外締め構造を有する大口径ボルト締めランジュバン型ねじり振動子
スポンサーリンク
概要
- 論文の詳細を見る
To fabricate a bolt-clamped large diameter Langevin torsional vibrator as designed is usually difficult. A torsional vibrator tightened with an outside bolt is proposed in which the designed characteristics in the resonant vibration of the normal mode is achieved. A torsional vibrator 80 millimeters in diameter with a calculated resonant frequency of 28kHz has been fabricated. The resonant frequency of the torsional vibrator is 26.1kHz, the quality factor is 890 and the maximum angular velocity is 4.1rad/s. It is confirmed that the vibration characteristics obtained with the externally-bolted transducer are improved compared with the torsional transducer tightened with an inside bolt.
- 社団法人日本音響学会の論文
著者
-
Nakamura Kentaro
Precision And Intelligence Laboratory Tokyo Institute Of Technology
-
UEHA Sadayuki
Precision and Intelligence Laboratory, Tokyo Institute of Technology
-
Nakamura K
Department Of Electrical Engineering School Of Engineering Nagoya University
-
Nakamura K
Tokyo Inst. Of Technol. Yokohama‐shi
-
Koike Yoshikazu
Precision and Intelligence Laboratory, Tokyo Institute of Technology
-
Kihara Manabu
Precision and Intelligence Laboratory, Tokyo Institute of Technology
-
Satonobu Jun
Precision and Intelligence Laboratory, Tokyo Institute of Technology
-
里信 純
Precision and Intelligence Laboratory, Tokyo Institute of Technology
-
小池 義和
Precision and Intelligence Laboratory, Tokyo Institute of Technology
-
Satonobu J
Tokyo Inst. Technol. Yokohama Jpn
-
Kihara Manabu
Precision And Intelligence Laboratory Tokyo Institute Of Technology
-
Ueha Sadayuki
Precision And Intelligence Lab. Tokyo Inst. Of Technol.
-
Nakamura Kentaro
Precision And Intelligence Lab. Tokyo Inst. Of Technol.
-
Koike Yoshikazu
Precision And Intelligence Laboratory Tokyo Institute Of Technology
-
Satonobu Jun
Precision And Intelligence Laboratory Tokyo Institute Of Technology
-
木原 学
Precision and Intelligence Laboratory, Tokyo Institute of Technology
関連論文
- Plasma Absorption Probe for Measuring Electron Density in an Environment Soiled with Processing Plasmas
- Diagnostic of Surface Wave Plasma for Oxide Etching in Comparison with Inductive RF Plasma
- 液体媒質の非線形パラメータB/Aの自動測定
- High Carrier Mobility in Mesophase of a Dithienothiophene Derivative
- Organic Field-effect Transistors Based on Solution-processible Dibenzotetrathiafulvalene Derivatives
- (Tetrathiafulvalene)(tetracyanoquinodimethane) as a Contact Material for n-Channel and Ambipolar Organic Transistors
- Lowering Threshold by Energy Transfer between Two Dyes in Cholesteric Liquid Crystal Distributed Feedback Lasers
- Amplification of Twisting Power in Chiral Mesophase by Introducing Achiral Rod-like Compound with Ester Group
- Flexible Microcavity Organic Light-Emitting Diodes with Wide-Band Organic Distributed Bragg Reflector
- Longer-Terminal-Chain-Sensitive Phase Structures in Mixtures and Nonsymmetric Molecules of Bent-Core Mesogens
- Ideal Liquid Crystal Display Mode Using Achiral Banana-Shaped Liquid Crystals
- Syntheses and Properties of Oligothiophenes with Cyano and Hexyl Groups
- Spontaneously Buckled Microlens for Improving Outcoupled Organic Electroluminescence
- 端部への物体接近による圧電屈曲振動子特性の変化 : 近接センサのための基礎的検討
