Bond Strength to Primed Ti-6Al-7Nb Alloy of Two Acrylic Resin Adhesives
スポンサーリンク
概要
- 論文の詳細を見る
This study aimed to evaluate the bonding behavior of two acrylic resin adhesives joined to titanium-aluminum-niobium (Ti-6Al-7Nb) alloy primed with two metal conditioners. Cast Ti-6Al-7Nb alloy disks were air-abraded with alumina and bonded with six combinations of two resin adhesives (Super-Bond C&B and Multi Bond) and three surface conditions (Alloy Primer, M.L. Primer, and unprimed control). Shear bond strengths were determined both before and after 20,000 thermal cycles. The tri-n-butylborane initiated Super-Bond C&B resin exhibited greater bond strength than the BPO-amine initiated Multi-Bond resin. Both the Alloy Primer with a hydrophobic phosphate and the M.L. Primer with a phosphonoacetate effectively improved the 24-hour bond strength of Multi-Bond resin as well as the post-thermocycling bond strength of Super-Bond C&B resin.
著者
-
FURUCHI Mika
Department of Fixed Prosthodontics, Nihon University School of Dentistry
-
TANOUE Naomi
Nagasaki University Hospital
-
KOIZUMI Hiroyasu
Department of Fixed Prosthodontics, Nihon University School of Dentistry
-
MATSUMURA Hideo
Department of Fixed Prosthodontics, Nihon University School of Dentistry
-
TANOUE Naomi
Department of Specialized Dentistry, Nagasaki University Hospital of Medicine and Dentistry
-
Matsumura H
Department Of Fixed Prosthodontics Nihon University School Of Dentistry
-
Koizumi H
Department Of Fixed Prosthodontics Nihon University School Of Dentistry
-
Koizumi Hiroyasu
日本大学 歯学部
-
Tanoue N
Nagasaki University Hospital
-
Tanoue Naomi
Nagasaki Univ. Hospital Nagasaki Jpn
-
Tanoue Naomi
Division Of General Dentistry Nagasaki University Hospital
-
YONEYAMA Takayuki
Department of Metallurgy, Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental Uni
-
YANAGIDA Hiroaki
Department of Specialized Dentistry, Nagasaki University Hospital of Medicine and Dentistry
-
Matsumura Hideo
Nihon Univ. School Of Dentistry Tokyo Jpn
-
YONEYAMA Takayuki
Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University
-
Yanagida Hiroaki
Department Of Specialized Dentistry Nagasaki University Hospital Of Medicine And Dentistry
-
Yanagida Hiroaki
Department Of Industrial Chemistry Facluty Of Engineering University Of Tokyo
-
Matsumura Hideo
Department Of Crown And Bridge Prosthodontics Nihon University School Of Dentistry
-
Yoneyama Takayuki
Nihon Univ. School Of Dentistry Tokyo Jpn
-
Yoneyama Takayuki
Department Of Dental Materials Nihon University School Of Dentistry
-
Furuchi Mika
Department Of Fixed Prosthodontics Nihon University School Of Dentistry
-
Yanagida Hiroaki
Department Of Applied Prosthodontics Nagasaki University Graduate School Of Biomedical Sciences
-
Koizumi Hiroyasu
Department Of Fixed Prosthodontics Nihon University School Of Dentistry
-
Yanagida Hiroaki
Department Of Applied Chemistry Faculty Of Engineering University Of Tokyo
-
Tanoue Naomi
Department of Pharmacy, Kumamoto University Hospital
-
Tanoue Naomi
Department of Aesthetic Dentistry, Nagasaki University Hospital of Medicine and Dentistry
関連論文
- Effect of preliminary irradiation on the bond strength between a veneering composite and alloy
- Evaluation of single liquid primers with organic sulfur compound for bonding between indirect composite material and silver-palladium-copper-gold alloy
- Effects of Monomer Composition and Original Filler Content on Filler Loading in the Resulting Centrifuged Composites
- Effect of alumina air-abrasion on mechanical bonding between an acrylic resin and casting alloys
- Bond Strength to Primed Ti-6Al-7Nb Alloy of Two Acrylic Resin Adhesives
- Color Stability of Acrylic Resin Adhesives with Different Initiation Modes
- Marginal and Internal Adaptation of Zirconium Dioxide Ceramic Copings and Crowns with Different Finish Line Designs
- Effect of preliminary irradiation on depth of cure and hardness of a veneering composite
- Comparative Evaluation of Thione and Phosphate Monomers on Bonding Gold Alloy and Ti-6Al-7Nb Alloy with Tri-n-butylborane initiated Resin
- Bond strength to bovine dentin of a composite core build-up material combined with four different bonding agents
- Effect of Metal Priming Agents on Bond Strength of Resin-modified Glass Ionomers Joined to Gold Alloy
- Effect of single-liquid priming agents on adhesive bonding to aluminum oxide of a methacrylic resin.
