Seika Masaichiro | Faculty Of Engineering Nagoya University

スポンサーリンク

概要

関連著者

もっと見る

著作論文

Basic Research on Slip-initiation Phenomenon by Fatigue and Its Application to Stress Measurement
Measurement of Cyclic Stresses in High Temperature Range Using Nickel Electroplating : 3rd Report, Application of a Sulfamate Bath
On the Temperature- and cyclic speed-dependence of the Method of Stress Measurement Using Iron-foils
Stress Measurement Using Slip-initiation Phenomenon in Iron Foil
Basic Study on Stress Measurement Using Slip-initiation Phenomenon in Electro-deposited Iron
Measurement of Cyclis Stresses Caused in High Temperature Range by Nickel Electroplating : 4th Report, An Application of Copper Sulfate Bath for the Basal Plating
Basic Study on Foil Strain Gauges Made of Electrodeposited Copper or Nickel
Fundamental Studies on the Copper and Nickel Electroplating Methods of Stress Analysis : Effects of the Ground Plating on the Proper Stress
Dependence of the Threshold Stress of Microcrack Propagation on the Stress Ratio
The Effect of Crack Closure on the Threshold of Micro Fatigue Crack Propagation under Mixed Mode
Photoelastic Study of Stresses in a Cylindrical Pressure Vessel with a Nozzle : 1st Report, Flush Type Nozzle
Measurement of Stress Concentrations in Threaded Connections
Measurement of Cyclic Stresses in High Temperature Range Using Nickel Electroplating : 2nd Report, Examination of Applicable Temperature and Accuracy of Measured Values
Measurement of Cyclic Stresses in High Temperature Range Using Nickel Electroplating : 1st Report, Plating Conditions and Calibration Tests
Fundamental Study on a Foil Strain Gauge of Electrodeposited Nickel
On the Understressing Effect of the Eutectoid Steel
A Study on the Improvement in Sensitivity of Strain Gauges Made of Copper Electrodeposited Foil
The Threshold of Micro Crack Propagation under Mixed Mode
The Behavior of Fatigue Cracks in Pure Iron Subjected to Rotary Bending and Cyclic Torsion : 2nd Report, Effect of Crystal Grain Size
The Behavior of Fatigue Cracks in Pure Iron Subjected to Rotary Bending and Cyclic Torsion : 1st Report, Stress-Concentration Factor and Fatigue-Notch Factor due to Fatigue Cracks
On the Understressing Effect of the Eutectoid Steel at -60℃
Change of Material Properties at the Tips of Fatigue Cracks Subjected to Macroscopic Tensile and Shear Stresses for Propagation : in Rotary Bending and Cyclic Torsion
Photoelastic Investigation of the Maximum Stress in a Plate with a Reinforced Circular Hole under Tension
Examination of the Adaptability of the Copper Electroplating Method of Stress Analysis to the Low Temperature Range

もっと見る

スポンサーリンク