PRE-06 NEW SURFACE MOUNT SYSTEM COMPOSED OF PLASTIC MINIATURE PANTOGRAPH MECHANISMS AND A POSITIONING TABLE(MM/Micro/Nano Precision Equipments II,Technical Program of Oral Presentations)
スポンサーリンク
概要
- 論文の詳細を見る
A new surface mount system that is composed of a lot of miniature manipulators has been proposed for system down-sizing and high speed. In this paper we developed surface mount system consists of new plastic miniature pantograph mechanism made of polypropylene and XY table, which can operate electric device 0603(0.6mm×0.3mm). And we evaluate the system. The surface mount system consists of surface mount machine to pick-and-place electric device and 2 DOF XY table to carry printed circuit board. The surface mount machine consists of the carrying function of injection pantograph mechanism and the function of suction-and-release electric device by vacuum pinset attached on the tip of the pantograph. And we made surface mount machine, 2 DOF XY table, and circuits to control the system as trial machine. We evaluated the trial surface mount system about positioning accuracy, velocity of placing, efficiency of placing and so on.
- 一般社団法人日本機械学会の論文
- 2009-06-17
著者
-
HORIE Mikio
Precision and Intelligence Laboratory, Tokyo Institute of Technology
-
Horie Mikio
Precision And Intelligence Laboratory Tokyo Institute Of Technology
-
Horie Mikio
Precision & Intelligence Laboratory Tokyo Institute Of Technology
-
KAI Yohei
Interdisplinary Graduate school, Tokyo Institute of Technology
-
KAMIYA Daiki
Precision and Intelligence Laboratory, Tokyo Institute of Technology
-
NAKAZATO Yuichi
Department of Mechanical Enginerring, Nippon Institute of Technology
-
Kai Yohei
Interdisplinary Graduate School Tokyo Institute Of Technology
-
Kamiya Daiki
Precision & Intelligence Laboratory Tokyo Institute Of Technology
-
Nakazato Yuichi
Department Of Mechanical Enginerring Nippon Institute Of Technology
-
Nakazato Yuichi
Department Of Internal Medicine School Of Medicine Keio University
関連論文
- Cleaning of Dust between Interactive Contact Surfaces by Application of Normal Loads of Artificial Stainless-Cantilever in AFM
- Variations of Minimum Contact Areas on Slipping Range using Micro-Glass Spheres
- Synthesis of Spatial Mechanism with Consideration of Degree of Freedom of Mechanism
- A Synthesis of Planar Mechanisms with Pairs of Optimum Tolerances
- PRE-06 NEW SURFACE MOUNT SYSTEM COMPOSED OF PLASTIC MINIATURE PANTOGRAPH MECHANISMS AND A POSITIONING TABLE(MM/Micro/Nano Precision Equipments II,Technical Program of Oral Presentations)
- P-PRE-05 STUDY ON THE MICROSURGERY SUPPORT SYSTEM USING THE SMA MICROMANIPULATOR(MM/Micro/Nano Precision Equipments,Technical Program of Poster Session)
- Displacement Analysis of Pantograph Mechanisms with Superelastic Hinges
- Design System of Superelastic Hinges and Its Application to Micromanipulators
- Development of Mechanical Systems for Micro-Bonding by Adhesive : Proposal of Micro-Application Technology of Adhesive Resin
- Laser Cutting of Thin Shape-Memory-Alloy Sheet
- MMT-03 DEVELOPMENT OF A MICROMANIPULATOR MADE OF DIAMOND HAVING REVERSAL MECHANISM
- Dynamic Characteristics of Planar Link Mechanisms with Clearances During Accelerated and Decelerated Motions : Series C : Vibration, Control Engineering, Engineering for Industry
- A Kineto-Elastodynamic Analysis of Planar Link Mechanisms with Three-Dimensional Offsets and Clearances : Vibration, Control Engineering, Engineering for Industry
- Dynamic Characteristics of Plane Link Mechanisms with Clearances : Restraint of Separation between Pairing Elements
- Dynamic Characteristics of Planar Link Mechanisms with Clearances : Conditions of Separation Occurrence between Pairing Elements
- A Displacement Analysis of Spatial Four-Bar Mechanisms with Clearances and Tolerances
- A Displacement Analysis of Plane Multilink Mechanisms with Clearances and Tolerances
- A Dynamic Analysis of the Plane Crank-and-Rocker Mechanisms with Clearances
- A Dynamic Analysis of Mechanisms with Clearances
- Networking and Information Distribution in Robots Composed of Identical Units
- Development of Spatial Parallel Manipulators with Six Degrees of Freedom
- The Effects of Calcium Channel Blockers on Nuclear Factor Kappa B Activation in the Mesangium Cells
- 2310 High Yield Batch Fabrication of Micro Spiral Beam for Multi-input Multi-output Optical Switch
- 2 Degree-of-Freedom Spiral Micromirror Manipulator : Fabrication and Spatial Mechanical Assembling
- P-MMT-02 DESIGN AND MANUFACTURING OF MICRO MECHANISM ELEMENTS OF 2-DOF MICROMANIPULATOR
- MMT-01 DYNAMIC CHARACTERISTIC OF MINIATURE MOLDING PANTOGRAPH MECHANISMS FOR SURFACE MOUNT SYSTEMS
- Surface Forces related to the Accumulation and Dispersion of Dust due to the Locomotion of a Cantilever