs Mirror as an Intracavity Terahertz Radiation Emitter
- THz Radiation from Intracavity Saturable Bragg Reflector in Magnetic Field with Self-Started Mode-Locking by Strained Saturable Bragg Reflector
- High Average Power Mode Locked Ti:Sapphire Laser with Intracavity Continuous-Wave Amplifier and Strained Saturable Bragg Reflector
- Metal Recovery and Dechlorination of an Evaporation Tape by Means of Mechanochemical Treatment
- THz-radiation Generation from an Intracavity Saturable Bragg Reflector in a Magnetic Field
- High-Pulse-Energy Ultraviolet Ce^ : LiCaAIF_6 Laser Oscillator with Newly Designed Pumping Schemes
- High-Pulse-Energy, All-Solid-State, Ultraviolet Laser Oscillator Using Large Czochralski-Grown Ce:LiCAF Crystal
- Grinding of talc particulates by a high-speed rotor mixer
- Mechanochemical Synthesis of Fluorine-Doped SrTiO_3 and Its Photo-oxidation Properties
- Preparation of Visible Light-Activated Titania Photocatalyst by Mechanochemical Method
- Magnetic-Field-Induced Enhancement of THz-Radiation Power from Femtosecond-Laser-Irradiated InAs up 27T
- EFFECT OF IRON POWDER ON COPPER EXTRACTION BY ACID LEACHING OF CHALCOPYRITE CONCENTRATE
- EFFECTS OF GRINDING AND HEMATITE ADDITION ON ACID LEACHING OF CHALCOPYRITE CONCENTRATE
- Synthesis of Niobium Carbides from Ferroniobium by Mechanochemical Method
- Identification of Potential Estrogenic Environmental Pollutants by Terahertz Transmission Spectroscopy
- Differential Thermal Analysis of Assimilation and Melt-formation Phenomena in the Sintering Process of Iron Ores
- Effects of Grinding and Addition of Hematite on Acid Leaching of Chalcopyrite Concentrate by HCI Solution
- Effects of Grinding and Addition of lron Powder on Acid Leaching of Chalcopyrite Concentrate by HCI Solution
- Mechanochemical Synthesis of Hydroxyapatite from Constituent Power Mixtures by Dry Grinding
- Rate of Methane-steam Reforming Reaction on the Surface of Molten BF Slag-for Heat Racovery from Molten Slag by Using a Chemical Reaction-
- Design Proposal of Light Emitting Diode in Vacuum Ultraviolet Based on Perovskite-Like Fluoride Crystals
- Physical Origin of Magnetically Induced Periodic Structure Observed in Terahertz Radiation Spectrum Emitted from InAs
- Teflon Photonic Crystal Fiber as Terahertz Waveguide
- Optical Property of Ce^3+-ion-doped LiCaAlF_6 Crystal in Vacuum Ultraviolet Region
- Simultaneous Measurement of Thickness and Water Content of Thin Black Ink Films for the Printing Using THz Radiation : Optics and Quantum Electronics
- THz-Radiation Emitter and Receiver System Based on a 2 T Permanent Magnet, 1040 nm Compact Fiber Laser and Pyroelectric Thermal Receiver : Optics and Quantum
- Enhanced THz Radiation from Femtosecond Laser Pulse Irradiated InAs Clean Surface
- Growth and Characterization of KMgF_3 Single Crystals by the Czochralski Technique under CF_4 Atmosphere
- Direct Generation of 27/mj,309-nm Pulses from a Cu^:LiLuF_4 Oscillator Using a Large-Size Ce^:LiLuF_4 Crystal
- High average power THz-radiation from femtosecond laser irradiated InAs under the magnetic field
- Effect of Mechanical Milling on Carbothermic Reduction of Magnesia
- Radicals in the Mechanochemical Dechlorination of Hazardous Organochlorine Compounds Using CaO Nanoparticles
- Non-thermal Process for Extraction of Rare Earth Merals from Bastnaesite by Means of Mechanochemical Treatment
- Estimation of Extraction Rate of Yttrium from Fluorescent Powder by Ball Milling
- Estimation of Size Reduction Rate of Gibbsite in Tumbling Mills with Different Diameters by Computer Simulation
- Correlation of Size Reduction Rate of Inorganic Materials with Impact Energy of Balls in Planetary Ball Milling
- Sulphidization of Metal Oxides by Means of Mechanochemical Solid Reaction
- GRINDING OF EP DUST AND ITS EFFECT ON SOLUBILITY OF METAL COMPOUNDS IN WATER
- EFFECT OF DRY MIXED GRINDING OF TALC, KAOLINITE AND GIBBSITE ON PREPARATION OF CORDIERITE CERAMICS
- Reduction of Nonlinear Absorption in Li2B4O7 by Temperature- and Repetition Rate-Control
- Design Proposal of Light Emitting Diode in Vacuum Ultraviolet Based on Perovskite-Like Fluoride Crystals
- Physical Origin of Magnetically Induced Periodic Structure Observed in Terahertz Radiation Spectrum Emitted from InAs
