Heat Transfer Characteristics of a Diesel Spray Impinging on a Wall

スポンサーリンク

概要

論文の詳細を見る
1995-10-01

著者

関連論文

Piezoreflectance of Rubidium Chloride in the Vacuum Ultraviolet Region from 6 to 30 eV
The 2-D Distribution of Vapor and Liquid Phase Fuel in a DI Diesel Engine Using LIEF
E311 A STUDY ON SOOT BEHAVIOR IN A DI DIESEL COMBUSTION(CI engine combustion/in-cylinder flow)
I204 A STUDY ON MIXTURE FORMATION PROCESS OF DIESEL FUEL SPRAY IN UNSTEADY AND EVAPORATIVE FIELD(Engine spray)
Modeling of Diesel Spray Impinging on Flat Wall
Heat Transfer Characteristics of a Diesel Spray Impinging on a Wall
E107 CONSTRUCTION OF HEAT RECOVERY GENERATION SYSTEM FOR COGENERATION IN COMMERCIAL AND RESIDENTIAL SECTORS(Distributed Energy System-1)
Measurement of fuel vapor concentration in flash boiling spray by infrared extinction/scattering technique
Characteristics of Spray Injected from Gasoline Injector
Droplet Size Distribution in Diesel Fuel Spray : Continued: Effects of Back Pressure and Ambient Density
Droplet Size Distribution in Diesel Fuel Spray
Numerical Analysis of the Deformation Process of a Droplet Impinging upon a Wall
Heat loss to combustion chamber wall in a D.I.diesel engine-First report:Tendency of heat loss to piston surface
Investigation on Combustion in Diesel Engines using a Constant Volume Combustion Chamber : Effect of initial Temperature
Investigation on the Characteristics of Diesel Spray : Shape of Multiple Diesel Sprays and Air Movement between Neighbouring Sprays
Direct Heat Loss to Combustion Chamber Walls in a Direct-injection Diesel Engine : Evaluation of Direct Heat Loss to Cylinder Liner Wall
Temperature Measurement in Thin-wall Ceramic Catalytic Substrates for D.I. Diesel Engines : Development of Fine Gauge Thermocouples and Study of Temperature Detection Performance and Durability
Heat loss to the combustion chamber wall with deposit in D. I. diesel engine : variation of instantaneous heat flux on piston surface with deposit
Development of thin film thermocouple for measurement of instantaneous heat flux flowing into the cast iron combustion chamber wall
Experimental Study on Turbulent Flow in Two-Dimensional Curved Channel : Space/Time Correlations and Spectra of Velocity Fluctuations
Thermal load in D. I. diesel engine under EGR operation-measurements of steady state temperature of combustion chamber wall surface and intake gas temperature
Analysis of Knock Phenomenon Induced in a Constant Volume Chamber by Local Gas Temperature Measurement and Visualization(Advanced Combustion Technology in Internal Combustion Engines)
Analysis of Auto-Ignition Induced in a Constant Volume Vessel by Local Gas Temperature Measurement and Visualization(Measurement, Temperature)
Effect of Enlarged Piston Top-land Clearance on Loc
Study on Thin Film Thermocouple Measuring Instantaneous Temperature on Surface of Combustion Chamber Wall In Internal Combustion Engine : 2nd Report, Study on Thin Film Thermocouples Embedded in Combustion Chamber Wall
Heat Loss to Combustion Chamber Wall of 4-Stroke Gasoline Engine : 1st Report, Heat Loss to Piston and Cylinder
Study on Thin Film Thermocouple for Measuring Instantaneous Temperature on Surface of Combustion Chamber Wall in Internal Combustion Engine
Heat Transfer to Wall of Ceramic Combustion Chamber of Internal Combustion Engine
Piston Temperature of Automobile Gasoline Engine in Driving on the Road
Self-ignition and combustion stability in a methanol fueled low heat rejection ceramic ATAC engine-analysis of cyclic variation at high wall temperatures and lean burn operation
Heat Loss into Combustion Chamber Wall of 4-stroke Gasoline Engine : 2nd Report, Heat Loss into Cylinder Head, Intake and Exhaust Valves
How to Design a Thermoacoustic System Considering the Relaxation Time $\tau$: Introduction of Parameter $\omega\tau$ to Determine the Position of Stack
Effect of Inner Diameter Change of Phase Adjuster on Heat-to-Sound Energy Conversion Efficiency in Loop-Tube-Type Thermoacoustic Prime Mover

もっと見る

スポンサーリンク