Amplification of Ultraviolet Femtosecond Pulse by a Micro-Pulling Down Method-Grown Ce:LiCAF Crystal in a Prismatic Cell-Type, Side-Pumping Configuration
スポンサーリンク
概要
- 論文の詳細を見る
We propose an efficient side-pumping scheme for ultraviolet (UV) femtosecond pulse amplification in micro-pulling-down (μPD) method-grown Ce:LiCAF using a prismatic cell-type configuration. By uniformly illuminating four sides of a 2-mm-diameter and 30-mm-length Brewster-cut, nearly as-grown crystal, the risk of damage is dramatically reduced. Without using a chirp pulse amplifier scheme, UV femtosecond pulse at 290 nm is amplified 4 times with no significant increase to its pulse duration and B-integral. Our results show that a laser-quality, Ce:LiCAF crystal, efficiently grown by the μPD method and pumped in a prismatic-cell type configuration paves new possibilities in providing high energy UV femtosecond pulses.
- 2009-12-25
著者
-
Saito Fumio
Institute For Advanced Materials Processing Tohoku University
-
Yoshikawa Akira
Institute For Materials Research
-
Fukuda Kentaro
Tokuyama Corporation
-
Suyama Toshihisa
Tokuyama Corporation, Chiyoda, Tokyo 100-8983, Japan
-
Sarukura Nobuhiko
Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan
-
Gabayno Jacque
National Institute of Physics, University of the Philippines, Diliman 1101, Quezon City, Philippines
-
Estacio Elmer
Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan
-
Estacio Elmer
Osaka University, Institute of Laser Engineering, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan
-
Kim Kyoung
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai 980-8577, Japan
-
Cadatal-Raduban Marilou
Osaka University, Institute of Laser Engineering, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan
-
Pham Minh
Osaka University, Institute of Laser Engineering, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan
-
Yamanoi Kohei
Osaka University, Institute of Laser Engineering, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan
-
Garcia Wilson
National Institute of Physics, University of the Philippines, Diliman 1101, Quezon City, Philippines
-
Nakazato Tomoharu
Osaka University, Institute of Laser Engineering, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan
-
Shimizu Toshihiko
Osaka University, Institute of Laser Engineering, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan
-
Kim Kyoung
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan
-
Sarukura Nobuhiko
Osaka University, Institute of Laser Engineering, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan
関連論文
- Growth of Al_2O_3/Y_3Al_5O_ Eutectic Fiber by Micro-Pulling-Down Method and Its High-Temperature Strength and Thermal Stability
- Simulation of Mass Flow Rate of Particles Discharged from Hopper by Particle Element Method
- Texture Control and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG/ZrO_2 Eutectic Composite Rods
- Microstructure and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG/ZrO_2 Eutectic Composite
- Hardness and Oxidation Resistance of Perovskite-type Solid Solution of the ScRh_3B-ScRh_3C System
- Optical Studies on Paired Au^- Ions in KCl
- Paired Ag^- Ions in Potassium Chloride
- Experimental Study on Paired Ag^- Ions in KCl
- Absorption Spectra of Au^- Ions in Alkali Halides
- Zeeman Effect of the A Absorption Bands in Tl- and Pb-Doped Alkali Halides
- Boron-Carbon Atomic Ratio Dependence on the Hardness and Oxidation Resistance of Solid Solutions of Perovskite-Type Borocarbide YRh_3B_xC_ (O ≦ x ≦ 1)
- R-Dependency of the Hardness Of Perovskite-Type RRh_3B Compounds (R = La, Gd, Lu and Sc) : Structure and Mechanical and Thermal Properties of Condensed Matter
- Solid Solution Range of Boron, Microhardness and Magnetic Properties of the Perovskite-Type GdRh_3B Obtained by Arc-melting Synthesis
- Relation between mechanochemical dechlorination rate of polyvinyl chloride and mill power consumption
- Mechanochemical dechlorination of polyvinyl chloride with calcium sulfates
- Reduction of Indium(III) Oxide to Indium through Mechanochemical Route
