An Ultrasonic Suction Pump with No Physically Moving Parts
スポンサーリンク
概要
- 論文の詳細を見る
A new ultrasonic suction pump is described in this paper. The pump uses the suction force of a rigid cylinder tube vibrating at an ultrasonic frequency and has no physically moving parts. The pump consists of a longitudinal bolt-clamped Langevin transducer (BLT) combined with a stepped horn working at a resonance frequency of 24 kHz. A glass tube with the length of the half-wavelength-resonance is glued at the tip of the horn. To enhance pump performance, we introduced a reflection plate and a thin rod installed to the end of the glass tube with a small gap. Maximum pressures of 7.2 kPa and 23.5 kPa were recorded using the reflection plate and the thin rod, respectively. In this study, we experimentally investigate the characteristics of the pump and the operating physics. The maximum pressure is a function of the vibration velocity of the end surface of the glass tube and of the gap.
- Published by the Japan Society of Applied Physics through the Institute of Pure and Applied Physicsの論文
- 2004-05-15
著者
-
HASEGAWA Takeshi
Precision and Intelligence Laboratory, Tokyo Institute of Technology
-
Yun Cheol-ho
Precision And Intelligence Laboratory Tokyo Institute Of Technology
-
Ueha Sadayuki
Precision And Intelligence Lab. Tokyo Inst. Of Technol.
-
Nakamura Kentaro
Precision And Intelligence Lab. Tokyo Inst. Of Technol.
-
Yun Cheol-Ho
Precision and Intelligence Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8053, Japan
-
Hasegawa Takeshi
Precision and Intelligence Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8053, Japan
-
Ueha Sadayuki
Precision and Intelligence Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8053, Japan
関連論文
- Characteristics of Ultrasonic Suction Pump Without Moving Parts
- An Ultrasonic Suction Pump with No Physically Moving Parts
- Holding Mechanism Using a Resonance System for a High-Power Ultrasonic Linear Motor
- Waveforms of the Vibration Velocity and the Current of a Piezoelectric Transducer in the Transient State
- An Analysis of Jumping and Dropping Phenomena of Piezoelectric Transducers using the Electrical Equivalent Circuit Constants at High Vibration Amplitude Levels
- Effects of Vibration Stress and Temperature on the Characteristics of Piezoelectric Ceramics under High Vibration Amplitude Levels Measured by Electrical Transient Responses
- A Low-Wear Driving Method of Ultrasonic Motors
- Effects of a Series Capacitor on the Energy Consumption in Piezoelectric Transducers at High Vibration Amplitude Level
- Characteristics of Ultrasonic Motors Driven in a Vacuum
- ホッピング超音波モ-タの基礎特性
- Energy Storage Characteristics of a Piezo-Generator using Impact Induced Vibration
- Efficiency Improvement of an Ultrasonic Motor Driven with Rectangular Waveform
- Analysis of the Transformation of Mechanical Impact Energy to Electric Energy Using Piezoelectric Vibrator
- Wear Properties and Life Prediction of Frictional Materials for Ultrasonic Motors
- Ultrasonic Motor Utilizing Elastic Fin Rotor : Piezoelectrics
- An estimation of vibration intensity from the measured vibration locus at one point
- Finite Element Method Aided Power Flow Mapping of an Ultrasonic Vibration Tool
- A Multi-Transducer Near Field Acoustic Levitation System for Noncontact Transportation of Large-Sized Planar Objects
- Characteristics of Underwater Near-Field Acoustic Radiation Force Acting on a Planar Object
- 外締め構造を有する大口径ボルト締めランジュバン型ねじり振動子
- Construction of Megatorque Hybrid Transducer Type Ultrasonic Motor
- A Study on the Mechanism of a Scientific Toy "Girigiri-Garigari"
- 面内振動成分を用いた振動インテンシティ計測
- Ultrasonic Transducer Array for Structural Intensity Measurements
- Two-joint robot finger design based on multi-degree-of-freedom ultrasonic motors(Commemoration of the Japan-China Joint Conference on Acoustics 2007 (JCA2007))
- A method for measuring liquid level using the flexural vibrations in a rod
- A basic design of robot finger joint using multi-degree-of-freedom ultrasonic motor
- Ultrasonic linear motor using traveling vibration on fine ceramic twin ridges
- P3-66 A robot finger joint driven by Multi-Degree-of-Freedom Ultrasonic actuator(Poster session 3)
- P3-51 A self-running ultrasonic levitated linear guide(Poster session 3)
- Improved Monitoring of Intracranial Echo-guided Surgery : Reduction of Backscattering and Recognition of the Operating Part Using Microcapsule Vibration
- A Multilayered Piezoelectric Transformer Operating in the Third Order Longitudinal Mode and Its Application for an Inverter
- Non-Contact Excitation of Vibration Piece Using YAG Laser : Photoacoustic Effect and Spectroscopy
- 3角形バイモルフ振動子を用いた振動型粘度計
- Tissue Hardness Measurement Using Ultrasonic Radiation Force : Theoretical Derivation of Tissue Hardness from the Relaxation Curve : Photoacoustic Spectroscopy and Ultrasonic Imaging
- Optical Fiber Coupler Array for Multi-Point Sound Field Measurements
- Reconstruction of Acoustic Impedance Distribution of Functionally Gradient Materials by Using Reflection Response : Ultrasonic Measurement
- Acoustic and Vibrating Properties of C/C Composite
- High-speed noncontact ultrasonic transport of small objects using acoustic traveling wave field
- Multiple-frequency ultrasonic imaging by transmitting pulsed waves of two frequencies
