Development of Vacuum Ultraviolet Streak Camera System for the Evaluation of Vacuum Ultraviolet Emitting Materials

スポンサーリンク

概要

• 論文の詳細を見る

• Details of the design and development of a bright vacuum ultraviolet Seya–Namioka type spectrometer and streak camera system with reflection-type input optics is presented. The Seya–Namioka spectrometer has a 40 mm by 45 mm holographic grating with a groove density of 600 grooves/mm, linear dispersion of 8 nm/mm, and effective $F$-number of 4.2. To eliminate loss of light by absorption, the streak camera imaging unit uses Al and MgF2 coated imaging optics with at least 80% reflection from 125–850 nm and has an effective $F$-number of 4. It is equipped with a synchronized scan unit that can be tuned to 82 MHz and a slow scan speed unit that can measure up to 2-MHz single event. Temporal response of the system at the 20-ns scanning range is evaluated to be around 260 ps.

• 2009-09-25

著者

• CADATAL Marilou

  Institute of Laser Engineering, Osaka University

• Pham Minh

  Institute Of Laser Engineering Osaka University

• SARUKURA Nobuhiko

  Institute for Molecular Science

• Saito Fumio

  Institute For Advanced Materials Processing Tohoku University

• Furukawa Yusuke

  Institute For Protein Research Osaka University

• Yoshikawa Akira

  Institute For Materials Research

• Estacio Elmer

  Institute Of Laser Engineering Osaka University

• Fukuda Kentaro

  Tokuyama Corporation

• UCHIYAMA Koro

  Hamamatsu Photonics Cooperation

• KITANO Ken

  Vacuum and Optical Instruments

• Yanagida Takayuki

  Institute Of Multidisciplinary Research For Advanced Materials Tohoku University

• Shimizu Toshihiko

  Institute Of Laser Engineering Osaka University

• Yamanoi Kohei

  Institute Of Laser Engineering Osaka University

• Nakazato Tomoharu

  Institute Of Laser Engineering Osaka University

• Yokota Yuui

  Institute For Materials Research Tohoku University

• Kitano Ken

  Vacuum and Optical Instruments, 2-18-18 Shimomaruko, Ota, Tokyo 146-0092, Japan

• Takatori Satoru

  Institute of Laser Engineering, Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan

• Ando Kozo

  Vacuum and Optical Instruments, 2-18-18 Shimomaruko, Ota, Tokyo 146-0092, Japan

• Isobe Yoshio

  Hamamatsu Photonics K.K., 812 Joko-cho, Higashi-ku, Hamamatsu 431-3196, Japan

• Suyama Toshihisa

  Tokuyama Corporation, Shibuya 3-chome, Shibuya, Tokyo 150-8383, Japan

• Suyama Toshihisa

  Tokuyama Corporation, Chiyoda, Tokyo 100-8983, Japan

• Furukawa Yusuke

  Institute of Laser Engineering, Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan

• Estacio Elmer

  Institute of Laser Engineering, Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan

• Yamanoi Kohei

  Institute of Laser Engineering, Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan

• Shimizu Toshihiko

  Institute of Laser Engineering, Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan

• Nakazato Tomoharu

  Institute of Laser Engineering, Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan

• Saito Fumio

  Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan

• Pham Minh

  Institute for Molecular Science, Okazaki, Aichi 444-8585, Japan

• Pham Minh

  Institute of Laser Engineering, Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan

• Cadatal Marilou

  Institute of Laser Engineering, Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan

• Cadatal Marilou

  Institute for Molecular Science (IMS), Myodaiji, Okazaki, Aichi 444-8585, Japan

• Yoshikawa Akira

  Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan

関連論文

• VUV発光材料探索と真空紫外ストリークカメラによる分光
• Simulation of Mass Flow Rate of Particles Discharged from Hopper by Particle Element Method
• Ce^-Doped LiCaAlF_6 Crystals as a Solid-State Ultraviolet Saturable Absorber and Role of Excited State Absorption
• Mode-locking Stability Adjustment of a Kerr-lens Mode-locked Ti : sapphire Laser, Analyzed by a Recently Developed Real-time Spectrum Analyzer
• 0.43 J, 10 Hz Fourth Harmonic Generation of Nd:YAG Laser Using Large Li2B407 Crystals : Optics and Quantum Electronics
• Far-Infrared Absorption Measurements of Polypeptides and Cytochrome c by THz Radiation
• Relation between mechanochemical dechlorination rate of polyvinyl chloride and mill power consumption
• Mechanochemical dechlorination of polyvinyl chloride with calcium sulfates
• Reduction of Indium(III) Oxide to Indium through Mechanochemical Route
• Preparation of GaN Powder by Mechanochemical Treatment of Gallium under Ammonia Gas Environment
• Study on dry grinding of gibbsite (hydrargillite)
• Structural change of kaolinite and pyrophyllite induced by dry grinding
• Tunable Ultraviolet Short-Pulse Generation from a Ce:LiCAF Laser Amplifier System and Its Sum-Frequency Mixing with an Nd:YAG Laser
• All-solid-state tunable ultraviolet picosecond Ce : LuLiF_4 laser
• Tunable Ultraviolet Short-Pulse Generation from a Ce : LiCAF master oscillator and power amplifier system
• Subnanosecond Tunable Ultraviolet Pulse Generation from a Low-Q, Short-Cavity Ce:LiCAF Laser
• Generation of THz Radiation from Resonant Absorption in Strained Multiple Quantum Wells in a Magnetic Field : Optics and Quantum Electronics
• Efficient Terahertz Radiation Generation from a Bulk InAs Mirror as an Intracavity Terahertz Radiation Emitter
• THz Radiation from Intracavity Saturable Bragg Reflector in Magnetic Field with Self-Started Mode-Locking by Strained Saturable Bragg Reflector
• High Average Power Mode Locked Ti:Sapphire Laser with Intracavity Continuous-Wave Amplifier and Strained Saturable Bragg Reflector
• Metal Recovery and Dechlorination of an Evaporation Tape by Means of Mechanochemical Treatment
• THz-radiation Generation from an Intracavity Saturable Bragg Reflector in a Magnetic Field
• High-Pulse-Energy Ultraviolet Ce^ : LiCaAIF_6 Laser Oscillator with Newly Designed Pumping Schemes
• High-Pulse-Energy, All-Solid-State, Ultraviolet Laser Oscillator Using Large Czochralski-Grown Ce:LiCAF Crystal
• Grinding of talc particulates by a high-speed rotor mixer
• Mechanochemical Synthesis of Fluorine-Doped SrTiO_3 and Its Photo-oxidation Properties
• Preparation of Visible Light-Activated Titania Photocatalyst by Mechanochemical Method
• Magnetic-Field-Induced Enhancement of THz-Radiation Power from Femtosecond-Laser-Irradiated InAs up 27T
• EFFECT OF IRON POWDER ON COPPER EXTRACTION BY ACID LEACHING OF CHALCOPYRITE CONCENTRATE
• EFFECTS OF GRINDING AND HEMATITE ADDITION ON ACID LEACHING OF CHALCOPYRITE CONCENTRATE
• Synthesis of Niobium Carbides from Ferroniobium by Mechanochemical Method
• Identification of Potential Estrogenic Environmental Pollutants by Terahertz Transmission Spectroscopy
• Differential Thermal Analysis of Assimilation and Melt-formation Phenomena in the Sintering Process of Iron Ores
