Numerical Simulation Model for Granulation Kinetics of Iron Ores
スポンサーリンク
概要
- 論文の詳細を見る
A numerical simulation model was developed to analyze the granulation kinetics by using the Discrete Element Method (DEM). The experiment of granulation was performed to understand the actual granulation behavior of iron ore particles. The granulation rate goes up with a decrease in a particles charge ratio and with an increase in a rotational speed of a drum mixer in the experiment. The granulation could be consisted of two processes: One is “a growing process” and the other is “a breaking process”. The former would be related to the rotation of granules and the latter would be dependent on the impact, which granules receive from others and/or a drum mixer wall. Then rotational kinetic energy and impact energy of a granule were calculated by using the DEM simulation. A granulation energy composed of both the impact energy and the rotational kinetic energy was proposed for analyzing the granulation kinetics. It increases as the rotational speed of the drum mixer rises and as the granule charge ratio drops. The granulation energy would be correlated with the actual granulation process. When the drum mixer diameter becomes large, the granulation energy decreases. When the drum mixer is leaned, the granulation energy becomes larger than at the lean of 0 degrees. That is, the drum mixer has a possibility to improve the granulation process. When the drum mixer is leaned further, the granulation energy rapidly decreases at the lean of 60 degrees. The optimum leaning angle must be.
- 社団法人 日本鉄鋼協会の論文
- 2005-04-15
著者
-
Kano Junya
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
Saito Fumio
Institute For Advanced Materials Processing Tohoku University
-
Kasai Eiki
Institute For Advanced Materials Processing Tohoku University
-
Kano Junya
Institute For Advanced Materials Processing Tohoku University
-
KAWAGUCHI Takazo
Corporate Research & Development Laboratories, Sumitomo Metal Industries, Ltd.
-
Kasai Eiki
Inst. Of Multidisciplinary Res. For Advanced Materials Tohoku Univ.
-
Kasai Eiki
Institute For Advance Materials Processing Tohoku University
-
Kawaguchi Takazo
Sumitomo Metal Industries Ltd.
-
Kawaguchi Takazo
Corporate R&d Laboratories Sumitomo Metal Industries Ltd.
-
KAWAGUCHI Takazo
Corporate R&D, Sumitomo Metal Industries, Ltd.
関連論文
- Influences of Physical Properties of Particle in Discrete Element Method on Descending Phenomena and Stress Distribution in Blast Furnace
- Transient Behavior of Burden Descending and Influence of Cohesive Zone Shape on Solid Flow and Stress Distribution in Blast Furnace by Discrete Element Method
- Effect of Mechanical Milling on Carbothermic Reduction of Magnesia
- Vapor Pressure of Zinc and Zinc Chloride in the Fe_tO-CaO-SiO_2-Al_2O_3 Slag System
- Vaporization Behavior of Zinc from the FeO-CaO-SiO_2-Al_2O_3 Slag System
- Vapor Pressure Measurements for Metal Chloride Systems by the Knudsen Effusion Method
- Vapour Pressure Determination for PCDD/Fs by Knudsen Effusion Method
- Vapour Pressure Determination for Dibenzo-p-dioxin, Dibenzofuran, Octachlorodibenzo-p-dioxin and Octachlorodibenzofuran Using a Knudsen Effusion Method
- DIOXIN EMISSIONS IN RECYCLING PROCESSES OF METALS
- Measurement of Thermodynamic Functions of Solid Phase for DD, DF,OCDD and OCDF, and Estimation of Thermodynamic Functions of Gas Phase for PCDD/Fs Using Molecular Orbital Method with Density Functional Theory
- Determination of Vapor Pressures of PCDD/Fs by Kundsen Method
- Simulation of Mass Flow Rate of Particles Discharged from Hopper by Particle Element Method
- Catalytic Performance of Several Metallic Oxides on The Elimination Reactions of NO
- Simultaneous Three-dimensional Analysis of Gas–Solid Flow in Blast Furnace by Combining Discrete Element Method and Computational Fluid Dynamics
- Dynamic Analysis of Gas and Solid Flows in Blast Furnace with Shaft Gas Injection by Hybrid Model of DEM-CFD
- Relation between mechanochemical dechlorination rate of polyvinyl chloride and mill power consumption
