Measurement of Cyclic Stresses in High Temperature Range Using Nickel Electroplating : 2nd Report, Examination of Applicable Temperature and Accuracy of Measured Values

概要

論文の詳細を見る
A fundamental research for measurement of cyclic stresses in high temperature range is performed by applying a Watts-type nickel electroplating. The following results are presented. For the plating solution and plating conditions used, the range of applicable temperatures is from room temperature to 190℃. Though the desirable number of repetitions N is in the range of (0.5〜4)×10^6, it is more appropriate for the accuracy of measured values to set N= (2〜3)×10^6. Adding a small quantity of gelatin to the nickel plating solution, the applicable temperature range is extended toward higher temperature side. As a result of measurement of the stress-concentration factor in a circular shaft with a flat part under torsion, the measured values at each testing temperature are in good agreement with the theoretical result and it is verified that the present technique has sufficient accuracy.
一般社団法人日本機械学会の論文