Temperature Measurements of the Connecting Rod, Piston Pin and Crankpin Bearing of an Automobile Gasoline Engine

スポンサーリンク

概要

• 論文の詳細を見る

• The thermocouple wires were led from the connecting rod to the piston through in a coil which received a twisting stress only in the piston pin. From here the wires were led out by means of the"combustion chamber pass through and on the circular spring"method that had been used by the authors. From the measuring results, the followings were found. (i) The heat flow from the piston reaches to the middle part of the connecting rod, at the big end, however, this effect fade away. The temperatures of the crankpin and main bearing metal rise a certain extent above the surroundings by the friction. (ii) These temperatures are increased proportionately with the engine speed. (iii) An increasing the oil temperature increases the temperatures of the bearing-metals as same extent as it.

• 一般社団法人日本機械学会の論文

著者

• Furuhama Shoichi

  Musashi Institute Of Technology

• OYA Yoshitane

  Nissan Motor Co., Ltd.

• SASAKI Hikari

  Musashi Institute of Technology

• Oya Yoshitane

  Nissan Motor Co. Ltd.

• Furuhama Shoichi

  Musashi Institute Of Technolog.

関連論文

• Effect of Enlarged Piston Top-land Clearance on Loc
• Study on Thin Film Thermocouple Measuring Instantaneous Temperature on Surface of Combustion Chamber Wall In Internal Combustion Engine : 2nd Report, Study on Thin Film Thermocouples Embedded in Combustion Chamber Wall
• Heat Loss to Combustion Chamber Wall of 4-Stroke Gasoline Engine : 1st Report, Heat Loss to Piston and Cylinder
• Study on Thin Film Thermocouple for Measuring Instantaneous Temperature on Surface of Combustion Chamber Wall in Internal Combustion Engine
• Heat Transfer to Wall of Ceramic Combustion Chamber of Internal Combustion Engine
• Piston Temperature of Automobile Gasoline Engine in Driving on the Road
• Heat Loss into Combustion Chamber Wall of 4-stroke Gasoline Engine : 2nd Report, Heat Loss into Cylinder Head, Intake and Exhaust Valves
• Temperature Measurements of the Connecting Rod, Piston Pin and Crankpin Bearing of an Automobile Gasoline Engine
• Piston Temperatures of an Automobile Engine
• Some Measurements of the Piston Temperatures in a Small Type Gasoline Engine
• The Influence of the Combustion Products on the Piston-Ring Wear of a Diesel Engine : 1st Report, Motoring
• The Wear Properties of Piston Rings of an Automobile Gasoline Engine : Experimental Results by Means of R.I. Method
• On the Flow of Gas Through the Piston-Rings : 2nd Report, The Character of Gas Leakage
• On the Flow of Gas Through the Piston-Rings : 1st Report, The Discharge Coefficient and Temperature of Leakage Gas
• A Dynamic Theory of Piston-Ring Lubrication : 3rd Report, Measurement of Oil Film Thickness
• A Dynamic Theory of Piston-Ring Lubrication : 2nd Report, Experiment
• Tribology on Reciprocating Internal Combustion Engines
• The Influence of the Combustion Products on the Piston-Ring Wear of a Diesel Engine : 2nd Report, Firing
• Temperature Distribution of Piston Rings and Piston in High Speed Diesel Engine
• A Dynamic Theory of Piston-Ring Lubrication : 1st Report, Calculation
• Scavenging Characteristics and Supercharging Effects of Two-stroke Hydrogen Injection Engine
• A Study of the Oil Loss through the Piston
• A Study on Valve Recession Caused by Non-leaded Gasoline : Measurement by means of R. I.
• Effect of the Piston Ring Shape on the Ring-Stick of an Air Cooled 2-Stroke Diesel Engine

もっと見る 閉じる

スポンサーリンク