Piston Temperature of Automobile Gasoline Engine in Driving on the Road
スポンサーリンク
概要
- 論文の詳細を見る
A new linkage device has been developed for the measurement of piston temperatures in high speed engines with a high degree of accuracy and long durability. The piston temperatures have been successfully measured under various driving conditions on ordinary roads by this device. As a result of comparing these temperatures with the laboratory ones we reached the following conclusion : i) During driving, piston tmeperatures fluctuate, responding rapidly to changes in engine conditions. The temperatures change frequently and large over a range of 100℃, particularly on highways.ii) During acceleration, the longer the "knock" persists, the more the temperature rises. In this case, the highest temperature recorded is about 340℃.iii) Generally, the temperatures obtained nearly steady state conditions on the road agree well with those obtained in the laboratory.
- 一般社団法人日本機械学会の論文
著者
-
ENOMOTO Yoshiteru
Musashi Institute of Technology
-
Furuhama Shoichi
Musashi Institute Of Technology
-
Furuhama Shoichi
Musashi Institute Of Technolog.
関連論文
- Heat Transfer Characteristics of a Diesel Spray Impinging on a Wall
- Heat loss to combustion chamber wall in a D.I.diesel engine-First report:Tendency of heat loss to piston surface
- Direct Heat Loss to Combustion Chamber Walls in a Direct-injection Diesel Engine : Evaluation of Direct Heat Loss to Cylinder Liner Wall
- Temperature Measurement in Thin-wall Ceramic Catalytic Substrates for D.I. Diesel Engines : Development of Fine Gauge Thermocouples and Study of Temperature Detection Performance and Durability
- Heat loss to the combustion chamber wall with deposit in D. I. diesel engine : variation of instantaneous heat flux on piston surface with deposit
- Development of thin film thermocouple for measurement of instantaneous heat flux flowing into the cast iron combustion chamber wall
- Thermal load in D. I. diesel engine under EGR operation-measurements of steady state temperature of combustion chamber wall surface and intake gas temperature
- Analysis of Knock Phenomenon Induced in a Constant Volume Chamber by Local Gas Temperature Measurement and Visualization(Advanced Combustion Technology in Internal Combustion Engines)
- Analysis of Auto-Ignition Induced in a Constant Volume Vessel by Local Gas Temperature Measurement and Visualization(Measurement, Temperature)
- Effect of Enlarged Piston Top-land Clearance on Loc
- Study on Thin Film Thermocouple Measuring Instantaneous Temperature on Surface of Combustion Chamber Wall In Internal Combustion Engine : 2nd Report, Study on Thin Film Thermocouples Embedded in Combustion Chamber Wall
- Heat Loss to Combustion Chamber Wall of 4-Stroke Gasoline Engine : 1st Report, Heat Loss to Piston and Cylinder
- Study on Thin Film Thermocouple for Measuring Instantaneous Temperature on Surface of Combustion Chamber Wall in Internal Combustion Engine
- Heat Transfer to Wall of Ceramic Combustion Chamber of Internal Combustion Engine
- Piston Temperature of Automobile Gasoline Engine in Driving on the Road
- Self-ignition and combustion stability in a methanol fueled low heat rejection ceramic ATAC engine-analysis of cyclic variation at high wall temperatures and lean burn operation
- Heat Loss into Combustion Chamber Wall of 4-stroke Gasoline Engine : 2nd Report, Heat Loss into Cylinder Head, Intake and Exhaust Valves
- Temperature Measurements of the Connecting Rod, Piston Pin and Crankpin Bearing of an Automobile Gasoline Engine
- Piston Temperatures of an Automobile Engine
- Some Measurements of the Piston Temperatures in a Small Type Gasoline Engine
- The Influence of the Combustion Products on the Piston-Ring Wear of a Diesel Engine : 1st Report, Motoring
- The Wear Properties of Piston Rings of an Automobile Gasoline Engine : Experimental Results by Means of R.I. Method
- On the Flow of Gas Through the Piston-Rings : 2nd Report, The Character of Gas Leakage
- On the Flow of Gas Through the Piston-Rings : 1st Report, The Discharge Coefficient and Temperature of Leakage Gas
- A Dynamic Theory of Piston-Ring Lubrication : 3rd Report, Measurement of Oil Film Thickness
- A Dynamic Theory of Piston-Ring Lubrication : 2nd Report, Experiment
- Tribology on Reciprocating Internal Combustion Engines
- The Influence of the Combustion Products on the Piston-Ring Wear of a Diesel Engine : 2nd Report, Firing
- Temperature Distribution of Piston Rings and Piston in High Speed Diesel Engine
- A Dynamic Theory of Piston-Ring Lubrication : 1st Report, Calculation
- Scavenging Characteristics and Supercharging Effects of Two-stroke Hydrogen Injection Engine
- A Study of the Oil Loss through the Piston
- A Study on Valve Recession Caused by Non-leaded Gasoline : Measurement by means of R. I.
- Effect of the Piston Ring Shape on the Ring-Stick of an Air Cooled 2-Stroke Diesel Engine