The Influence of the Combustion Products on the Piston-Ring Wear of a Diesel Engine : 1st Report, Motoring
スポンサーリンク
概要
- 論文の詳細を見る
A small type Diesel engine is driven by a motor with various μU/W values, then water steam is added to the inlet air, and exhaust gases of the other combustion engine is sucked in. The weight loss of the piston-rings is measured, and the following results have been obtained. (1) When the oil film is thin to a certain extent and at the same time, the combustion products attack on it, the wear is increased greatly ; however, if one of these conditions is absent, the wear becomes very small. (2) When the exhaust gases of the fuel with high sulphur content are sucked in, and the cooling water temperature is low, the engine is corroded very violently by the condensed water, containing the sulfuric acid.
- 一般社団法人日本機械学会の論文
著者
関連論文
- Effect of Enlarged Piston Top-land Clearance on Loc
- Study on Thin Film Thermocouple Measuring Instantaneous Temperature on Surface of Combustion Chamber Wall In Internal Combustion Engine : 2nd Report, Study on Thin Film Thermocouples Embedded in Combustion Chamber Wall
- Heat Loss to Combustion Chamber Wall of 4-Stroke Gasoline Engine : 1st Report, Heat Loss to Piston and Cylinder
- Study on Thin Film Thermocouple for Measuring Instantaneous Temperature on Surface of Combustion Chamber Wall in Internal Combustion Engine
- Heat Transfer to Wall of Ceramic Combustion Chamber of Internal Combustion Engine
- Piston Temperature of Automobile Gasoline Engine in Driving on the Road
- Heat Loss into Combustion Chamber Wall of 4-stroke Gasoline Engine : 2nd Report, Heat Loss into Cylinder Head, Intake and Exhaust Valves
- Temperature Measurements of the Connecting Rod, Piston Pin and Crankpin Bearing of an Automobile Gasoline Engine
- Piston Temperatures of an Automobile Engine
- Some Measurements of the Piston Temperatures in a Small Type Gasoline Engine
- The Influence of the Combustion Products on the Piston-Ring Wear of a Diesel Engine : 1st Report, Motoring
- The Wear Properties of Piston Rings of an Automobile Gasoline Engine : Experimental Results by Means of R.I. Method
- On the Flow of Gas Through the Piston-Rings : 2nd Report, The Character of Gas Leakage
- On the Flow of Gas Through the Piston-Rings : 1st Report, The Discharge Coefficient and Temperature of Leakage Gas
- A Dynamic Theory of Piston-Ring Lubrication : 3rd Report, Measurement of Oil Film Thickness
- A Dynamic Theory of Piston-Ring Lubrication : 2nd Report, Experiment
- Tribology on Reciprocating Internal Combustion Engines
- The Influence of the Combustion Products on the Piston-Ring Wear of a Diesel Engine : 2nd Report, Firing
- Temperature Distribution of Piston Rings and Piston in High Speed Diesel Engine
- A Dynamic Theory of Piston-Ring Lubrication : 1st Report, Calculation
- Scavenging Characteristics and Supercharging Effects of Two-stroke Hydrogen Injection Engine
- A Study of the Oil Loss through the Piston
- A Study on Valve Recession Caused by Non-leaded Gasoline : Measurement by means of R. I.
- Effect of the Piston Ring Shape on the Ring-Stick of an Air Cooled 2-Stroke Diesel Engine