- Relation between Attractive Force and Keeper Surface Characteristics of Iron-neodymium-boron Magnetic Attachment Systems
- Effect of a Metal Priming Agent on Wear Resistance of Gold Alloy-indirect Composite Joint
- Depth of cure and hardness of an indirect composite polymerized with three laboratory curing units
- Effects of alumina air-abrasion and acidic priming agents on bonding between SUS XM27 steel and auto-polymerizing acrylic resin
- Effect of metal priming agents on bonding characteristics of an acrylic resin joined to SUS XM27 steel
- Effect of Acidic Primers on Bonding Three Magnetic Steel Alloys with Tri-n-butylborane Initiated Methacrylic Resin
- Properties of an Indirect Composite Material Polymerized with Two Different Laboratory Polymerizing Systems
- A New Laboratory Polymerizing Apparatus Equipped with Halogen and Metal Halide Light Sources
- Effect of metal halide light source on hardness, water sorption and solubility of indirect composite material
- Effect of noble metal adhesive systems on bonding between an indirect composite material and a gold alloy
- Fabrication of a maxillary posterior fixed partial denture with a type 4 gold alloy and a dual-polymerizing indirect composite
- A Nine-year Follow-up of a Porcelain Laminate Veneer Restoration Applied to an Adolescent with Traumatized Dentition : A Clinical Report
- International telephone code used for citizenship identification in a denture
- Application of a pre-impregnated fiber-reinforced composite in the fabrication of an indirect dowel-core
- Influence of Centrifugal Force on Filler Loading of Resin Composites
- Porcelain laminate veneer restorations bonded with a three-liquid silane bonding agent and a dual-activated luting composite
- Twenty-four Hour Bond Strength Between Layers of a Highly Loaded Indirect Composite
- Effect of Single-liquid Acidic Primers on Bonding of a Composite Luting Agent Joined to a Prefabricated Alumina Coping Material
- Effect of acidic primers on adhesive bonding of tri-n-butylborane initiated adhesive resin to alumina
- Evaluation of thiouracil-based adhesive systems for bonding cast silver-palladium-copper-gold alloy
- P-Glycoprotein Mediates Efflux Transport of Darunavir in Human Intestinal Caco-2 and ABCB1 Gene-Transfected Renal LLC-PK1 Cell Lines
- Effectiveness of Bonding Systems on Bonding Durability of a Prefabricated Porcelain Material
- Effect of Hydrofluoric Acid Etching on Shear Bond Strength of an Indirect Resin Composite to an Adhesive Cement
- Effects of Phase Constitution of Zr-Nb Alloys on Their Magnetic Susceptibilities
- In vitro short-term platelet adhesion on various metals
- Active Hydroxyl Groups on Surface Oxide Film of Titanium, 316L Stainless Steel, and Cobalt-Chromium-Molybdenum Alloy and Its Effect on the Immobilization of Poly(Ethylene Glycol)
- Bending Property of Super-Elastic Ti-Ni Alloy Dental Castings with Different Heat Treatments
- Determination of the Immobilization Manner of Amine-Terminated Poly(Ethylene Glycol) Electrodeposited on a Titanium Surface with XPS and GD-OES
- Inhibition Effect of Zirconium Coating on Calcium Phosphate Precipitation of Titanium to Avoid Assimilation with Bone
- Fatigue Property of Ti-5Al-13Ta Alloy Dental Castings in 0.9% NaCl Solution
- Fatigue Life Prediction of Biomedical Titanium Alloys under Tensile/Torsional Stress
- Corrosion Resistance and Surface Characterization of Electrolyzed Ti-Ni Alloy
- Mechanical Strength and Microstructure of Laser-welded Ti-6Al-7Nb Alloy Castings
- Improved Biocompatibility of Titanium-Zirconium (Ti-Zr) Alloy : Tissue Reaction and Sensitization to Ti-Zr Alloy Compared with Pure Ti and Zr in Rat Implantation Study
- Fatigue Property of Super-Elastic Ti-Ni Alloy Dental Castings
- Bending Properties of Co-Ni-Cr-Mo Alloy Wire for Orthodontic Application
- Deformation Properties of Ti-6Al-7Nb Alloy Castings for Removable Partial Denture Frameworks
- Tissue Reactions and Sensitivity to Iron-Chromium Alloys
- A Method to Monitor Corrosion of Chromium-iron Alloys by Monitoring the Chromium Ion Concentration in Urine
- Influence of Laboratory Light-curing Unit Variation on Properties of Prosthetic Composites
- Marginal Fit and Microgaps of Implant-abutment Interface with Internal Anti-rotation Configuration
- Tuning of a Surface Acoustic Wave Resonator Formed of Lithium Tetraborate Substrate Combined with Piezoelectric Ceramic Element
- Effects of IL-6 and Soluble IL-6 Receptor on the Expression of Cartilage Matrix Proteins in Human Chondrocytes
- Research Projects on Materials and Devices Published in 2005 by Members of the Japan Prosthodontic Society : A Review
- Influence of Abutment Materials on the Resultant Color of Heat-pressed Lithium Disilicate Ceramics