- 端部への物体接近によって生じる圧電屈曲振動子特性の変化のモデル解析
- P1-C-36 端部への物体接近による屈曲振動子特性の変化とその一考察(バルク波・表面波デバイス,ポスターセッション1(概要講演))
- 屈曲振動板端部への物体接近時に見られる振動子特性の特異現象について
- 分極反転層を有する薄いLiTaO_3回転Y板におけるSH波の温度特性
- KNbO_3結晶におけるBGS表面波の伝搬特性の測定
- 温度勾配により圧電定数を傾斜させた圧電トランスデューサの特性
- 温度勾配による圧電定数の傾斜化とその等価回路による評価
- 圧電体中に形成した温度勾配による圧電定数傾斜化の試み
- A-11-14 LoTaO_3 32°-42°回転Y板上へのZnOの膜のエピタキシャル成長
- LiNbO_3回転変位アクチュエータを用いた波長可変光フィルタ
- LiNbO_3回転変位アクチュエータを用いた波長可変光フィルタ
- Characteristics of Ultrasonic Suction Pump Without Moving Parts
- Acoustic Waveguides for Actuators
- 重み付けIDTの導波モードを考慮したCOM等価回路
- P2-4 分極反転層を形成したLiNbO_3トランスデューサの固体媒質への超音波放射特性(ポスターセッション2(概要講演))
- PMN-PTにおけるバルク波及び表面波の伝搬特性と電気機械結合係数(一般・材料)
- 圧電結晶・デバイスの研究に携わって
- KNbO_3板の圧電縦効果幅縦振動の電気機械結合係数について
- 分極反転層を形成したLiNbO_3トランスデューサの固体媒質への超音波放射特性
- A-11-3 SMR 型圧電薄膜共振子の温度特性改善
- A-11-2 ECR-PLD 法による KNbO_3 圧電薄膜の成長
- 分極反転層を有するLiNbO_3板を用いた広帯域超音波トランスデューサ
- 新しい圧電結晶KNbO_3の魅力
- ハーモニックメージング用LiNbO_3トランスデューサ
- A-11-12 KNbO_3結晶を用いたVHF帯超音波トランスデューサの試作
- P3-28 λ/4音響多層膜を用いたGHz帯ZnO圧電薄膜共振子(ポスターセッション3,ポスター発表)
- 励振電界を傾斜化した複合圧電材料とその無回折ビームトランスデューサへの応用
- An Ultrasonic Suction Pump with No Physically Moving Parts
- Holding Mechanism Using a Resonance System for a High-Power Ultrasonic Linear Motor
- Waveforms of the Vibration Velocity and the Current of a Piezoelectric Transducer in the Transient State
- A High Power Ultrasonic Linear Motor Using Longitudinal and Bending Hybrid Bolt-Clamped Langevin Type Transducer
- An Analysis of Jumping and Dropping Phenomena of Piezoelectric Transducers using the Electrical Equivalent Circuit Constants at High Vibration Amplitude Levels
- Effects of Vibration Stress and Temperature on the Characteristics of Piezoelectric Ceramics under High Vibration Amplitude Levels Measured by Electrical Transient Responses
- A Low-Wear Driving Method of Ultrasonic Motors
- Effects of a Series Capacitor on the Energy Consumption in Piezoelectric Transducers at High Vibration Amplitude Level
- Characteristics of Ultrasonic Motors Driven in a Vacuum
- ホッピング超音波モ-タの基礎特性
- Energy Storage Characteristics of a Piezo-Generator using Impact Induced Vibration
- Efficiency Improvement of an Ultrasonic Motor Driven with Rectangular Waveform
- Analysis of the Transformation of Mechanical Impact Energy to Electric Energy Using Piezoelectric Vibrator
- Wear Properties and Life Prediction of Frictional Materials for Ultrasonic Motors
- Ultrasonic Motor Utilizing Elastic Fin Rotor : Piezoelectrics
- Dumbbell-Shaped Small-Sized Hybrid Ultrasonic Motor : Ultrasonic Motor
- A Trial Construction of an Ultrasonic Motor with Fluid Coupling
- An estimation of vibration intensity from the measured vibration locus at one point
- Finite Element Method Aided Power Flow Mapping of an Ultrasonic Vibration Tool
- A Multi-Transducer Near Field Acoustic Levitation System for Noncontact Transportation of Large-Sized Planar Objects
- Characteristics of Underwater Near-Field Acoustic Radiation Force Acting on a Planar Object
- 外締め構造を有する大口径ボルト締めランジュバン型ねじり振動子
- Construction of Megatorque Hybrid Transducer Type Ultrasonic Motor
- A Study on the Mechanism of a Scientific Toy "Girigiri-Garigari"
- 面内振動成分を用いた振動インテンシティ計測
- Ultrasonic Transducer Array for Structural Intensity Measurements
- Two-joint robot finger design based on multi-degree-of-freedom ultrasonic motors(Commemoration of the Japan-China Joint Conference on Acoustics 2007 (JCA2007))
