A Synthesis of Robotic Pantograph Mechanisms based on Working Spaces and Static Characteristic Charts

スポンサーリンク

概要

• 論文の詳細を見る

• Kinematic and static characteristics of pantograph mechanisms have been analyzed and represented in the form of charts which enable rational syntheses of the mechanisms as robot arms and legs with two degrees of freedom. Namely, the maximum joint forces and bending moments of links when the mechanisms take arbitrary positions and attitudes have been formuiated by introducing two factors. Characteristic charts of statics have been made by plotting lines of positions of the output point where both of the factors are respectively constant in dimensionless working spaces. Making use of the characteristic charts, shapes and dimensions of working spaces, load conditions, strokes and arrangement positions of actuators etc. can be directly considered in the determination of kinematic parameters of the robot mechanisms with the optimum joint forces and bending moments of links.

• 一般社団法人日本機械学会の論文
• 1991-06-15

著者

• Horie Mikio

  Tokyo Institute Of Technology

• Horie M

  Tokyo Inst. Technol. Kanagawa Jpn

• FUNABASHI Hiroaki

  Tokyo Institute of Technology

• Tachiya H

  Kanazawa Univ. Ishikawa Pref. Jpn

• TACHIYA Hiroshi

  Kanazawa University

• TANIO Satoshi

  Canon Co., Ltd.

• Funabashi Hiroaki

  Tokyo Institute Of Techinology

• Tanio Satoshi

  Canon Co. Ltd.

関連論文

• A Synthesis of Planar Mechanisms with Pairs of Optimum Tolerances
• A Displacement Analysis of Overconstrained Mechanisms
• A Systematic Synthesis of the Layer Arrangements of Planar Mechanisms
• Research into the Layer Arrangements of Six-Bar Mechanisms : Series C : Vibration, Control Engineering, Engineering for Industry
• Dynamic Characteristics of Planar Link Mechanisms with Clearances During Accelerated and Decelerated Motions : Series C : Vibration, Control Engineering, Engineering for Industry
• A Kineto-Elastodynamic Analysis of Planar Link Mechanisms with Three-Dimensional Offsets and Clearances : Vibration, Control Engineering, Engineering for Industry
• Dynamic Characteristics of Plane Link Mechanisms with Clearances : Restraint of Separation between Pairing Elements
• Dynamic Characteristics of Planar Link Mechanisms with Clearances : Conditions of Separation Occurrence between Pairing Elements
• A Displacement Analysis of Spatial Four-Bar Mechanisms with Clearances and Tolerances
• A Displacement Analysis of Plane Multilink Mechanisms with Clearances and Tolerances
• A Dynamic Analysis of the Plane Crank-and-Rocker Mechanisms with Clearances
• A Dynamic Analysis of Mechanisms with Clearances
• Networking and Information Distribution in Robots Composed of Identical Units
• Development of Spatial Parallel Manipulators with Six Degrees of Freedom
• Synthesis of Leg-Mechanisms of Biped Walking Machines : Part I, Synthesis of Ankle-Path-Generator
• Dynamic Characteristics of Non-Uniform Motion Mechanisms with Ball Bushings : 1st Report, On the Friction of Ball Bushings and Dynamic Characteristics of Mechanisms
• On the Number of Conditions in the Syntheses of Spatial Four-Bar Mechanisms
• On the Rotational Conditions of the Spatial Four-Bar Mechanisms
• On the Profiles of Bands in the Rolamites
• A Synthesis of Robotic Pantograph Mechanisms based on Working Spaces and Static Characteristic Charts
• Dynamic Characteristics of Non-Uniform Motion Mechanisms with Ball Bushings : 2nd Report, On the Circulation of Balls and the Dynamic Characteristics of Mechanisms
• Synthesis of Spatial Four-Bar Mechanisms : Part I, Classification of Mechanisms and Synthesis of a Mechanism with Two Revolute Pairs, One Cylindric pair and One Spheric Pair
• Synthesis of Spatial Four-Bar Mechanisms : Part II, Synthesis of Mechanisms with Two Spheric Pairs
• Systematic Analyses of Velocity, Acceleration and Force of Planar Multilink Mechanisms
• A Systematic Analysis of Planar Multilink Mechanisms
• Synthesis of Leg-Mechanisms of Biped Walking Machines : Part II, Synthesis of Foot-Driving Mechanism
• On Transient Walks of a Biped Walking Machine (1st Report, Motions of Leg Mechanisms) : Series C : Vibration, Control Engineering, Engineering for Industry
• A Synthesis of Crank-length Adjusting Mechanisms
• A Kineto-elastodynamic Analysis of Planar Link Mechanisms with Consideration of Bearing Clearances
• On the Control of Attitude of Biped Locomotion by Linear-Motion Balancer
• Kinematic Analysis of Stephenson Six-Link Mechanisms : 2nd Report, Index of Motion-Transmission Characteristics
• On the Envelope Curves of the Coupler Lines of Plane Four-Bar Mechanisms : 1st Report, Synthesis of Mechanism
• Kinematic Analysis of Stephenson Six-Link Mechanisms : 1st Report, Discrimination of Composition Loops
• Synthesis of Plane Six-Link Mechanisms Using the Monte Carlo Method
• On the Envelope Curves of the Coupler Lines of Plane Four-Bar Mechanisms : 2nd Report, Analysis of Singularity and Accuracy of the Envelope curves
• A Dynamic Synthesis of Non-uniform Motion Mechanisms
• On the Design of Planar Mechanisms with Consideration of Interferences of Moving Links
• On the Positioning by a Linear Induction Motor

もっと見る 閉じる

スポンサーリンク