Firing Shrinkage of Porcelain-resin Composites Prepared by Laser Lithography
スポンサーリンク
概要
- 論文の詳細を見る
Using porcelain and resin-mixed composites as experimental materials, cubic polymerized composites were prepared by the accumulation of thin slices cured by laser scanning. The composites were then fired, and bulk ceramic bodies were made. The optimal firing conditions of polymerized composites and firing shrinkage were investigated. The results showed that cubic ceramic bodies in a form homologous to that before firing could be reproduced. The volume shrinkage of fired ceramic bodies consisting of 1 g of ceramic powders and 0.3 g of epoxy resin was about 30% under all firing conditions, and there were no significant differences between specimens. It was suggested that with further research and development, three-dimensional forms for clinical use in dentistry could be manufactured by the proposed method.
- 日本歯科理工学会の論文
著者
-
Watari Fumio
Hokkaido Univ. Sapporo Jpn
-
Watari Fumio
北海道大学 エネルギー変換マテリアル研究センター
-
Watari Fumio
Department Of Oral Health Science Graduate School Of Dental Medicine Hokkaido University
-
Watari F
Hokkaido Univ. Sapporo Jpn
-
Watari Fumio
北海道大学 歯研究 口腔機能
-
Watari Fumio
Department Of Applied Science Faculty Of Engineering
-
Ueda Yasuo
Dept. Of Oral Functional Science Graduate School Of Dental Medicine Hokkaido University
-
Satoh Noriyuki
Department of Biology, Niigata University
-
Sato Noriyuki
Dept. Of Oral Health Science Graduate School Of Dental Medicine Hokkaido University
-
Ueda Yasuo
Department Of Oral Functional Science Hokkaido University Graduate School Of Dental Medicine
-
Ohata Noboru
Department of Prosthetic Dentistry II, School of Dentistry, Hokkaido University
-
Ohata Noboru
Department Of Oral Functional Science Hokkaido University Graduate School Of Dental Medicine
-
MATSUO Shingo
Department of Oral Functional Science, Graduate School of Dental Medicine, Hokkaido University
-
YORIMOTO Takumi
Department of Crown and Bridge Prosthodontics, Hokkaido University School of Dentistry
-
AITA Hideki
Department of Crown and Bridge Prosthodontics, Hokkaido University School of Dentistry
-
Ohata Noboru
Dept. Of Oral Functional Science Graduate School Of Dental Medicine Hokkaido University
-
Aita Hideki
Department Of Oral Functional Science Hokkaido University Graduate School Of Dental Medicine
-
Matsuo Shingo
Department Of Oral Functional Science Graduate School Of Dental Medicine Hokkaido University
-
Matsuo Shingo
Department Of Food Science And Technology Tokyo University Of Fisheries
-
Satoh Noriyuki
Department Of Biology Niigata University
-
Yorimoto T
Hokkaido Univ. Hospital Sapporo Jpn
-
Ohata Noboru
Department Of Oral Functional Science Graduate School Of Dental Medicine Hokkaido University
-
Ueda Yasuo
Department Of Chemistry Faculty Of Science Osaka University:osaka Titanium Co. Ltd.
関連論文
- Strong adhesion of Saos-2 cells to multi-walled carbon nanotubes
- Development of a 3D collagen scaffold coated with multiwalled carbon nanotubes
- Multiwalled carbon nanotube coating on titanium
- Multiwalled Carbon Nanotube Monoliths prepared by Spark Plasma Sintering (SPS) and their Mechanical Properties
- 3D collagen scaffolds coated with multiwalled carbon nanotubes : Initial cell attachment to internal surface
- A-9 Chitosan/BSA micropatterns on Titanium Surfaces by Functionization and Soft Lithography
- XAFS Analysis of Ti and Ni Dissolution from Pure Ti, Ni-Ti Alloy, and SUS304 in Soft Tissues
- Chromatography of carbon nanotubes separated albumin from other serum proteins : a method for direct analysis of their interactions
- SOME CYTOLOGICAL ASPECTS OF THREE SPECIES OF BEETLES
- AFM and SEM Observation of Morphological Changes of Human Dentin Surface by Treatment of Acidic Agents
- A cDNA project of Ciona intestinalis(II)(Developmental Biology)Proceedings of the Seventy-First Annual Meeting of the Zoological Society of Japan
- Preface
- X-ray Absorption Fine Structure Studies on the Local Structures of Ni Impurities in a Carbon Nanotube
- Development of a multiwalled carbon nanotube coated collagen dish
- Behavior of in vitro, in vivo and internal motion of micro/nano particles of titanium, titanium oxides and others( Ceramics for Biomedical Applications in Asian Countries)
- X-ray Absorption Fine Structure (XAFS) Analysis of Titanium-implanted Soft Tissue
- Analysis of Titanium Dental Implants Surrounding Soft Tissue Using X-ray Absorption Fine Structure (XAFS) Analysis
- Effects of Particle Size on Cell Function and Morphology in Titanium and Nickel
- A sea urchin homologue of mouse T-brain is expressed in the micromere descendant cells(Developmental Biology)Proceedings of the Seventy-First Annual Meeting of the Zoological Society of Japan
- 8. Regeneratlon of cementum and periodontal ligament by BMP-applied tissue engineering.
