J0103-3-5 低接触圧領域でのアルミ薄膜による接触熱抵抗低減法(電子情報機器,電子デバイスの強度・信頼性評価と熱制御(3))

概要

論文の詳細を見る
We tried experimentally to reduce the thermal contact resistance by using aluminum thin film under low contact pressure region from 10 to 1000 kPa. As the results of the experiment, the following conclusions were obtained. (1) In spite of binal interfacial surfaces, the aluminum thin films of O-temper and F-temper as filler materials showed 1.0〜1.5 times and 1.4〜2.0 times larger thermal contact conductance than the bare contact condition, respectively. It is due to the simultaneous effects of reduction of effective interfacial thickness and increase of real contact area ratio. (2) The aluminum thin films with vacuum pump oil or phase change sheets on the double surfaces of the film showed 4〜5 times and 4〜7 times larger thermal contact conductance than the bare contact condition, respectively. It is mainly due to the increase of the thermal conductivity of the interfacial material. (3) The experimental data were well correlated by using effective interfacial thickness and real contact area ratio.
一般社団法人日本機械学会の論文
2009-09-12