Comparison of Different Encapsulating Adhesives to Enhance the Efficiencies and Lifetimes of Polymeric Solar Cells
スポンサーリンク
概要
- 論文の詳細を見る
Polymeric solar cells (PSCs) with a derivative of C60 [[6,6]-phenyl C61-butyric acid methyl ester (PCBM)], and 3-hexylthiophene (P3HT) as active layers have been fabricated. The PSC devices were also packaged with glass and novel UV glues to improve their lifetimes and power conversion efficiencies (PCEs). After encapsulation with UV glue I, II, and III, the PCEs of PSCs reached 4, 4.82, and 6%, respectively, and their half-lifetimes increased to 16–18, 26–28, and 90 h, respectively, while the PCEs and half-lifetimes of PSCs without encapsulation were 3.76% and 2.5 h, respectively.
- 2009-04-25
著者
-
Tsai Yu
Institute Of Electro-optical And Materials Science National Formosa Univ.
-
Juang Fuh-shyang
Institute Of Electro-optical And Materials Science National Formosa University
-
Hsieh Tsung-eong
Department Of Materials Science And Engineering National Chiao Tung University
-
Chung Ming-Hua
Department of Material Science and Engineering, National Chiao Tung University, Hsinchu 30010, Taiwan
-
Liu Mark
Material and Chemical Research Laboratories, Industrial Technology Research Institute, Hsinchu 300, Taiwan
-
Tsai Yu
Institute of Electro-Optical and Materials Science, National Formosa University, Huwei, Yunlin 63208, Taiwan
-
Chu Wei-Ping
Institute of Electro-Optical and Materials Science, National Formosa University, Huwei, Yunlin 63208, Taiwan
-
Chen Chen-Ming
Department of Material Science and Engineering, National Chiao Tung University, Hsinchu 30010, Taiwan
-
Tang Rong-Ming
Institute of Electro-Optical and Materials Science, National Formosa University, Huwei, Yunlin 63208, Taiwan
-
Hsieh Tsung-Eong
Department of Material Science and Engineering, National Chiao Tung University, Hsinchu 300, Taiwan
-
Juang Fuh-Shyang
Institute of Electo-optical and Materials Science, National Formosa University, 64 Wunhua Road, Huwei, Yunlin 632-08, Taiwan
-
Juang Fuh-Shyang
Institute of Electro-Optical and Materials Science, National Formosa University, Huwei, Yunlin 63208, Taiwan
関連論文
- Effects of Doped-Zone Location on the CIE Value of Flexible White Organic Light Emitting Diodes
- Separately Doped Structures for Red Organic Light Emitting Diodes
- Enhancement of Data Transfer Rate of Phase Change Optical Disk by Doping Nitrogen in Ge-In-Sb-Te Recording Layer
- Transparent barrier coatings for flexible organic light-emitting diode applications
- Top emission organic light emitting diodes with double metal layer anode
- The Improvement of Luminance Efficiency by the Insertion of Buffer layers in Flexible Organic Light-Emitting Diodes
- Efficiency Improvement of Organic Solar Cells by Annealing for Active Layer
- Nonspherical LED Packaging Lens for Uniformity Improvement
- Co-doping in Spin-coated Hole Transport Layer for Flexible Organic Light Emitting Diodes
- Power Efficiency Improvement of White Phosphorescent Organic Light-Emitting Diode with Thin Double-Emitting Layers and Hole-Trapping Mechanism
- Phase-Change Kinetics of Bi--Fe--(N) Layer for High-Speed Write-Once Optical Recording
- Sintering Behavior, Microstructure, and Dielectric Properties of Nano-Ba0.7Sr0.3TiO3 Ceramics
- Enhancement of Luminance Yield of Blue Organic Light-Emitting Diode
- Enhancement of luminance yield of blue light organic light emitting diode
- Efficiency Improvement of Organic Solar Cells by Slow Growth and Changing Spin-Coating Parameters for Active Layers
- Practical Issues for Two-Light-Sources Model of Phosphor-Based White Light-Emitting Diode
- Phase Transition Kinetics and Recording Characteristics of Nanocomposite Layers Prepared by Sputtering Process Utilizing AgInSbTe–SiO2 Composite Target
- The Nanocomposite Thin Film Applied to High-Density Write-Once Optical Data Storage
- Simulation for double ultra-thin separately doped red organic light-emitting diode
- Electroless Copper/Nickel Films Deposited on AlN Substrates
- Top Emission Organic Light-Emitting Diodes with Double-Metal-Layer Anode
- Top-Emission Inverted Organic Light Emitting Diode Using Aluminum Nitride as Buffer Layer
- Comparison of Different Encapsulating Adhesives to Enhance the Efficiencies and Lifetimes of Polymeric Solar Cells
- InAlAs/InGaAs Metamorphic High Electron Mobility Transistor with Cu/Pt/Ti Gate and Cu Airbridges
- Optical Disk Mastering Using Optical Superresolution Technique
- Improvement in Luminance Efficiency by Insertion of Buffer Layers in Flexible Organic Light-Emitting Diodes
- Effects of Transparent Conductive Layers on Characteristics of InGaN-Based Green Resonant-Cavity Light-Emitting Diodes
- Efficiency Enhancement of Top Emission Organic Light-Emitting Diodes with Ni/Au Periodic Anode
- Simulation for Double Ultrathin Separately Doped Red Organic Light-Emitting Diode
- Lifetime Improvement of Organic Light Emitting Diodes using LiF Thin Film and UV Glue Encapsulation
- Enhancing the Overwriting Characteristics of Phase-Change Optical Disks by Doping in Dielectric Layers
- Effects of Thickness of Organic and Multilayer Anode on Luminance Efficiency in Top-Emission Organic Light Emitting Diodes
- Superresolution Structure Optical Disk with Semiconductor-Doped Glass Mask Layer Containing CdSe Nanoparticles
- Efficient Solution-Processed Green Phosphorescent Organic Light-Emitting Diodes Using Bipolar Host Material
- Separately Doped Structures for Red Organic Light-Emitting Diodes
- Efficient Solution-Processed Green Phosphorescent Organic Light-Emitting Diodes Using Bipolar Host Material (Special Issue : Solid State Devices and Materials)