Effects of alumina air-abrasion and acidic priming agents on bonding between SUS XM27 steel and auto-polymerizing acrylic resin
スポンサーリンク
概要
- 論文の詳細を見る
The purpose of this study was to evaluate the effects of functional monomers contained in the primers, as well as alumina particle abrasion on bonding between stainless steel and acrylic resin. SUS XM27 steel was primed with one of the following materials; Alloy Primer, Estenia Opaque Primer, M. L. Primer, and Super-Bond Liquid. Steel disks were either ground flat or alumina-blasted, primed with one of the four agents, and bonded with an acrylic resin (Unifast Trad). Bond strength was determined both before and after thermocycling (2,000 or 20,000 cycles). Among the four priming agents, the Alloy Primer and Estenia Opaque Primer, both of which contain 10-methacryloyloxydecyl dihydrogen phosphate (MDP), exhibited better bonding performance than the others. Alumina air-borne particle abrasion considerably improved the durability of bonding between the steel and the resin material. It can be concluded that alumina blasting followed by priming with an MDP agent is recommended for bonding the resin and SUS XM27 steel. (J. Oral Sci. 49, 191-195, 2007)
- 日本大学歯学部の論文
著者
-
KOIZUMI Hiroyasu
Department of Fixed Prosthodontics, Nihon University School of Dentistry
-
MATSUMURA Hideo
Department of Fixed Prosthodontics, Nihon University School of Dentistry
-
TANOUE Naomi
Department of Specialized Dentistry, Nagasaki University Hospital of Medicine and Dentistry
-
NISHIYAMA Norihiro
Department of Dental Material, Nihon University School Dentistry at Matsudo
-
Matsumura H
Department Of Fixed Prosthodontics Nihon University School Of Dentistry
-
Nishiyama Norihiro
Dep. Of Dental Biomaterials Res. Inst. Of Oral Sci. Nihon Univ. School Of Dentistry At Matsudo
-
Koizumi H
Department Of Fixed Prosthodontics Nihon University School Of Dentistry
-
Tanoue N
Nagasaki University Hospital
-
ISHIKAWA Yumi
Department of Fixed Prosthodontics, Nihon University School of Dentistry
-
OHASHI Norihisa
Department of Fixed Prosthodontics, Nihon University School of Dentistry
関連論文
- Effect of preliminary irradiation on the bond strength between a veneering composite and alloy
- Evaluation of single liquid primers with organic sulfur compound for bonding between indirect composite material and silver-palladium-copper-gold alloy
- Effects of Monomer Composition and Original Filler Content on Filler Loading in the Resulting Centrifuged Composites
- Effects of Silane Coupling Agent Amount on Mechanical Properties and Hydrolytic Durability of Composite Resin After Hot Water Storage
- Effect of alumina air-abrasion on mechanical bonding between an acrylic resin and casting alloys
- Bond Strength to Primed Ti-6Al-7Nb Alloy of Two Acrylic Resin Adhesives
- Color Stability of Acrylic Resin Adhesives with Different Initiation Modes
- Marginal and Internal Adaptation of Zirconium Dioxide Ceramic Copings and Crowns with Different Finish Line Designs
- Development of dual-curing type experimental composite resin cement for orthodontic bonding : Effect of additional amount of accelerators on the mechanical properties
- Effects from Applying Adhesive Agents onto Silanated Porcelain Surface on the Resin Bond Durability
- Effect of Solvent Type on the Degradation of 4-MET
- NMR Study on the Adhesion Efficacy of Experimental Phosphonic Acid Monomers
- 大地と水の下で--エルクホーン市のためのプロジェクト
- Effect of 4-MET- and 10-MDP-based Primers on Resin Bonding to Titanium
- Effect of preliminary irradiation on depth of cure and hardness of a veneering composite
- Comparative Evaluation of Thione and Phosphate Monomers on Bonding Gold Alloy and Ti-6Al-7Nb Alloy with Tri-n-butylborane initiated Resin
- Bond strength to bovine dentin of a composite core build-up material combined with four different bonding agents
- Effect of Metal Priming Agents on Bond Strength of Resin-modified Glass Ionomers Joined to Gold Alloy
- Effect of single-liquid priming agents on adhesive bonding to aluminum oxide of a methacrylic resin.