- Mechanochemical dechlorination of polyvinyl chloride with calcium sulfates
- Reduction of Indium(III) Oxide to Indium through Mechanochemical Route
- Preparation of GaN Powder by Mechanochemical Treatment of Gallium under Ammonia Gas Environment
- Study on dry grinding of gibbsite (hydrargillite)
- Structural change of kaolinite and pyrophyllite induced by dry grinding
- Metal Recovery and Dechlorination of an Evaporation Tape by Means of Mechanochemical Treatment
- Macroscopic Behaviors of Dioxins in the Iron Ore Sintering Plants
- Grinding of talc particulates by a high-speed rotor mixer
- Mechanochemical Synthesis of Fluorine-Doped SrTiO_3 and Its Photo-oxidation Properties
- Preparation of Visible Light-Activated Titania Photocatalyst by Mechanochemical Method
- EFFECT OF IRON POWDER ON COPPER EXTRACTION BY ACID LEACHING OF CHALCOPYRITE CONCENTRATE
- EFFECTS OF GRINDING AND HEMATITE ADDITION ON ACID LEACHING OF CHALCOPYRITE CONCENTRATE
- Characteristics of Solid Flow and Stress Distribution Including Asymmetric Phenomena in Blast Furnace Analyzed by Discrete Element Method
- Optimization of Physical Parameters of Discrete Element Method for Blast Furnace and Its Application to the Analysis on Solid Motion around Raceway
- Synthesis of Niobium Carbides from Ferroniobium by Mechanochemical Method
- Differential Thermal Analysis of Assimilation and Melt-formation Phenomena in the Sintering Process of Iron Ores
- Effects of Grinding and Addition of Hematite on Acid Leaching of Chalcopyrite Concentrate by HCI Solution
- Effects of Grinding and Addition of lron Powder on Acid Leaching of Chalcopyrite Concentrate by HCI Solution
- Mechanochemical Synthesis of Hydroxyapatite from Constituent Power Mixtures by Dry Grinding
- Rate of Methane-steam Reforming Reaction on the Surface of Molten BF Slag-for Heat Racovery from Molten Slag by Using a Chemical Reaction-
- Reduction in Dioxin Emissions by the Addition of Urea as Aqueous Solution to High-temperature Combustion Gas
- Effect of Cr_2O_3 and WO_3 Addition on Pore Formation and Microstructure in Iron Foam
- Lowering Reduction Temperature of Iron Ore and Carbon Composite by Using Ores with High Combined Water Content
- Reduction Behavior of Hematite Composite Containing Polyethylene and Graphite with Different Structures with Increasing Temperature
- Tungsten Extraction from Scheelite by means of Mechanochemistry and Heating
- Effect of Mechanical Milling on Carbothermic Reduction of Magnesia
- Radicals in the Mechanochemical Dechlorination of Hazardous Organochlorine Compounds Using CaO Nanoparticles
- Non-thermal Process for Extraction of Rare Earth Merals from Bastnaesite by Means of Mechanochemical Treatment
- Estimation of Extraction Rate of Yttrium from Fluorescent Powder by Ball Milling
- Estimation of Size Reduction Rate of Gibbsite in Tumbling Mills with Different Diameters by Computer Simulation
- Correlation of Size Reduction Rate of Inorganic Materials with Impact Energy of Balls in Planetary Ball Milling
- Sulphidization of Metal Oxides by Means of Mechanochemical Solid Reaction
- GRINDING OF EP DUST AND ITS EFFECT ON SOLUBILITY OF METAL COMPOUNDS IN WATER
- EFFECT OF DRY MIXED GRINDING OF TALC, KAOLINITE AND GIBBSITE ON PREPARATION OF CORDIERITE CERAMICS
- Observation of Behavior of Dioxins and Some Relating Elements in Iron Ore Sintering Bed by Quenching Pot Test
- Transient Behavior of Burden Descending and Influence of Cohesive Zone Shape on Solid Flow and Stress Distribution in Blast Furnace by Discrete Element Method
- A New Drying Process of Dusts and Sludge by Employing Heat Storage Materials
- Recent trends in the decomposition of chlorinated aromatic hydrocarbons by ultrasound irradiation and Fenton's reagent
- Effect of Additives on the Dioxins Emissions in the Iron Ore Sintering Process
- Effects of Dry Grinding of Powder Mixture on Formation of Forsterite in Sintered Body and Its Mechanical Properties
- EFFECTS OF GRINDING ON FORMATION OF MULLITE IN A SINTERED BODY AND ITS MECHANICAL AND THERMAL PROPERTIES
