小型直接噴射式ディーゼル機関の排出未燃分および微粒子の特性 : 第1報, 圧縮端温度・圧力の影響

概要

論文の詳細を見る
In a small direct injection diesel engine, the distance between the injection nozzle and the combustion chamber wall is short owing to the small cavity diameter. As the result, much fuel spray impinges on the chamber wall and the hydrocarbon (HC) and soluble organic fraction (SOF) increase at light loading conditions. In this paper the changes of the emission characteristics with increasing temperature or pressure at the compression end by using the combustion chamber materials with low thermal conductivity and the higher compression ratio were investigated. It is clear that these factors are effective in reducing the unburnt emissions at light load, however, the smoke density deteriorates at heavy load by the change of combustion pattern. In this study, the chemical analysis of unburnt HC and SOF components were done with the gas chromatograph. It was found that the correlation between HC and SOF is strong at light load but week at heavy load due to the difference of the boiling range of these unburnt components at each load.
社団法人日本機械学会の論文
1998-12-25