Improvement of Sinter Productivity by Adding Return Fine on Raw Materials after Granulation Stage
スポンサーリンク
概要
- 論文の詳細を見る
In order to increase the permeability of the sintering bed for sinter ore productivity, RF-MEBIOS (Return Fine - Mosaic Embedding Iron Ore Sintering) process, in which return fine as dry particle is added on granulated raw materials and then they are charged into sintering machine, is proposed. In RF-MEBIOS, it is demonstrated by pot tests that productivity increases at the same moisture content in sinter mixture at charging. This productivity increase is caused by higher permeability in sinter packed bed due to two major phenomena. One is increasing the pseudo-particle size at granulation and the other is decreasing the bulk density of sinter packed bed after charging. The former is achieved by a higher moisture content in the raw materials at granulation, which has the role of decreasing small size of pseudo-particle (–0.25 mm). The latter is achieved by higher friction in the packed bed composed of dry and wet particles compound, which has a role of decreasing bulk density. In the development of RF-MEBIOS, return fine was chosen as the dry particle because it is dry when produced by the sintering machine. The sinter productivity increases with the increase of the quantity of the return fine added after granulation stage. The effect of pseudo-particle (–0.25 mm) ratio and ε on flame front speed were evaluated as 55% and 41% to increase of frame front speed, respectively.Effect of RF-MEBIOS on sinter productivity is confirmed in No.3 sinter plant in Kashima Steel Works. Under the condition of constant moisture content in sinter mixture at charging, this improvement degree is proportioning to the ratio of bypass return fine which is added to granulated the other sinter materials without granulation. It means granulation at higher moisture has superiority compared to increase of fine material in bypass return fine.Finally, RF-MEBIOS method is installed on three commercial sintering machines (Kashima, Wakayama, and Kokura) belonging Sumitomo Metals. In all three sinter plants, productivity increase has been confirmed. Therefore, introducing RF-MEBIOS has been demonstrated to cause a universal improvement of sinter productivity.
著者
-
Hara Masaki
Corporate R&d Sumitomo Metal Industries Ltd.
-
Kamijo Chikashi
Corporate R&d Sumitomo Metal Industries Ltd.
-
Kawaguchi Takazo
Corporate R&d Laboratories Sumitomo Metal Industries Ltd.
-
Matsumura Masaru
Corporate R&D Laboratories, Sumitomo Metal Industries, Ltd.
-
Yamaguchi Yasuhide
Corporate R&D Laboratories, Sumitomo Metal Industries, Ltd.
-
Nakagawa Youichi
Kashima Steel Works, Sumitomo Metal Industries, Ltd.
-
Kamijo Chikashi
Corporate R&D Laboratories, Sumitomo Metal Industries, Ltd.
関連論文
- Analysis of Raw Material Flow with Axial Direction in Continuous Drum Mixer for Sintering Process
- Properties of Core Ore in Quasi-particle Required for Large Amounts Usage of Limonitic Ores in Iron Ore Sintering Process
- Carbothermic Reduction in the Combustion Bed Packed with Composite Pelles of Iron Oxide and Coal
- Analysis of Granules Behavior in Continuous Drum Mixer by DEM
- Numerical Simulation Model for Granulation Kinetics of Iron Ores
- Development of a 3-D Sinter Process Mathematical Simulation Model
- Influence of Properties of Fluxing Materials on the Flow of Melt Formed in the Sintering Process
- Improvement of Sinter Softening Property and Reducibility by Controlling Chemical Compositions
- Production of Carbon Included Sinter and Evaluation of Its Reactivity in a Blast Furnace Environment
- Sintering Behavior of Raw Material Bed Placing Large Particles
- Summarized Achievements of the Porous Meso-mosaic Texture Sinter Research Project
- Improvement of Sinter Productivity by Adding Return Fine on Raw Materials after Granulation Stage