- Teflon Photonic Crystal Fiber as Terahertz Waveguide
- Identification of Potential Estrogenic Environmental Pollutants by Terahertz Transmission Spectroscopy
- Effects of Pulse Rate and Temperature on Nonlinear Absorption of Pulsed 262-nm Laser Light in $\beta$-BaB2O4
- Effects of Dry Grinding of Powder Mixture on Formation of Forsterite in Sintered Body and Its Mechanical Properties
- EFFECTS OF GRINDING ON FORMATION OF MULLITE IN A SINTERED BODY AND ITS MECHANICAL AND THERMAL PROPERTIES
- Effects of Dry Grinding of Powder Mixture on Formation of Cordierite in Sintered Body and Its Mechanical Properties
- Analysis of Granules Behavior in Continuous Drum Mixer by DEM
- Numerical Simulation Model for Granulation Kinetics of Iron Ores
- Mechanochemical Synthesis of Nano-sized Complex Fluorides from Pair of Different Constituent Fluoride Compounds
- Room temperature acid extraction of Co from LiCo_Ni_O_2 scrap by a mechanochemical treatment
- Decomposition of Polytetrafluoroethylene by Grinding with Strontium Oxide
- Effect of Mixed-grinding on Reduction Process of Carbonaceous Material and Iron Oxide Composite
- Analysis of abrasion mechanism of grinding media in a planetary mill with DEM simulation
- A method for simulating the three-dimensional motion of balls under the presence of a powder sample in a tumbling ball mill
- MECHANOCHEMICAL DECHLORINATION OF PVC
- Correlation of Ball Impact Energy with Yield of Soluble Vanadium Compound Produced in EP Dust by Dry Mechanochemical Treatment
- Zeolite Synthesis from Fly Ash : Current Processes and their Benefits and Drawbacks
- Correlation between the Grinding Rate Constant and the Impact Energy of Beads during Wet Bead Milling
- Effect of the friction coefficient in the discrete element method simulation on media motion in a wet bead mill
- Application of the DEM in Simulation of the Media Motion in a Wet Bead Mill
- Influence of polymer impurity on the mechanochemical dechlorination reaction of polyvinyl chloride
- Dechlorination of polyvinyl chloride by its grinding with KOH and NaOH
- Mechanochemical dechlorination of polyvinyl chloride by co-grinding with various metal oxides
- Reduction in α - Transformation Temperature of Gibbsite and Boehmite by Powder Mixing with Seed
- Effect of additives on dechlorination of PVC by mechanochemical treatment
- Ball mill simulation and powder characteristics of ground talc in various types of mill
- Amorphization of kaolinite and media motion in grinding by a double rotating cylinders mill-a comparison with a tumbling ball mill
- Response Time-Shortened Zinc Oxide Scintillator for Accurate Single-Shot Synchronization of Extreme Ultraviolet Free-Electron Laser and Short-Pulse Laser
- Fast-response, low-afterglow 4,4'''-bis〔(2-butyloctyl)oxy〕-1,1':4',1":4",1'''-quarterphenyl dye-based liquid scintillator for high-contrast detection of laser fusion-generated neutrons
- Development of Vacuum Ultraviolet Streak Camera System for the Evaluation of Vacuum Ultraviolet Emitting Materials
- Evaluation of Soft X-ray Laser with In situ Imaging Device of High Spatial Resolution ZnO Scintillator
- Laser Quality Ce3+:LiCaAlF6 Grown by Micro-Pulling-Down Method
- Optical Characteristic Improvement of Neodymium-Doped Lanthanum Fluoride Thin Films Grown by Pulsed Laser Deposition for Vacuum Ultraviolet Application
- Ce3+-Doped LiCaAlF6 Crystals as a Solid-State Ultraviolet Saturable Absorber and Role of Excited State Absorption
- Band-Structure Design of Fluoride Complex Materials for Deep-Ultraviolet Light-Emitting Diodes
- Systematic Study on Ce:LuLiF4 as a Fast Scintillator Using Storage Ring Free-Electron Lasers
- Magnetic-Field-Induced Enhancement of THz-Radiation Power from Femtosecond-Laser-Irradiated InAs up to 27 T
- Time-Resolved Pump and Probe Experiment for Wide-Gap Semiconductors Using Free Electron Laser and Synchronously-Operated Femtosecond Laser
- Mode-locking Stability Adjustment of a Kerr-lens Mode-locked Ti:sapphire Laser, Analyzed by a Recently Developed Real-time Spectrum Analyzer
- Terahertz-Radiation Photoconductive Antenna in Sputtered Zinc Oxide Thin Film
- Vacuum Ultraviolet Fluorescence Spectroscopy of Nd^:LaF_3 Using Femtosecond Extreme Ultraviolet Free Electron Laser
- Laser Quality Ce3+:LiCaAlF6 Grown by Micro-Pulling-Down Method