曲げ荷重を受けるWC-Co溶射皮膜の割れおよびはく離過程の解析

概要

論文の詳細を見る
In order to analyze the cracking and delamination processes of hard coating on ductile substrate under bending load, four-point bending tests were carried out for tool steel specimens with WC-Co cermet coating. The coating was divided by cracks repeatedly with increase in the bending load, and finally the delamination of coating occurred. The interval of cracks at the same nominal stress and those at the delamination ware large when the coating thickness was large. The stress distribution in the coating was analyzed by two-dimensional elastic-plastic finite element method. In addition, the stress distribution in the coating was calculated also by an elastic-plastic stress analysis, which introduced the tensile stress in the coating σ_<x1>(x)as follows : [numerical formula]where, L is the crack interval, x is distance from the center of divided coating, and α_p and β are constants which contain thickness, material's constant of coating and substrate, and nominal bending stress. The cracking process calculated both by the finite element method and the analytical method agree relatively well with the experimental results.
社団法人日本材料学会の論文
1999-06-15