- Preparation of GaN Powder by Mechanochemical Treatment of Gallium under Ammonia Gas Environment
- Study on dry grinding of gibbsite (hydrargillite)
- Structural change of kaolinite and pyrophyllite induced by dry grinding
- Metal Recovery and Dechlorination of an Evaporation Tape by Means of Mechanochemical Treatment
- Studies on Meniscus and Diameter Stability during the Growth of Fiber Crystals by the Micro-Pulling-Down Method
- Grinding of talc particulates by a high-speed rotor mixer
- Mechanochemical Synthesis of Fluorine-Doped SrTiO_3 and Its Photo-oxidation Properties
- Preparation of Visible Light-Activated Titania Photocatalyst by Mechanochemical Method
- EFFECT OF IRON POWDER ON COPPER EXTRACTION BY ACID LEACHING OF CHALCOPYRITE CONCENTRATE
- EFFECTS OF GRINDING AND HEMATITE ADDITION ON ACID LEACHING OF CHALCOPYRITE CONCENTRATE
- Development and Performance Test of Picosecond Pulse X-ray Excited Streak Camera System for Scintillator Characterization
- Synthesis of Niobium Carbides from Ferroniobium by Mechanochemical Method
- Differential Thermal Analysis of Assimilation and Melt-formation Phenomena in the Sintering Process of Iron Ores
- Effects of Grinding and Addition of Hematite on Acid Leaching of Chalcopyrite Concentrate by HCI Solution
- Effects of Grinding and Addition of lron Powder on Acid Leaching of Chalcopyrite Concentrate by HCI Solution
- Mechanochemical Synthesis of Hydroxyapatite from Constituent Power Mixtures by Dry Grinding
- Isolation and characterization of cysteine protease from sea urchin eggs(Biochemistry)Proceedings of the Seventy-First Annual Meeting of the Zoological Society of Japan
- Rate of Methane-steam Reforming Reaction on the Surface of Molten BF Slag-for Heat Racovery from Molten Slag by Using a Chemical Reaction-
- Annealing Effect in Terbium-Scandium-Aluminum Garnet Single Crystal
- Effect of Mechanical Milling on Carbothermic Reduction of Magnesia
- Zeeman Effect of the Exciton Bands of CuCl-CuBr Solid Solutions
- Radicals in the Mechanochemical Dechlorination of Hazardous Organochlorine Compounds Using CaO Nanoparticles
- Non-thermal Process for Extraction of Rare Earth Merals from Bastnaesite by Means of Mechanochemical Treatment
- Estimation of Extraction Rate of Yttrium from Fluorescent Powder by Ball Milling
- Estimation of Size Reduction Rate of Gibbsite in Tumbling Mills with Different Diameters by Computer Simulation
- Correlation of Size Reduction Rate of Inorganic Materials with Impact Energy of Balls in Planetary Ball Milling
- Sulphidization of Metal Oxides by Means of Mechanochemical Solid Reaction
- GRINDING OF EP DUST AND ITS EFFECT ON SOLUBILITY OF METAL COMPOUNDS IN WATER
- EFFECT OF DRY MIXED GRINDING OF TALC, KAOLINITE AND GIBBSITE ON PREPARATION OF CORDIERITE CERAMICS
- Design Proposal of Light Emitting Diode in Vacuum Ultraviolet Based on Perovskite-Like Fluoride Crystals
- Growth of Shape-Controlled Ca3NbGa3Si2O14 and Sr3NbGa3Si2O14 Single Crystals by Micro-Pulling-Down Method and Their Physical Properties
- Absence of Host Cation Segregation in the (Gd,Y)3Al5O12 Mixed Garnet Optical Ceramics
- Effects of Dry Grinding of Powder Mixture on Formation of Forsterite in Sintered Body and Its Mechanical Properties
- EFFECTS OF GRINDING ON FORMATION OF MULLITE IN A SINTERED BODY AND ITS MECHANICAL AND THERMAL PROPERTIES
- Effects of Dry Grinding of Powder Mixture on Formation of Cordierite in Sintered Body and Its Mechanical Properties
- Analysis of Granules Behavior in Continuous Drum Mixer by DEM
- Numerical Simulation Model for Granulation Kinetics of Iron Ores
- Mechanochemical Synthesis of Nano-sized Complex Fluorides from Pair of Different Constituent Fluoride Compounds
- Room temperature acid extraction of Co from LiCo_Ni_O_2 scrap by a mechanochemical treatment
- Decomposition of Polytetrafluoroethylene by Grinding with Strontium Oxide
- Effect of Mixed-grinding on Reduction Process of Carbonaceous Material and Iron Oxide Composite
