Mechanical Strength and Microstructure of Laser-welded Ti-6Al-7Nb Alloy Castings

概要

論文の詳細を見る
Mechanical properties of laser-welded castings of Ti-6Al-7Nb alloy, CP Ti, and Co-Cr alloy were investigated and compared to the unwelded castings using a tensile test. Dumbbell-shaped specimens were cut at the center, and two halves of the specimens were welded with an Nd:YAG laser welding machine at 220 or 260V of laser voltage. The mechanical strength of 260V groups was higher than that of 220V groups for Ti-6Al-7Nb and Co-Cr alloys except for CP Ti. All 260V laser-welded castings of Ti-6Al-7Nb alloy and CP Ti, which fractured outside the welded joints, exhibited ductile characteristics, while all laser-welded Co-Cr alloy castings, which fractured within the welded joints, showed brittle characteristics. This study proved that the mechanical strength of laser-welded Ti-6Al-7Nb alloy and CP Ti castings was as high as that of unwelded castings, while the mechanical properties of laser-welded alloy joints were influenced by microstructural changes.
日本歯科理工学会の論文