- A method for measuring liquid level using the flexural vibrations in a rod
- A basic design of robot finger joint using multi-degree-of-freedom ultrasonic motor
- Ultrasonic linear motor using traveling vibration on fine ceramic twin ridges
- P3-66 A robot finger joint driven by Multi-Degree-of-Freedom Ultrasonic actuator(Poster session 3)
- P3-51 A self-running ultrasonic levitated linear guide(Poster session 3)
- P3-10 Measurements of Intense Ultrasound Field in Air Using a Fiber Optic Probe.(Poster session 3)
- Improved Monitoring of Intracranial Echo-guided Surgery : Reduction of Backscattering and Recognition of the Operating Part Using Microcapsule Vibration
- H-3 Performance Characteristics of A 0.017 cc Linear Microactuator using Flexural Vibration in A Pair of Asymmetric Fins(Medical ultrasound, High power ultrasound)
- Two-way communication over gas pipe-line using multicarrier modulated sound waves with cyclic frequency shifting
- A Multilayered Piezoelectric Transformer Operating in the Third Order Longitudinal Mode and Its Application for an Inverter
- The Measurement of High-Power Characteristics for a Piezoelectric Transducer Based on the Electrical Transient Response
- Support Mechanism for the Ball Rotor in the Three-Degree-of-Freedom Ultrasonic Motor
- Non-Contact Excitation of Vibration Piece Using YAG Laser : Photoacoustic Effect and Spectroscopy
- Tissue Hardness Measurement Using Ultrasonic Radiation Force : Theoretical Derivation of Tissue Hardness from the Relaxation Curve : Photoacoustic Spectroscopy and Ultrasonic Imaging
- Optical Fiber Coupler Array for Multi-Point Sound Field Measurements
- Reconstruction of Acoustic Impedance Distribution of Functionally Gradient Materials by Using Reflection Response : Ultrasonic Measurement
- Acoustic and Vibrating Properties of C/C Composite
- High-speed noncontact ultrasonic transport of small objects using acoustic traveling wave field
- Multiple-frequency ultrasonic imaging by transmitting pulsed waves of two frequencies
- Characteristics of a Bidirectional Rotary Ultrasonic Motor Using Obliquely Polarized Piezoelectric Transducers
- NONCONTACT SUSPENDING AND TRANSPORTING PLANAR OBJECTS BY USING ACOUSTIC LEVITATION
- Magnification of Transportation Range Using Not-Contact Acoustic Levitation by Connecting Vibrating Plates
- A Finite-Element Analysis of Transient Vibration of an Ultrasonic Welding Tool
- Estimation of Trabecular Bone Axis for Characterization of Cancellous Bone Using Scattered Ultrasonic Wave
- Ultrasonic Scattering Study of Cancellous Bone for Osteoporosis Diagnosis
- Trial Construction of a Noncontact Ultrasonic Motor with an Ultrasonically Levitated Rotor
- Inverse Scattering of a Medium Which Supports M-Types of Wave
- A Fiber Optic Vertical Coupler for the Matrix Tactile Sensor
- P2-6 Numerical analysis for ultrasonic beam of variable line focus transducer(Poster session 2)
- I-1 Multi-layered Transducers Using Polyurea Film(Device application (English session))
- Cancellation of parametric-effect-induced error in airborne ultrasound Doppler velocimetry
- Enhancement of Brillouin Scattering Signal in Optical Fibers by Use of Pulsed Pump Light