- Application of flake shaped glass (Glass Flake®) filler for dental composite resin
- Infrared Absorption Spectra of Molecular Complexes of Pyridine. Part V : Molecular Complexes with Cu-, Co-, Ni- and Mn-Dihalides
- SM50 TRANSCRIPTIONAL REGULATION MECHANISM AND THE EVOLUTION OF SPICULE IN ECHINODERM(Developmental Biology & Physiology)(Proceedings of the Seventy-Third Annual Meeting of the Zoological Society of Japan)
- Fabrication of Titanium Nitride/Apatite Functionally Graded Implants by Spark Plasma Sintering
- High-resolution electron microscopy of multi-wall carbon nanotubes in the subcutaneous tissue of rats
- The Purity and Thermal Stability in Air of Metal-Encapsulating Carbon Nanocapsules (MECNCs)
- Carbon Nanotubes as Scaffolds for Cell Culture and Effect on Cellular Functions
- Strikingly Extended Morphology of Cells Grown on Carbon Nanotubes
- Apatite formation on carbon nanotubes
- Selenium Distribution in Human Soft Tissue Determined by Using X-ray Scanning Analytical Microscope and X-ray Absorption Fine Structure Analysis
- Novel Bulk Carbon Nanotube Materials for Implant by Spark Plasma Sintering
- Rare earth oxide containing fluorescent glass filler for composite resin
- Expression of actin genes in the arrow worm Paraspadella gotoi (Chaetognatha)
- Large-Scale Production of Ba^-Alginate-Coated Vesicles of Carbon Nanofibers for DNA-Interactive Pollutant Elimination
- Implication of Maternal Nitrogen Balance in the Regulation of Circulating Levels of Insulin-Like Growth Factor-I in Human Pregnancy
- Nano-architecture on Carbon Nanotube Surface by Biomimetic Coating
- Fabrication of a Functionally Graded Dental Composite Resin Post and Core by Laser Lithography and Finite Element Analysis of its Stress Relaxation Effect on Tooth Root
- Firing Shrinkage of Porcelain-resin Composites Prepared by Laser Lithography
- Pleiotrophin Regulates Bone Morphogenetic Protein (BMP)-Induced Ectopic Osteogenesis
- Application of Three-dimensional Haptic Interface Technology in Dentistry : Virtual Waxing Up
- Mechanical Properties of Surface Nitrided Titanium for Abrasion Resistant Implant Materials
- Surface Properties and Biocompatibility of Nitrided Titanium for Abrasion Resistant Implant Materials
- Spatio-temporal expression patterns of eight epidermis-specific genes in the ascidian embryo
- The ascidian embryo: An experimental system for studying genetic circuitry for embryonic cell specification and morphogenesis
- Mycoplasmal Lipoproteins Induce Toll-Like Receptor 2- and Caspases-Mediated Cell Death in Lymphocytes and Monocytes
- Signaling Pathways Induced by Lipoproteins Derived from Mycoplasma salivarium and a Synthetic Lipopeptide (FSL-1) in Normal Human Gingival Fibroblasts
- 6-Phosphogluconate Dehydrogenase Is a 45-kDa Antigen Recognized by S4D5,a Monoclonal Antibody Specific to Vanadocytes in the Vanadium-Rich Ascidian Ascidia sydneiensis samea
- Extractive Components of the Squid Ink
- Taste Components of Boreo Pacific Gonate Squid Gonatopsis borealis
- Chemotactic Response of Periodontal Ligament Cells toward rhBMP-2
- Effects of mechanical stress on the eryression of type XII collagen mRNA in human periodontal ligament cells
- Chemotactic Response of Periodontal Ligament Cells toward rhBMP-2
- ISOLATION OF THE PHARYNGEAL GILL-SPECIFIC GENES FOR ASCIDIAN CIONA INTESTINALIS BASED ON THE MULTIPLE WISH ANALYSIS(Taxonomy and Systematics,Abstracts of papers presented at the 74^ Annual Meeting of the Zoological Society of Japan)
- Imaging and Non-Contact Profile Analysis of Nd : YAG Laser-Irradiated Teeth by Scanning Electron Microscopy and Confocal Laser Scanning Microscopy
- Temperature-dependence of the Mechanical Properties of FRP Orthodontic Wire
- 86 Cloning and Characterization of 8-oxoguanine DNA glycosylase activity in Ciona intestinalis(Repair of radiation damage, Abstracts of the 46th Annual Meeting of the Japan Radiation Research Society)
- Development of New Dental Materials by Combining Substances with Varying Properties
- Phylogenetic Position of Acoel Turbellarians Inferred from Partial 18S rDNA Sequences