- Effect of bending on the mechanical properties of gold wrought-wire clasps : a non-linear finite element analysis
- Comparative examination of damping capacities with laser displacement apparatus in orthodontic wires : Super-elastic Ti-Ni alloy and conventional stainless steel wires
- Effects of the External Electric Field from a Substrate on Conductance Changes of SnO_2 Thin Films by CO Gas
- SEM Observation on the Surface of Titanium Miniplates Retrieved from Patients after Maxillofacial Surgical Treatment
- The influence of storing alginate impressions sprayed with disinfectant on dimensional accuracy and deformation of maxillary edentulous stone models
- Evaluation of two dual-functional primers and a tribochemical surface modification system applied to the bonding of an indirect composite resin to metals
- TEM Observations of the Grain Boundaries in a Semiconducting Barium Titanate Thick Film
- The Thickness-Dependence of Dielectric and Physical Properties of BaTiO_3 Ceramic Thick Films
- Current bonding systems for resin-bonded restorations and fixed partial dentures made of silver-palladium-copper-gold alloy
- Effects of pH, Potential, and Deposition Time on the Durability of Collagen Electrodeposited to Titanium
- Influence of laboratory light sources on the wear characteristics of indirect composites
- Current status of zirconia-based fixed restorations
- Effect of laser irradiation conditions on the laser welding strength of cobalt-chromium and gold alloys
- Effect of Relative Humidity on Current-Voltage Characteristics of Li-Doped CuO/ZnO Junction
- Quantitative Analysis of Ethanol in Water Solution by a Heterocontact-type Sensor of CuO/ZnO
- Three-Step Positive Temperature Coefficient of Resistivity on (BaSb)(TiZr)O_3 Composite Ceramics with a Surface Barrier-Layer
- Estimation of Electrical Conductivity of Composite Materials. : II. Numerical Method for Two-Dimensional Tetragonal Texture
- Estimation of Electrical Conductivity of Composite Materials. I. : Conductivity along Grain Boundary
- Two-Step Anomalous Increase of Resistance on La_Ba_TiO_3=Bi_2O_3 Composite Ceramics
- Two-Step Anomalous Increase of Resistivity on La-Doped BaTiO_3-Bi_2O_3 Composite Ceramics with Surface Barrier-Layer
- On the Surface Structure of the La-Doped BaTiO_3-Bi_2O_3 Composite Ceramic Showing a Two-Step Anomalous Increase of Resistivity
- Numerical Estimation of the Dependence of Dielectric Constant of BaTiO_3. Thick Films on Grain-Size Distribution
- Decomposition Pressure of Co_3O_4 Determined from Electrical Conductivity Measurements
- Shear bond strength between an indirect composite veneering material and zirconia ceramics after thermocycling
- Effect of Surface Treatments on Repair Bond Strength of Aged Light Polymerizing Indirect Composites
- Color Stability of an Indirect Composite Polymerized with Two Different Laboratory Polymerization Systems
- Influence of Laboratory Procedure on Attractive Force of Magnetic Attachment Systems
- Effect of Varying Polymerization Modes on Flexural Strength of an Indirect Composite Reinforced with a Monomer-Impregnated Glass Fiber Material
- Effect of Noble Metal Conditioner on Wear Resistance of Composite-to-metal Bonded Specimens
- A Centrifugal Light-polymerizing Apparatus Designed for Preparation of Highly Filled Nano-composites
- Effect of Single-liquid Acidic Primers on Bonding of a Composite Luting Agent Joined to a Prefabricated Alumina Coping Material
- Effect of immersion disinfection of alginate impressions in sodium hypochlorite solution on the dimensional changes of stone models
- Effect of surface treatment on bond strength between an indirect composite material and a zirconia framework
- Influence of air-abrasion and subsequent heat treatment on bonding between zirconia framework material and indirect composites
- Properties of indirect composites reinforced with monomer-impregnated glass fiber
- Bonding between layering materials and zirconia frameworks
- Dimensional changes in stone casts resulting from long-term immersion of addition-type silicone rubber impressions in disinfectant solutions
- The influence of polymerization conditions on color stability of three indirect composite materials
- Influence of electrolytic treatment time on the corrosion resistance of Ni-Ti orthodontic wire
- Effect of immersion disinfection of alginate impressions in sodium hypochlorite solution on the dimensional changes of stone models
- PARTIAL LIVER TRANSPLANTATION WITH PRIMARY REVASCULARIZATION IN DOGS:Preliminary Report On New Method And Its Theoretical Background
- A nine-year clinical case study of a resin-bonded fixed partial denture seated on the maxillary anterior teeth.
- Evaluation of a newly developed polymethyl methacrylate powder for brush-dip technique