Nanometer Electrode Fabrication Technology Using Anodic Oxidation Resist and Application to Unidirectional Surface Acoustic Wave Transducers
スポンサーリンク
概要
- 論文の詳細を見る
Nanometer lithography technology is very important for high density integrated circuits and higher-frequency-range surface acoustic wave (SAW) devices. The frequency ranges of SAW devices extend to around 10 GHz ; therefore a sub-micron technology below 0.1 μm is required. In this paper, we propose new lithography techniques for nanometer fabrication using very thin anodic oxidation films. Since very thin resists (less than 50 nm) can be used in this process, a narrow resist pattern and electrodes can be obtained. The results show the 75 nm width of an interdigital transducer (IDT) made of aluminum with thickness of 30 nm on 128° Y-X LiNbO_3. SAW experimental results show the 17 GHz-range characteristics. Also, new lithography technologies are applied to 2 GHz low-loss filters unidirectional transducer.
- 社団法人応用物理学会の論文
- 1994-05-30
著者
-
ODAGAWA Hiroyuki
Research Institute of Electrical Communication, Tohoku University
-
Meguro Toshiyasu
Research Institute Of Electrical Communication Tohoku University
-
Meguro T
Research Institute Of Electrical Communication Tohoku University
-
Yamanouchi Kazuhiko
Research Institute Of Electrical Communication Tohoku University
-
Wagatsuma Y
Research Institute Of Electrical Communication Tohoku University
-
Wagatsuma Yasuo
Research Institute Of Electrical Communication Tohoku University
-
YAMAMOTO Keiichi
Research Institute of Electrical Communication, Tohoku University
-
Odagawa Hiroyuki
Research Institute Of Electrical Communication Tohoko University
-
Yamamoto Keiichi
Research Institute Of Electrical Communication Tohoku University
関連論文
- Fundamental Study on Nano Domain Engineering Using Scanning Nonlinear Dielectric Microscopy
- New Functions of Scanning Nonlinear Dielectric Microscopy -Higher-Order Measurement and Vertical Resolution-
- Measurement of the Ferroelectric Domain Distributions Using Nonlinear Dielectric Response
- Theoretical and Experimental Study on Nanoscale Ferroelectric Domain Measurement Using Scanning Nonlinear Dielectric Microscopy
- Determination of the Polarities of ZnO Thin Films on Polar and Nonpolar Substrates Using Scanning Nonlinear Dielectric Microscopy
- Quantitative Measurement of Linear and Nonlinear Dielectric Characteristics Using Scanning Nonlinear Dielectric Microscopy
- Theoretical Analysis of Surface Acoustic Wave Propagation Characteristics under Strained Media and Applications for High Temperature Stable High Coupling Surface Acoustic Wave Substrates
- Factors Influencing the Variation of Surface Acoustic Wave Velocity in Lithium Tetraborate
- Consideration of Small Variation of Surface Acoustic Wave (SAW) Velocity in Lithium Tetraborate
- Observation of Ultrathin Single-Domain Layers Formed on LiTaO_3 and LiNbO_3 Surfaces Using Scanning Nonlinear Dielectric Microscope with Submicron Resolution
- Simultaneous Observation of Ferroelectric Domain Patterns by Scanning Nonlinear Dielectric Microscope and Surface Morphology by Atomic Force Microscope
- Humidity Sensitivity of Lamb Waves on Composite Polyimide/ZnO/Si_3N_4 Structure
- Wide Bandwidth Low Loss Filters Using Piezoelectric Leaky SAW Unidirectional Transducers with Floating Electrodes : SAW and Communication Devices
- UHF-Range Positive/Negative Reflection Type SAW Resonators on LiNbO_3 Using New Fabrication Techinique : SAW and BAW Materials, Devices and Theories