- In-situ etching observation of human teeth in acid agent by atomic force microscopy
- XAFS Analysis of the Bronchoalveolar Lavage Fluid of a Tungsten Carbide Pneumoconiosis Patient
- Inflammatory Exudates Modulate the Function and Apoptosis of Neutrophils
- Toxicity evaluations of various carbon nanomaterials
- Distortion of Laser Welded Titanium Plates
- Laser Welding of Titanium and Dental Precious Alloys
- Slip Casting of Titanium Powder for Dental Prosthetic Appliances
- Non-Contact Surface Morphology Analysis of CO_2 Laser-Irradiated Teeth by Scanning Electron Microscope and Confocal Laser Scanning Microscope
- Fluorescent Properties of Porcelain-Restored Teeth and Their Discrimination
- Discrimination between Composite Resin and Teeth using Fluorescence Properties
- Effect of surface condition of dental zirconia ceramic (Denzir) on bonding
- Surface analysis of dental amalgams by X-ray photoelectron spectroscopy and X-ray diffraction
- Toxicity evaluations of various carbon nanomaterials
- Phase transformation of zirconia ceramics by hydrothermal degradation
- Genetic Relatedness and Variability in Inbred and Wild Populations of the Solitary Ascidian Ciona intestinalis Revealed by Arbitrarily Primed Polymerase Chain Reaction
- Involvement of Rel/NF-κB in regulation of ascidian notochord formation
- Isolation and characterization of cDNA clones for epidermis-specific and muscle-specific genes in Ciona savignyi embryos
- A TWIST-LIKE bHLH GENE IS A DOWNSTREAM FACTOR OF AN ENDOGENOUS FGF AND DETERMINES MESENCHYMAL FATE IN THE ASCIDIAN EMBRYOS(Developmental Biology,Abstracts of papers presented at the 74^ Annual Meeting of the Zoological Society of Japan)
- A cDNA project of Ciona intestinalis (I)(Developmental Biology)Proceedings of the Seventy-First Annual Meeting of the Zoological Society of Japan
- Sequence motifs shared by the 5' flanking regions of two epidermis-specific genes in the ascidian embryo
- Density Functional Theory Study on the Water Clusters on Graphene Chip
- Structures and Electronic States of Water Molecules on Graphene Surface: A Density Functional Theory Study
- A case of skeletal class III malocclusion with severe open bite treated by combined Le Fort I and sagittal split ramus osteotomy
- Modeling of the range of mandibular movements by laser lithography : The range of mandibular movements at the incisal point and condylar paths
- A single-dose regimen for antimicrobial prophylaxis to prevent perioperative infection in urological clean and clean-contaminated surgery
- Phase transformation of zirconia ceramics by hydrothermal degradation
- Toxicity evaluations of various carbon nanomaterials
- Osteoblastic cellular responses to aluminosilicate nanotubes, imogolite using Saos-2 and MC3T3-E1 cells
- Thin films of single-walled carbon nanotubes promote human osteoblastic cells (Saos-2) proliferation in low serum concentrations
- Carbon nanotube-coated silicone as a flexible and electrically conductive biomedical material
- GENES INVOLVED IN EARLY DEVELOPMENT OF ANIMALS
- The bactericidal effect of carbon nanotube/agar composites irradiated with near-infrared light on Streptococcus mutans
- Modification of the dentin surface by using carbon nanotubes.
- Adhesion of human osteoblast-like cells (Saos-2) to carbon nanotube sheets.
- Interaction of Water Molecules with Graphene: A Density Functional Theory and Molecular Dynamics Study
- An Evaluation of Fluorescent Orthodontic Adhesives Containing Eu-doped ZnO at Room Temperature
- Introduction of Rare-Earth-Element- Containing ZnO Nanoparticles into Orthodontic Adhesives
- Evaluation of Protein Adsorption to Carbon Nanotubes having Different Property, and Identification of Adsorbed Proteins
- Effect of Pretreatments to Carbon Nanotubes on Protein Adsorption
- Carbonate Ion Induced Calcification Using Biomimetic Enzymes with Active Reaction Center of Carbonc Anhydrase
- Evaluation of Adhesion between Material and Epithelium using a Three-dimensional Human Epidermal Model
- A Novel Approach for Direct Observation of Biodistribution of Water-soluble Carbon Nanotubes in Mice