Effect of Single-liquid Acidic Primers on Bonding of a Composite Luting Agent Joined to a Prefabricated Alumina Coping Material
スポンサーリンク
概要
- 論文の詳細を見る
Purpose: The aim of this study was to assess the effect of acidic primers on adhesive bonding to prefabricated alumina material designed for fixed restorations.Methods: High-purity alumina disks (Procera AllCeram) were primed with one of the following materials: Acryl Bond, All Bond II Primer B, Alloy Primer, Estenia Opaque Primer, M.L. Primer, MR. Bond, and Super-Bond Liquid. The specimens were bonded with a dual-polymerizing luting composite (Variolink II). Unprimed specimen was prepared as the control. Bond strengths were determined both before and after thermocycling.Results: Average bond strength before thermocycling ranged from 12.0 to 39.1 MPa, whereas average bond strength after thermocycling varied from 0.0 to 26.9 MPa. The statistically highest post-thermocycling bond strength was obtained with the use of the Alloy Primer, Estenia Opaque Primer, and M.L. Primer agents.Conclusion: It can be concluded that the use of either the Estenia or Alloy Primer material, which contain 10-methacryloyloxydecyl dihydrogen phosphate (MDP), or the M.L. Primer, which contains 6-methacryloyloxyhexyl phosphonoacetate (6-MHPA), is recommended for bonding the Procera alumina copings with the Variolink II composite.
- 社団法人日本補綴歯科学会の論文
著者
-
KOIZUMI Hiroyasu
Department of Fixed Prosthodontics, Nihon University School of Dentistry
-
MATSUMURA Hideo
Department of Fixed Prosthodontics, Nihon University School of Dentistry
-
Matsumura H
Department Of Fixed Prosthodontics Nihon University School Of Dentistry
-
ISHIKAWA Yumi
Department of Fixed Prosthodontics, Nihon University School of Dentistry
-
Yamada Kazuya
Nihon University Graduate School of Dentistry
関連論文
- Effect of preliminary irradiation on the bond strength between a veneering composite and alloy
- Evaluation of single liquid primers with organic sulfur compound for bonding between indirect composite material and silver-palladium-copper-gold alloy
- Effects of Monomer Composition and Original Filler Content on Filler Loading in the Resulting Centrifuged Composites
- Effect of alumina air-abrasion on mechanical bonding between an acrylic resin and casting alloys
- Bond Strength to Primed Ti-6Al-7Nb Alloy of Two Acrylic Resin Adhesives
- Color Stability of Acrylic Resin Adhesives with Different Initiation Modes
- Marginal and Internal Adaptation of Zirconium Dioxide Ceramic Copings and Crowns with Different Finish Line Designs
- Effect of preliminary irradiation on depth of cure and hardness of a veneering composite
- Comparative Evaluation of Thione and Phosphate Monomers on Bonding Gold Alloy and Ti-6Al-7Nb Alloy with Tri-n-butylborane initiated Resin
- Bond strength to bovine dentin of a composite core build-up material combined with four different bonding agents
- Effect of Metal Priming Agents on Bond Strength of Resin-modified Glass Ionomers Joined to Gold Alloy
- Effect of single-liquid priming agents on adhesive bonding to aluminum oxide of a methacrylic resin.
- Relation between Attractive Force and Keeper Surface Characteristics of Iron-neodymium-boron Magnetic Attachment Systems
- Effect of a Metal Priming Agent on Wear Resistance of Gold Alloy-indirect Composite Joint
- Depth of cure and hardness of an indirect composite polymerized with three laboratory curing units
- Effects of alumina air-abrasion and acidic priming agents on bonding between SUS XM27 steel and auto-polymerizing acrylic resin
- Effect of metal priming agents on bonding characteristics of an acrylic resin joined to SUS XM27 steel
- Effect of Acidic Primers on Bonding Three Magnetic Steel Alloys with Tri-n-butylborane Initiated Methacrylic Resin
- Properties of an Indirect Composite Material Polymerized with Two Different Laboratory Polymerizing Systems
- A New Laboratory Polymerizing Apparatus Equipped with Halogen and Metal Halide Light Sources
- Effect of metal halide light source on hardness, water sorption and solubility of indirect composite material
- Effect of noble metal adhesive systems on bonding between an indirect composite material and a gold alloy
- Fabrication of a maxillary posterior fixed partial denture with a type 4 gold alloy and a dual-polymerizing indirect composite
- A Nine-year Follow-up of a Porcelain Laminate Veneer Restoration Applied to an Adolescent with Traumatized Dentition : A Clinical Report
- International telephone code used for citizenship identification in a denture
- Application of a pre-impregnated fiber-reinforced composite in the fabrication of an indirect dowel-core
- Influence of Centrifugal Force on Filler Loading of Resin Composites
- Porcelain laminate veneer restorations bonded with a three-liquid silane bonding agent and a dual-activated luting composite
- Twenty-four Hour Bond Strength Between Layers of a Highly Loaded Indirect Composite
- Effect of Single-liquid Acidic Primers on Bonding of a Composite Luting Agent Joined to a Prefabricated Alumina Coping Material
- Effect of acidic primers on adhesive bonding of tri-n-butylborane initiated adhesive resin to alumina
- Evaluation of thiouracil-based adhesive systems for bonding cast silver-palladium-copper-gold alloy
- Effectiveness of Bonding Systems on Bonding Durability of a Prefabricated Porcelain Material
- Effect of Hydrofluoric Acid Etching on Shear Bond Strength of an Indirect Resin Composite to an Adhesive Cement
- Bending Property of Super-Elastic Ti-Ni Alloy Dental Castings with Different Heat Treatments
- Influence of Laboratory Light-curing Unit Variation on Properties of Prosthetic Composites
- Marginal Fit and Microgaps of Implant-abutment Interface with Internal Anti-rotation Configuration
- Effects of IL-6 and Soluble IL-6 Receptor on the Expression of Cartilage Matrix Proteins in Human Chondrocytes
- Research Projects on Materials and Devices Published in 2005 by Members of the Japan Prosthodontic Society : A Review
- Influence of Abutment Materials on the Resultant Color of Heat-pressed Lithium Disilicate Ceramics
- Evaluation of two dual-functional primers and a tribochemical surface modification system applied to the bonding of an indirect composite resin to metals
- Current bonding systems for resin-bonded restorations and fixed partial dentures made of silver-palladium-copper-gold alloy
- Influence of laboratory light sources on the wear characteristics of indirect composites
- Effect of Surface Treatments on Repair Bond Strength of Aged Light Polymerizing Indirect Composites
- Effect of Single-liquid Acidic Primers on Bonding of a Composite Luting Agent Joined to a Prefabricated Alumina Coping Material
- A nine-year clinical case study of a resin-bonded fixed partial denture seated on the maxillary anterior teeth.