• Effects of Grinding and Addition of Hematite on Acid Leaching of Chalcopyrite Concentrate by HCI Solution
• Effects of Grinding and Addition of lron Powder on Acid Leaching of Chalcopyrite Concentrate by HCI Solution
• Mechanochemical Synthesis of Hydroxyapatite from Constituent Power Mixtures by Dry Grinding
• Rate of Methane-steam Reforming Reaction on the Surface of Molten BF Slag-for Heat Racovery from Molten Slag by Using a Chemical Reaction-
• Design Proposal of Light Emitting Diode in Vacuum Ultraviolet Based on Perovskite-Like Fluoride Crystals
• Physical Origin of Magnetically Induced Periodic Structure Observed in Terahertz Radiation Spectrum Emitted from InAs
• Teflon Photonic Crystal Fiber as Terahertz Waveguide
• Optical Property of Ce^3+-ion-doped LiCaAlF_6 Crystal in Vacuum Ultraviolet Region
• Simultaneous Measurement of Thickness and Water Content of Thin Black Ink Films for the Printing Using THz Radiation : Optics and Quantum Electronics
• THz-Radiation Emitter and Receiver System Based on a 2 T Permanent Magnet, 1040 nm Compact Fiber Laser and Pyroelectric Thermal Receiver : Optics and Quantum
• Enhanced THz Radiation from Femtosecond Laser Pulse Irradiated InAs Clean Surface
• Growth and Characterization of KMgF_3 Single Crystals by the Czochralski Technique under CF_4 Atmosphere
• Direct Generation of 27/mj,309-nm Pulses from a Cu^:LiLuF_4 Oscillator Using a Large-Size Ce^:LiLuF_4 Crystal
• High average power THz-radiation from femtosecond laser irradiated InAs under the magnetic field
• Effect of Mechanical Milling on Carbothermic Reduction of Magnesia
• Radicals in the Mechanochemical Dechlorination of Hazardous Organochlorine Compounds Using CaO Nanoparticles
• Non-thermal Process for Extraction of Rare Earth Merals from Bastnaesite by Means of Mechanochemical Treatment
• Estimation of Extraction Rate of Yttrium from Fluorescent Powder by Ball Milling
• Estimation of Size Reduction Rate of Gibbsite in Tumbling Mills with Different Diameters by Computer Simulation
• Correlation of Size Reduction Rate of Inorganic Materials with Impact Energy of Balls in Planetary Ball Milling
• Sulphidization of Metal Oxides by Means of Mechanochemical Solid Reaction
• GRINDING OF EP DUST AND ITS EFFECT ON SOLUBILITY OF METAL COMPOUNDS IN WATER
• EFFECT OF DRY MIXED GRINDING OF TALC, KAOLINITE AND GIBBSITE ON PREPARATION OF CORDIERITE CERAMICS
• Reduction of Nonlinear Absorption in Li2B4O7 by Temperature- and Repetition Rate-Control
• Design Proposal of Light Emitting Diode in Vacuum Ultraviolet Based on Perovskite-Like Fluoride Crystals
• Physical Origin of Magnetically Induced Periodic Structure Observed in Terahertz Radiation Spectrum Emitted from InAs
• Teflon Photonic Crystal Fiber as Terahertz Waveguide
• Identification of Potential Estrogenic Environmental Pollutants by Terahertz Transmission Spectroscopy
• Nd3+:(La1-xBax)F3-x Grown by Micro-Pulling Down Method as Vacuum Ultraviolet Scintillator and Potential Laser Material
• Effects of Pulse Rate and Temperature on Nonlinear Absorption of Pulsed 262-nm Laser Light in $\beta$-BaB2O4
• Effects of Dry Grinding of Powder Mixture on Formation of Forsterite in Sintered Body and Its Mechanical Properties
• EFFECTS OF GRINDING ON FORMATION OF MULLITE IN A SINTERED BODY AND ITS MECHANICAL AND THERMAL PROPERTIES
• Effects of Dry Grinding of Powder Mixture on Formation of Cordierite in Sintered Body and Its Mechanical Properties
• Analysis of Granules Behavior in Continuous Drum Mixer by DEM