- Relation between Attractive Force and Keeper Surface Characteristics of Iron-neodymium-boron Magnetic Attachment Systems
- Effect of a Metal Priming Agent on Wear Resistance of Gold Alloy-indirect Composite Joint
- Depth of cure and hardness of an indirect composite polymerized with three laboratory curing units
- Effects of alumina air-abrasion and acidic priming agents on bonding between SUS XM27 steel and auto-polymerizing acrylic resin
- Effect of metal priming agents on bonding characteristics of an acrylic resin joined to SUS XM27 steel
- Effect of Acidic Primers on Bonding Three Magnetic Steel Alloys with Tri-n-butylborane Initiated Methacrylic Resin
- Properties of an Indirect Composite Material Polymerized with Two Different Laboratory Polymerizing Systems
- A New Laboratory Polymerizing Apparatus Equipped with Halogen and Metal Halide Light Sources
- Effect of metal halide light source on hardness, water sorption and solubility of indirect composite material
- Effect of noble metal adhesive systems on bonding between an indirect composite material and a gold alloy
- Fabrication of a maxillary posterior fixed partial denture with a type 4 gold alloy and a dual-polymerizing indirect composite
- A Nine-year Follow-up of a Porcelain Laminate Veneer Restoration Applied to an Adolescent with Traumatized Dentition : A Clinical Report
- International telephone code used for citizenship identification in a denture
- Application of a pre-impregnated fiber-reinforced composite in the fabrication of an indirect dowel-core
- Influence of Centrifugal Force on Filler Loading of Resin Composites
- Porcelain laminate veneer restorations bonded with a three-liquid silane bonding agent and a dual-activated luting composite
- Twenty-four Hour Bond Strength Between Layers of a Highly Loaded Indirect Composite
- Effect of Single-liquid Acidic Primers on Bonding of a Composite Luting Agent Joined to a Prefabricated Alumina Coping Material
- Development of Bonding System for Resin Core Construction by MωA Adhesive
- Effect of acidic primers on adhesive bonding of tri-n-butylborane initiated adhesive resin to alumina
- Evaluation of thiouracil-based adhesive systems for bonding cast silver-palladium-copper-gold alloy
- P-Glycoprotein Mediates Efflux Transport of Darunavir in Human Intestinal Caco-2 and ABCB1 Gene-Transfected Renal LLC-PK1 Cell Lines
- Effectiveness of Bonding Systems on Bonding Durability of a Prefabricated Porcelain Material
- A Simplified Numerical Simulation Method of Bending Properties for Glass Fiber Cloth Reinforced Denture Base Resin
- Effect of Hydrofluoric Acid Etching on Shear Bond Strength of an Indirect Resin Composite to an Adhesive Cement
- Bending Property of Super-Elastic Ti-Ni Alloy Dental Castings with Different Heat Treatments
- Adhesion of Restorative Resin to Teeth: Effects of Functional Groups of Dentin Primer to Collagen
- Effects of Heat arid pH in Silanation Process on Flexural Properties and Hydrolytic Durabilities of Composite Resin after Hot Water Storage
- Effect of Base Monomer's Refractive Index on Curing Depth and Polymerization Conversion of Photo-cured Resin Composites
- Effects of sintered apatite on bone regeneration in rabbits
- Effect of Varying HAP/TCP Ratios in Tape-cast Biphasic Calcium Phosphate Ceramics on Response in vitro
- Influence of Laboratory Light-curing Unit Variation on Properties of Prosthetic Composites
- Marginal Fit and Microgaps of Implant-abutment Interface with Internal Anti-rotation Configuration
- Effects of IL-6 and Soluble IL-6 Receptor on the Expression of Cartilage Matrix Proteins in Human Chondrocytes
- Research Projects on Materials and Devices Published in 2005 by Members of the Japan Prosthodontic Society : A Review
- Influence of Abutment Materials on the Resultant Color of Heat-pressed Lithium Disilicate Ceramics
- Evaluation of two dual-functional primers and a tribochemical surface modification system applied to the bonding of an indirect composite resin to metals
- CHEMICAL SHIFT OF OH PROTONS OF ALKYLPHENOLS IN CARBON TETRACHLORIDE ETHYL ACETATE MIXED SOLVENT IN PRESENCE OF CADMIUM NITRATE
- Current bonding systems for resin-bonded restorations and fixed partial dentures made of silver-palladium-copper-gold alloy
- Influence of laboratory light sources on the wear characteristics of indirect composites
- Effect of Surface Treatments on Repair Bond Strength of Aged Light Polymerizing Indirect Composites
- Color Stability of an Indirect Composite Polymerized with Two Different Laboratory Polymerization Systems
- Influence of Laboratory Procedure on Attractive Force of Magnetic Attachment Systems
- Effect of Varying Polymerization Modes on Flexural Strength of an Indirect Composite Reinforced with a Monomer-Impregnated Glass Fiber Material
- Effect of Noble Metal Conditioner on Wear Resistance of Composite-to-metal Bonded Specimens
- A Centrifugal Light-polymerizing Apparatus Designed for Preparation of Highly Filled Nano-composites
- Effect of Single-liquid Acidic Primers on Bonding of a Composite Luting Agent Joined to a Prefabricated Alumina Coping Material
- A nine-year clinical case study of a resin-bonded fixed partial denture seated on the maxillary anterior teeth.