- Analysis of abrasion mechanism of grinding media in a planetary mill with DEM simulation
- A method for simulating the three-dimensional motion of balls under the presence of a powder sample in a tumbling ball mill
- MECHANOCHEMICAL DECHLORINATION OF PVC
- Correlation of Ball Impact Energy with Yield of Soluble Vanadium Compound Produced in EP Dust by Dry Mechanochemical Treatment
- Zeolite Synthesis from Fly Ash : Current Processes and their Benefits and Drawbacks
- Correlation between the Grinding Rate Constant and the Impact Energy of Beads during Wet Bead Milling
- Effect of the friction coefficient in the discrete element method simulation on media motion in a wet bead mill
- Application of the DEM in Simulation of the Media Motion in a Wet Bead Mill
- Influence of polymer impurity on the mechanochemical dechlorination reaction of polyvinyl chloride
- Dechlorination of polyvinyl chloride by its grinding with KOH and NaOH
- Mechanochemical dechlorination of polyvinyl chloride by co-grinding with various metal oxides
- Reduction in α - Transformation Temperature of Gibbsite and Boehmite by Powder Mixing with Seed
- Effect of additives on dechlorination of PVC by mechanochemical treatment
- Ball mill simulation and powder characteristics of ground talc in various types of mill
- Amorphization of kaolinite and media motion in grinding by a double rotating cylinders mill-a comparison with a tumbling ball mill
- Simulation of Operational Power of Co-Axial Double Rotating Cylinders Mill by Particle Element Method
- EFFECT OF MIXED DRINDING OF POWDERS ON SUPERCONDUCTING PROPERTIES OF YBa_2 Cu_3 O_ CERAMICS
- Decomposition of Trichlorobenzene Isomers by Co-Grinding with CaO
- Mechanochemical Syntheses of Perovskite KM^F_3 with Cubic Structure (M^=Mg, Ca, Mn, Fe, Co, Ni, and Zn)
- Sonochemical Recovery of Metals from Recording Media
- Mechanochemical Synthesis of Ternary Fluorides with Perovskite Structures
- Room temperature Extrac8tion of Co and Li from LiCoO_2 followed by Mechanochemical Treatment
- Synthesis of Titanosilicate Zeolite from Bulk Titania via Mechanochemical Route
- EFFECT OF WATER CONTENT ON GRINDABILITY OF DOLOMITE AND ITS STRUCTURAL CHANGE
- Syntheses of Zeolite-A and X from Kaolinite Activated by Mechanochemical Treatment
- Discharge properties of Mg_2Ni-Ni alloy synthesized by mechanical alloying
- Mechanochemical solid-phase reactions between alkaline earth metal sulfates and alkali metal hydroxides
- Thermal and Optical Properties of Yb3+-Doped Y2O3 Single Crystal Grown by the Micro-Pulling-Down Method
- Development of Vacuum Ultraviolet Streak Camera System for the Evaluation of Vacuum Ultraviolet Emitting Materials
- Growth and Luminescence Properties of Pr-doped Lu3(Ga,Al)5O12 Single Crystals
- Formation of Mg_2Ni from Mg and Ni Powder Mixtures by the Use of a Planetary Ball Mill
- Laser Quality Ce3+:LiCaAlF6 Grown by Micro-Pulling-Down Method
- Amplification of Ultraviolet Femtosecond Pulse by a Micro-Pulling Down Method-Grown Ce:LiCAF Crystal in a Prismatic Cell-Type, Side-Pumping Configuration
- Crystal Growth and Luminescence Properties of Pr-Doped LiYF4 and LiCaAlF6
- Optical Characteristic Improvement of Neodymium-Doped Lanthanum Fluoride Thin Films Grown by Pulsed Laser Deposition for Vacuum Ultraviolet Application
- Filterless Ultraviolet Detector Based on Cerium Fluoride Thin Film Grown by Pulsed Laser Deposition
- Single Crystal Growth and Characterizations of A_3BC_3D_2O_-Type Compounds for Piezoelectric Applications
- Band-Structure Design of Fluoride Complex Materials for Deep-Ultraviolet Light-Emitting Diodes
- Ammonothermal Epitaxy of Thick GaN Film Using NH4Cl Mineralizer
- Fast and High-Energy-Resolution Oxide Scintillator : Ce-Doped (La,Gd)_2Si_2O_7
- Growth and Characterization of Yb3+-doped (Lu,Y)AlO3 Fiber Single Crystals Grown by the Micro-Pulling-Down Method
- Effects of Initial Particle Size and Wet and Dry Grinding on Mullite Formation in Sintered Bodies.
- Laser Quality Ce3+:LiCaAlF6 Grown by Micro-Pulling-Down Method