Foam ratio as a measure for mechanical foam-breaking in gas bubbling systems.
スポンサーリンク
概要
- 論文の詳細を見る
The volume fraction of liquid in foam, designated as the foam ratio, was measured for a gas-bubbling system using various foaming liquids. The foam ratio can be used as a substantial measure of the dynamic foaming capacity for gas-bubbling systems. The applicability of the foam ratio for evaluating the performance of mechanical foam-breaking was investigated. Furthermore, the effect of the operating conditions on the foam ratio was related to the extent of mechanical foam-breaking.
- 公益社団法人 日本化学会の論文
著者
-
Yamagiwa Kazuaki
Department Of Chemical Engineering Faculty Of Engineering Niigata University
-
Ohkawa Akira
Department Of Chemical Engineering Faculty Of Engineering Niigata University
-
Yasukawa Masami
Department of Material and Chemical Engineering, Niigata University
-
Yamagiwa Kazuaki
Department of Material and Chemical Engineering, Faculty of Engineering, The University of Niigata
-
Ohkawa Akira
Department of Material and Chemical Engineering, Faculty of Engineering, The University of Niigata
関連論文
- Simultaneous Reduction of No_x, N_2O, SO_2 Emissions from a Fluidized Bed Coal Combustor Using Alternative Bed Material
- Enhancement of Gas-Liquid Mass Transfer with Unsteadily Forward-Reverse Rotating Multiple Delta Blade Impellers in an Unbaffled Agitated Vessel
- Movement of Solid Particles on and off Bottom of an Unbaffled Vessel Agitated by Unsteadily Forward-Reverse Rotating Impeller
- Foam Breaking Characteristics of a Mechanical Foam-Breaker Using Shear Force Fitted to a Stirred-Tank Reactor
- Performance Characteristics of a Stirred-Tank Reactor with a Mechanical Foam-Breaker Utilizing Shear Force
- Nitrification Performance of Membrane-Attached Nitrifying Biofilm
- Photo-Crosslinked Copolymer Gel as an Adsorbent for Temperature-Swing Adsorption Process
- Effect of Perforated Plate on Concentration of Poly(vinyl Alcohol) by Foam Fractionation with External Reflux
- Temperature-Swing Column Adsorption of Nonionic Surfactant with Poly(vinylmethylether) Gel
- Temperature-Swing Adsorption of Nonionic Surfactant with Photo-Crosslinked Polymeric Gel
- Disinfection Kinetics of Legionella pneumophila by Hydrogen Peroxide
- Effects of Liquid Property on Air Entrainment and Oxygen Transfer Rates of a Plunging Jet Reactor
- Effect of Salt on Temperature-Swing Adsorption of Nonionic Surfactant with Poly(Vinylmethyl Ether) Gel
- Effect of External Reflux on Foam Fractionation of Poly(Vinyl Alcohol)
- Maximum Penetration Depth of Air Bubbles Entrained by Vertical Liquid Jet
- Effect of Nozzle Contraction Angle on Air Entrainment Rate of a Vertical Plunging Liquid Jet
- SIMULTANEOUS REMOVAL OF ORGANIC CARBON AND NITROGEN BY A PLUNGING LIQUID JET BIOREACTOR WITH CROSSFLOW FILTRATION OPERATED UNDER ZONE-LIMITED AERATION
- ADSORPTION OF TRITON X-100, TRYPTOPHAN AND BSA ON TEMPERATURE-SENSITIVE POLY(VINYLMETHYLETHER)GEL
- EFFECTS OF ALGINATE COMPOSITION AND GELLING CONDITIONS ON DIFFUSIONAL AND MECHANICAL PROPERTIES OF CALCIUM-ALGINATE GEL BEADS
- RELATIONSHIP BETWEEN MANNURONIC TO GULURONIC ACID RATIO OF ALGINATE AND CHARGE DENSITY OF Ca-ALGINATE COMPLEX
- SIMULTANEOUS ORGANIC CARBON REMOVAL AND NITRIFICATION BY BIOFILM FORMED ON OXYGEN ENRICHMENT MEMBRANE
- ADSORPTION OF HYDROPHOBIC NONIONIC SURFACTANT ON POLY (VINYLMETHYLETHER) GEL
- Relationship between the Foam-breaking Performance and the Hydraulic Behavior of Liquid Dispersed from Mechanical Foam-breakers : Studies on the Mechanical Control of Fermentation Foams (V)