- Effects of Dry Grinding of Powder Mixture on Formation of Cordierite in Sintered Body and Its Mechanical Properties
- Analysis of Granules Behavior in Continuous Drum Mixer by DEM
- Numerical Simulation Model for Granulation Kinetics of Iron Ores
- Mechanochemical Synthesis of Nano-sized Complex Fluorides from Pair of Different Constituent Fluoride Compounds
- Room temperature acid extraction of Co from LiCo_Ni_O_2 scrap by a mechanochemical treatment
- Decomposition of Polytetrafluoroethylene by Grinding with Strontium Oxide
- Effect of Mixed-grinding on Reduction Process of Carbonaceous Material and Iron Oxide Composite
- Analysis of abrasion mechanism of grinding media in a planetary mill with DEM simulation
- A method for simulating the three-dimensional motion of balls under the presence of a powder sample in a tumbling ball mill
- MECHANOCHEMICAL DECHLORINATION OF PVC
- Correlation of Ball Impact Energy with Yield of Soluble Vanadium Compound Produced in EP Dust by Dry Mechanochemical Treatment
- Zeolite Synthesis from Fly Ash : Current Processes and their Benefits and Drawbacks
- Correlation between the Grinding Rate Constant and the Impact Energy of Beads during Wet Bead Milling
- Effect of the friction coefficient in the discrete element method simulation on media motion in a wet bead mill
- Application of the DEM in Simulation of the Media Motion in a Wet Bead Mill
- Influence of polymer impurity on the mechanochemical dechlorination reaction of polyvinyl chloride
- Dechlorination of polyvinyl chloride by its grinding with KOH and NaOH
- Mechanochemical dechlorination of polyvinyl chloride by co-grinding with various metal oxides
- Reduction in α - Transformation Temperature of Gibbsite and Boehmite by Powder Mixing with Seed
- Effect of additives on dechlorination of PVC by mechanochemical treatment
- Ball mill simulation and powder characteristics of ground talc in various types of mill
- Numerical Simulation Model of the Iron Ore Sintering Process Directly Describing the Agglomeration Phenomenon of Granules in the Packed Bed
- Amorphization of kaolinite and media motion in grinding by a double rotating cylinders mill-a comparison with a tumbling ball mill
- Simulation of Operational Power of Co-Axial Double Rotating Cylinders Mill by Particle Element Method
- Modeling of Iron Ore Sintering Process by Combining Discrete Element Method and Gas-solid Heat Transfer Equiations
- Effect of Heat Wave Propagation on the Structural Changes in the Iron Ore Sintering Bed
- EFFECT OF MIXED DRINDING OF POWDERS ON SUPERCONDUCTING PROPERTIES OF YBa_2 Cu_3 O_ CERAMICS
- Decomposition of Trichlorobenzene Isomers by Co-Grinding with CaO
- Mechanochemical Syntheses of Perovskite KM^F_3 with Cubic Structure (M^=Mg, Ca, Mn, Fe, Co, Ni, and Zn)
- Sonochemical Recovery of Metals from Recording Media
- Mechanochemical Synthesis of Ternary Fluorides with Perovskite Structures
- Room temperature Extrac8tion of Co and Li from LiCoO_2 followed by Mechanochemical Treatment
- Synthesis of Titanosilicate Zeolite from Bulk Titania via Mechanochemical Route
- EFFECT OF WATER CONTENT ON GRINDABILITY OF DOLOMITE AND ITS STRUCTURAL CHANGE
- Syntheses of Zeolite-A and X from Kaolinite Activated by Mechanochemical Treatment
- Discharge properties of Mg_2Ni-Ni alloy synthesized by mechanical alloying
- Mechanochemical solid-phase reactions between alkaline earth metal sulfates and alkali metal hydroxides
- Development of Vacuum Ultraviolet Streak Camera System for the Evaluation of Vacuum Ultraviolet Emitting Materials
- Formation of Mg_2Ni from Mg and Ni Powder Mixtures by the Use of a Planetary Ball Mill
- Laser Quality Ce3+:LiCaAlF6 Grown by Micro-Pulling-Down Method
- Amplification of Ultraviolet Femtosecond Pulse by a Micro-Pulling Down Method-Grown Ce:LiCAF Crystal in a Prismatic Cell-Type, Side-Pumping Configuration
- Effects of Initial Particle Size and Wet and Dry Grinding on Mullite Formation in Sintered Bodies.
- Laser Quality Ce3+:LiCaAlF6 Grown by Micro-Pulling-Down Method