Laser Beam Welding of 2205 Duplex Stainless Steel with Metal Powder Additions

スポンサーリンク

概要

• 論文の詳細を見る

• Laser beam welding with the aid of metal powder additions to the weld pool was carried out to modify the ferrite/austenite (α/γ) ratio of the weld metal of 2205 duplex stainless steel (DSS). The α content in the weld metal of DSS welds could be controlled by the proper flow rate of nickel powder through a coaxial nozzle. This process had the advantage of using only a small amount of filler metal, i.e. a few grams per minute of nickel powder, in the welding process. Imapct and notched tensile tests were utilized to evaluate mechanical properties of laser welds. The notched tensile test was also carried out in hydrogen under a slow displacement rate. The susceptibility to hydrogen embrittlement (HE) was estimated from the loss in notched tensile strength and correlated with the microstructure of a given laser weld. On the whole, the susceptibility to HE decreased with increasing the γ content of DSS welds. Autogeneous laser welds containing the highest α content of all welds tested were most susceptible to HE. The base material with banded α+γ structures was susceptible to HE and exhibited severe secondary cracks mainly along α/γ phase boundaries. Although laser welds produced at a flow rate of 3 g/min nickel powder had similar α content to the base material, they were more resistant to HE owing to randomly distributed α and γ phases in the weld metal. The impact energy of laser welds at low temperatures (−75 to −100°C) along with the hardness test could also be used to check if the proper amount of nickel powder was added in laser welding of DSSs.

• 2004-10-15

著者

• Chen C.

  Department Of Aeronautics And Astronautics National Cheng-kung University

• Wu H.

  Department Of Prosthodontics Peking University School And Hospital Of Stomatology

• TSAY L.

  Institute of Materials Engineering, National Taiwan Ocean University

• Tsay L.

  Institute Of Materials Engineering National Taiwan Ocean University

関連論文

• Interaction of a Steady Plasma Stream with a Rotating Dipole Magnetic Field
• Rotational Injection of the Plasma into the TBS Magnetic Field
• On the Region of Adiabatic Confinement of Plasma in the TBS Type Magnetic Field
• The Stability of the High-β Plasma in the TBS-Field about the Cusp-Axis
• Confinement of Plasma by Means of T. B. S. Type Magnetic Field
• Some New Evidence for Polymorphism in Cold-Crystallized and Melt-Crystallized Poly(ether ether ketone)
• Reducing flow induced building vibration by streamlining
• The wind features of Taipei 101 Financial Building
• Confining Region of Plasmas in a TBS-Field on the Cusp-Plane
• Turbulent Heating of Plasma in a TBS-Field
• High Performance Sub-0.1μm Dynamic Threshold MOSFET Using Indium Channel Implantation
• 表面に近い三次元き裂の応力拡大係数におけるVライン応力外挿法の有効範囲(機械工学科,工学部創設40周年記念号)
• The novel method to improve electrical characteristics of p-type GaN by using Ni catalysis
• Nitride-based light emitting diode and photodetector dual function Devices with InGaN/GaN multiple quantum well structures
• Low Temperature Magnetic Study in NiFe-Al-NiFe and Co-Al-NiFe Double Tunneling Junction Devices
• OE-278 Role of SHP2 in Homocystein-induced Epidermal Growth Factor Receptor Transactivation and Endothelin-1 Expression in Aortic Smooth Muscle Cells(Hypertension, basic-1, The 71st Annual Scientific Meeting of the Japanese Circulation Society)
• Stability of UV-Type Two-Domain Wide-Viewing-Angle Liquid Crystal Display
• TED-AJ03-104 A PARALLEL DOMAIN DECOMPOSITION APPROACH FOR SOLVING DIFFUSSION EQUATIONS USING THE METHOD OF FUNDAMENTAL SOLUTIONS
• New Mechanisms and the Characterization of Plasma Charging Enhanced Hot Carrier Effect in Deep-Submicron N-MOSFET's
• STUDYING THE UNSTEADY, THREE-DIMENSIONAL CHARACTERISTICS OF FLOW REATTACHMENT(Separation and Reattachment)
• Selective deposition of gold nanoparticles on the oxide surface of Si nanowire
• Systolic Realization of Cyclic Wavelet Transforms and Cyclic Wavelet Packet Transforms (Special Section on Digital Signal Processing)
• Frequency Dependence of Current Relaxation Time in an Electron-Impurity System
• EDA Gene Mutations Underlie Non-syndromic Oligodontia
• The Development of Oligonucleotide Micro Array Detecting System
• The 1/f^2 Noise Spectrum Derived from Electromigration-Induced Resistance Change
• Laser Beam Welding of 2205 Duplex Stainless Steel with Metal Powder Additions
• Simultaneous determination of imipramine, desipramine and their 2- and 10-hydroxylated metabolites in human plasma and urine by high-performance liquid chromatography
• Determination of naringenin and its glucuronide conjugate in rat plasma and brain tissue by high-performance liquid chromatography
• AC Power Loss and Signal Coupling in Very Large Scale Integration Backend Interconnects
• Laser Welding of 422 Stainless Steel with Inconel 625 Filler Metal
• Modeling of Complex Flows and Heat Transfer
• Long-distance propagation of ionospheric disturbance generated by the 2011 off the Pacific coast of Tohoku Earthquake
• Acoustic resonance and plasma depletion detected by GPS total electron content observation after the 2011 off the Pacific coast of Tohoku Earthquake
• Notched Tensile Fracture of Ti-6Al-4V Laser Welds at Elevated Temperatures
• Experimental and Theoretical Demonstration on the Transport Properties of Fused Ring Host Materials for Organic Light-Emitting Diodes
• HISTOCHEMICAL STUDY ON RIBOFLAVIN
• Refining of Intermediate Transformation Microstructure by Relaxation Processing

もっと見る 閉じる

スポンサーリンク