高圧高速フレーム溶射WC-Co皮膜のはく離強度に及ぼす繰返し面圧の影響(<特集>破壊力学)

概要

論文の詳細を見る
Substrate specimens of mild steel (JIS : SS400) and tool steel (JIS : SKD5) were coated with WC-Co cermet by High-Pressure High-Velocity Oxygen Fuel (HP-HVOF) spraying. Repeating pressure was applied on the surface of the specimens, and tensile tests and edge-indent tests were carried out to evaluate the tensile strength and the delamination strength of the coating. The tensile strength σc of WC-Co coating increases first and then decreases with increasing surface pressure cycles N when the maximum repeating pressure σmax is 240 MPa, while σc increases with increasing N for σmax = 480MPa. Both the interfacial fracture toughness G_<c1/2> and the delamination strength E_d for SS400 specimens decreases with increasing N. On the other hand, E_d for SKD5 specimens does not change with N in each σ_<max>. The SEM micrographs of cross section of coating show the existence of cracks parallel to the interface for SS400 specimens and they are developed with increasing pressure cycles, while the crack extension is small for SKD5 specimens.
社団法人日本材料学会の論文
2002-08-15