- Performance Evaluation of Mechanical Foam-breakers Utilizing the Impact Force of Dispersed Liquid Particles : Studies on the Mechanical Control of Fermentation Foams (IV)
- Some Characteristics of a Double-column Gas-liquid Contactor with Gas Entrainment and Its Application to an Aerator for Activated Sludge Treatment : Development of the Double-column Gas-liquid Contactor with a Gas Entrainment Process and Its Application t
- Some Factors Affecting the Performance of a Mechanical Foam-breaker with a Rotating Disk
- The Performance of a Mechanical Foam Breaker witha Rotaing Disk
- Production of Amylase by immobilized Aspergillus oryzae in an anaerobic vessel
- New Tuning Method for IMC Controller
- EFFECT OF LIQUID PROPERTY ON GAS ENTRAINMENT BEHAVIOR IN A PLUNGING LIQUID JET AERATION SYSTEM USING INCLINED NOZZLES
- Removal of Trichloroethylene from Water by Aeration, Pervaporation and Membrane Distillation
- PERFORMANCE CHARACTERISTICS OF NOZZLE FOAM-BREAKERS FITTED TO TOWER AERATOR
- Foaming in an Aerated Stirred Tank and Its Mechanical Control
- A Technique for Measuring Gas Holdup in a Downflow Bubble Column with Gas Entrainment by a Liquid Jet
- Recovery of Hexavalent Chromium Ion from Methanol with Ion Exchange Resin
- Effect of Liquid Disintegration Pattern from the Disk on the Performance of a Mechanical Foam-Breaker with a Rotating Disk
- Effect of Disk Diameter on the Foam-Breaking Capacity of a Mechanical Foam-Breaker with a Rotation Disk
- Elution Phenomena of Acidic Ions from Granular Snow and Spherical Ice
- Behavior of Impurities during the Formation of an Ice Sphere
- Separation of Aromatic Hydrocarbons from Gasoline Vapor by Vapor Permeation through Triethylene Glycol Liquid Membrane
- Separation of Benzene/Cyclohexane by Vapor Permeation through Triethylene Glycol Liquid Membrane
- Effects of Antifoam Agents on Cultivation of Baker's Yeast
- EFFECT OF CELL LOADING ON ENCAPSULATION OF IMMOBILIZED YEAST BY TWO-STEP PREAPARATION PROCEDURE
- FORMATION OF CALCIUM-ALGINATE GEL COATING ON BIOCATALYST IMMOBILIZATION CARRIER
- Relation between Critical Disk Speed for Foam-Breaking of Rotating-Disk Mechanical Foam-Breakers and Foaming Characteristics of Solutions
- Relation between Mechanical Foam-Breaking Difficulty and the Forming Characterisitcs of Solutions
- MEMBRANE FOULING IN ULTRAFILTRATION OF HYDROPHOBIC NONIONIC SURFACTANT
- EFFECT OF ANTIFOAM FOULING ON SOLUTE REJECTION BY ULTRAFILTRATION MEMBRANE
- Effects of Antifoam with Inverted Cloud Point on Permeation and Solute Rejection in Membrane Filtration Process
- Effect of Ultrasonication on Excess Sludge Bioavailability for Methane Production
- Gas holdup and gas entrainment rate in downflow bubble column with gas entrainment by a liquid jet operating at high liquid throughput.
- Operational Characteristics of Aerated Agitated Vessels under Mechanical Foam Control
- Foam ratio as a measure for mechanical foam-breaking in gas bubbling systems.
- Gas entrainment rate and flow pattern in a plunging liquid jet aeration system using inclined nozzles.
- Dynamic formation of polyion and polyion complex membranes, and their solute rejection.
- Electrochemical activity of fluidized bed electrodes (FBEs) inserted electro-conductive partition plates.
- Gas holdup in downflow bubble columns with gas entrainment by a liquid jet.
- Flow characteristics of downflow bubble columns with gas entrainment by a liquid jet.
- Power requirement in an aerated agitated vessel under foaming.
- Effect of polyion composition on solute rejection by dynamic polyion complex membranes.
- EFFECT OF NOZZLE LENGTH ON GAS EN-TRAINMENT CHARACTERISTICS OF VERTI-CAL LIQUID JETS