- GHz-Range Conventional λ/4 Unidirectional Surface Acoustic Wave Transducers and Their Application to Low-Loss and Zero-Temperature Coefficient Filters
- Phase Modulation of the Light Wave Propagating in an Optical Fiber by Acoustic Waves
- Nanometer Electrode Fabrication Technology Using Anodic Oxidation Resist and Application to Unidirectional Surface Acoustic Wave Transducers
- Waveguide-Type Multifrequency Acoustooptic Modulators
- 10 GHz-Range Surface Acoustic Wave Low Loss Filter Measured at Low Temperature
- Surface Acoustic Wave Paramagnetic Resonance in Iron Doped-LiNbO_3 : Physical Acoustics
- A Surface Acoustic Wave Elastic Convolver using a KNbO_3 Single Crystal Substrate
- 10 GHz Range Low-Loss Ladder Type Surface Acoustic Wave Filter
- 5 GHz Range Low-Loss Wide Band Surface Acoustic Wave Filters Using Electrode Thickness Difference Type Unidirectional Transducers
- Excitation of Surface Acoustic Waves Using Electron Acoustic Microscope : Ultrasonic Imaging and Microscopy
- New Types of SAW Reflector and Resonator Consisting of Reflecting Elements with Alternative(Positive and Negative) Reflection Coefficients : SAW and Communication Devices
- GHz-Range Unidirectional Low-Loss SAW Filters and Fine Lithograrphy Technology
- Theoretical Analysis of Comb Transducers for Surface Acoustic Waves : Surface Acoustic Waves and Devices
- 10 GHz Surface Acoustic Wave Filters with Narrow-Gap Interdigital Transducer Structure
- Low-Loss Surface Acoustic Wave Filter on Natural-Single Phase Unidirectional Transducter Orientations of a Li_2B_4O_7 Substrate
- Superhigh Electromechanieal Coupling and Zero-Temperature Characteristics of KNbO_3 and Wide Band Filter Applications
- Research of Super-High Electromechanical Coupling Surface Acoustic Wave Substrates
- Three-Dimensional Measurement for Absolute Value of Polarization Angle by Scanning Nonlinear Dielectric Microscopy
- A Study on the Scalar Wave Equation for Nonlinear Surface Acoustic Wave Distortion
- Group-type Unidirectional Acoustic Surface Wave Filters Using Distance Weighting Techniques : Communication Devices and Materials
- Surface Acoustic Wave Propagation Characteristics under the Coded Electrodes of Surface Acoustic Wave Matched Filters
- Ultrasonic Micromanipulator Using Visual Feedback
- Transduction Characteristics of a Surface Acoustic Wave Unidirectional Interdigital Transducer with Liquid Loading
- Ultrasonic Micromanipulation of Small Particles in Liquid
- Multi-Step Function MOS Transistor Circuits (Special Issue on Multiple-Valued Integrated Circuits)
- N-Channel Metal-Oxide-Semiconductor Device with the Step-Functional I-V Curves Caused by the Punch-Through between Drain and Inversion Layer of the Gate
- Metal-Oxide-Semiconductor Field-Effect-Transistors Possessing Step Functional I-V Curves Caused by the Punch Through between Drain and Inversion Layer of the Gate
- Ferroelectric Single Crystal Recording Media Fabricated by Polarization Controlled Wet Etching Process
- Research of Super-High Electromechanical Coupling Surface Acoustic Wave Substrates
- Ultrahigh-Density Ferroelectric Data Storage Using Scanning Nonlinear Dielectric Microscopy
- Fundamental Study on Nano Domain Engineering Using Scanning Nonlinear Dielectric Microscopy
- New Functions of Scanning Nonlinear Dielectric Microscopy —Higher-Order Measurement and Vertical Resolution—
- Simultaneous Observation of Ferroelectric Domain Patterns by Scanning Nonlinear Dielectric Microscope and Surface Morphology by Atomic Force Microscope
- UHF range surface acoustic wave filters using uni-directional interdigital transducers.