• Numerical Simulation Model for Granulation Kinetics of Iron Ores
• Mechanochemical Synthesis of Nano-sized Complex Fluorides from Pair of Different Constituent Fluoride Compounds
• Room temperature acid extraction of Co from LiCo_Ni_O_2 scrap by a mechanochemical treatment
• Decomposition of Polytetrafluoroethylene by Grinding with Strontium Oxide
• Effect of Mixed-grinding on Reduction Process of Carbonaceous Material and Iron Oxide Composite
• Analysis of abrasion mechanism of grinding media in a planetary mill with DEM simulation
• A method for simulating the three-dimensional motion of balls under the presence of a powder sample in a tumbling ball mill
• MECHANOCHEMICAL DECHLORINATION OF PVC
• Correlation of Ball Impact Energy with Yield of Soluble Vanadium Compound Produced in EP Dust by Dry Mechanochemical Treatment
• Zeolite Synthesis from Fly Ash : Current Processes and their Benefits and Drawbacks
• Correlation between the Grinding Rate Constant and the Impact Energy of Beads during Wet Bead Milling
• Effect of the friction coefficient in the discrete element method simulation on media motion in a wet bead mill
• Application of the DEM in Simulation of the Media Motion in a Wet Bead Mill
• Influence of polymer impurity on the mechanochemical dechlorination reaction of polyvinyl chloride
• Dechlorination of polyvinyl chloride by its grinding with KOH and NaOH
• Mechanochemical dechlorination of polyvinyl chloride by co-grinding with various metal oxides
• Reduction in α - Transformation Temperature of Gibbsite and Boehmite by Powder Mixing with Seed
• Effect of additives on dechlorination of PVC by mechanochemical treatment
• Response Time-Shortened Zinc Oxide Scintillator for Accurate Single-Shot Synchronization of Extreme Ultraviolet Free-Electron Laser and Short-Pulse Laser
• Fast-response, low-afterglow 4,4'''-bis〔(2-butyloctyl)oxy〕-1,1':4',1":4",1'''-quarterphenyl dye-based liquid scintillator for high-contrast detection of laser fusion-generated neutrons
• Development of Vacuum Ultraviolet Streak Camera System for the Evaluation of Vacuum Ultraviolet Emitting Materials
• Evaluation of Soft X-ray Laser with In situ Imaging Device of High Spatial Resolution ZnO Scintillator
• Laser Quality Ce3+:LiCaAlF6 Grown by Micro-Pulling-Down Method
• Optical Characteristic Improvement of Neodymium-Doped Lanthanum Fluoride Thin Films Grown by Pulsed Laser Deposition for Vacuum Ultraviolet Application
• Ce3+-Doped LiCaAlF6 Crystals as a Solid-State Ultraviolet Saturable Absorber and Role of Excited State Absorption
• Band-Structure Design of Fluoride Complex Materials for Deep-Ultraviolet Light-Emitting Diodes
• Systematic Study on Ce:LuLiF4 as a Fast Scintillator Using Storage Ring Free-Electron Lasers
• Magnetic-Field-Induced Enhancement of THz-Radiation Power from Femtosecond-Laser-Irradiated InAs up to 27 T
• Time-Resolved Pump and Probe Experiment for Wide-Gap Semiconductors Using Free Electron Laser and Synchronously-Operated Femtosecond Laser
• Mode-locking Stability Adjustment of a Kerr-lens Mode-locked Ti:sapphire Laser, Analyzed by a Recently Developed Real-time Spectrum Analyzer
• Terahertz-Radiation Photoconductive Antenna in Sputtered Zinc Oxide Thin Film
• Vacuum Ultraviolet Fluorescence Spectroscopy of Nd^:LaF_3 Using Femtosecond Extreme Ultraviolet Free Electron Laser
• Laser Quality Ce3+:LiCaAlF6 Grown by Micro-Pulling-Down Method

もっと見る 閉じる

スポンサーリンク