- Characteristics of a Bidirectional Rotary Ultrasonic Motor Using Obliquely Polarized Piezoelectric Transducers
- NONCONTACT SUSPENDING AND TRANSPORTING PLANAR OBJECTS BY USING ACOUSTIC LEVITATION
- Magnification of Transportation Range Using Not-Contact Acoustic Levitation by Connecting Vibrating Plates
- A Finite-Element Analysis of Transient Vibration of an Ultrasonic Welding Tool
- Estimation of Trabecular Bone Axis for Characterization of Cancellous Bone Using Scattered Ultrasonic Wave
- Ultrasonic Scattering Study of Cancellous Bone for Osteoporosis Diagnosis
- Optimum Operation Conditions of an Ultrasonic Motor Driving Fluid Directly
- Trial Construction of a Noncontact Ultrasonic Motor with an Ultrasonically Levitated Rotor
- Inverse Scattering of a Medium Which Supports M-Types of Wave
- Fresnel Reflection Spectra at Multimode Optical Fiber Ends with Heterodyne Detection
- Electrode design of multilayered piezoelectric transducers for longitudinal-bending ultrasonic actuators
- Electrical Equivalent Circuit of Loaded Thick Langevin Flexural Transducer
- Derivation of a Force Factor Equation for a Langevin-Type Flexural Mode Transducer
- Hybrid Transducer Type Ultrasonic Linear Motor Using Flexural Vibrator : High Power Ultrasonics
- New Airborne Ultrasonic Transducer with High Output Sound Pressure Level
- A Low-Profile Design for the Noncontact Ultrasonically Levitated Stage
- Density dependence of acoustic characteristics of silica nanofoam
- Ultrasonic Motor Operating in Longitudinal-Torsional Degenerate-Mode
- Measurement of a Specimen with a Discontinuous Elasticity Variation Using Spherical-Planar-Pair Lenses
- High-speed focus scanning by an acoustic variable-focus liquid lens (Special issue: Ultrasonic electronics)
- A Fiber Optic Vertical Coupler for the Matrix Tactile Sensor
- Improvements in controllability of ultrasonic linear motors by longitudinal-bending multilayered transducers with independent electrodes (Special issue: Ultrasonic electronics)
- Force factor design of disk vibrators used for ultrasonic motors
- Revolution Speed Characteristics of an Ultrasonic Motor Estimated from the Pressure Distribution of the Rotor : Ultrasonic Motor, Actuator and Transducer
- Sound Scattering of Plane Wave by a Transverse Isotropic Cylinder : Ultrasonic Measurement
- Cancellation of parametric-effect-induced error in airborne ultrasound Doppler velocimetry
- Measurement of the resonant characteristics of a single bubble vibration by using a laser Doppler vibrometer (Special issue: Ultrasonic electronics)
- Measurement of Acoustic Velocity in Poly(methyl methacrylate)-Based Polymer Optical Fiber for Brillouin Frequency Shift Estimation
- High-Frequency Optical Scanner Based on Bending Vibration of Optical Fiber
- Finite Element Analysis of Acoustic Streaming in an Ultrasonic Air Pump
- Support Mechanism for the Ball Rotor in the Three-Degree-of-Freedom Ultrasonic Motor
- Motor Core Fabrication through Ultrasonic Vibration Compaction of Soft Magnetic Composite
- Design of Multi-Degree-of-Freedom Ultrasonic Micromotors
- Resonant Mode Design for Noncontact Ultrasonic Motor with Levitated Rotor
- Acoustic Waveguides for Actuators
- Equivalent Circuit Analysis and Design of Multilayered Polyurea Ultrasonic Transducers
- Three-Axis Acceleration Sensor Using Polyurea Films
- Numerical Analysis of Ultrasonic Beam of Variable-Line-Focus-Beam Film Transducer
- Multilayered Transducers Using Polyurea Film
- Enhancement of Brillouin Scattering Signal in Optical Fibers by Use of Pulsed Pump Light
- Array Configurations for Higher Power Generation in Piezoelectric Energy Harvesting
- Dependence of Brillouin Frequency Shift on Temperature and Strain in Poly(methyl methacrylate)-Based Polymer Optical Fibers Estimated by Acoustic Velocity Measurement
- High-Speed Measurement of Refractive Index Using Dielectric Multilayer Films Deposited on Optical Fiber End
- Pressure Sensitivity of a Fiber-Optic Microprobe for High-Frequency Ultrasonic Field
- Noncontact Ultrasonic Transport of Liquid Using a Flexural Vibration Plate
- Improvement in the Flow Rate of a Miniature Ultrasonic Suction Pump
- Measurement of Intense Ultrasound Field in Air Using Fiber Optic Probe
- Noncontact Self-Running Ultrasonically Levitated Two-Dimensional Stage Using Flexural Standing Waves
- Demodulation of Acoustic Signals in Fiber Bragg Grating Ultrasonic Sensors Using Arrayed Waveguide Gratings
- Leveling Viscous Fluids Using Ultrasonic Waves
- The Measurement of High-Power Characteristics for a Piezoelectric Transducer Based on the Electrical Transient Response
- A High Power Ultrasonic Linear Motor Using a Longitudinal and Bending Hybrid Bolt-Clamped Langevin Type Transducer
- Characteristics of Ultrasonic Suction Pump Without Moving Parts
- Potential Applicability of Brillouin Scattering in Partially Chlorinated Polymer Optical Fibers to High-Precision Temperature Sensing
- Modeling and Performance Evaluation of an Ultrasonic Suction Pump
- Experimental Study on an Ultrasonic Purification Apparatus for Civil Engineering Use
- An Ultrasonic Suction Pump with No Physically Moving Parts
- Ultrasonic Transducer Array for Structural Intensity Measurements
- Air Flow in a Small Gap between a Bending Vibrator and a Reflector
- A basic design of robot finger joint using multi-degree-of-freedom ultrasonic motor