Dependence of Processing Parameters on Structural Properties and Microstructures of Pulsed Laser Deposited LiMn2O4 Thin Films
スポンサーリンク
概要
- 論文の詳細を見る
LiMn2O4 thin films grown on a Pt/Ti/SiO2/Si(100) substrate by pulsed laser deposition were studied with focusing on the effects of growth parameters on crystallographic and structural characteristics. The growth parameters, namely oxygen pressure, target–substrate distance, laser energy density, pulse frequency and substrate temperature were established in a sequential manner to obtain smooth, dense and single-phase LiMn2O4 films. The smooth, dense LiMn2O4 single-phase thin films were found to show the improved cycle performance of cathode of thin film battery.
- Published by the Japan Society of Applied Physics through the Institute of Pure and Applied Physicsの論文
- 2009-07-25
著者
-
Yoon Seok-jin
Thin Film Material Research Center Korea Institute Of Science And Technology
-
Choi Ji-won
Thin Film Material Research Center Korea Institute Of Science And Technology
-
Gupta Ravindra
Department Of Materials Science And Engineering Yonsei University
-
Cho Yong
Department Of Chemical Engineering And Department Of Bionanotechnology Hanyang University
-
Yoon Seok-Jin
Thin Film Materials Research Center, Korea Institute of Science and Technology, Seoul 136-791, Republic of Korea
-
Cho Yong
Department of Materials Science and Engineering, Yonsei University, Seoul 120-749, Republic of Korea
-
Shin Dong
Thin Film Materials Research Center, Korea Institute of Science and Technology, Seoul 136-791, Republic of Korea
-
Choi Won-Kook
Materials Science and Technology Research Division, Korea Institute of Science and Technology, Seoul 136-791, Republic of Korea
-
Choi Ji-Won
Thin Film Materials Research Center, Korea Institute of Science and Technology, Seoul 136-791, Republic of Korea
関連論文
- The Mechanical Study on the Low Temperature Phases of LiCsSO_4 Crystal
- Consideration on Domain Walls Orientations in CsPbCl_3 Ferroelastic Crystal in the Monoclinic Phase : Condensed Matter: Structure, etc.
- Comparative study of induction of labor in nulliparous women with premature rupture of membranes at term compared to those with intact membranes : Duration of labor and mode of delivery
- Low Temperature Sintering of Ca[(Li_Nb_)_Ti_x]O_ Based Microwave Dielectric Ceramics with Glass Frit
- Far-Infrared Reflectivity Spectra and Influence of Thermally Induced Strain on Quality Factor of MgTiO_3 Ceramics at Microwave Frequencies
- Thickness Dependence of Pb(Zr_Ti_)O_3 Films Prepared by Pulsed Laser Deposition(Electrical Properties of Condensed Matter)
- Microwave Dielectric Characteristics of (1-x) (Al_ Ta_)O_2-xTiO_2 Ceramics(Electrical Properties of Condensed Matter)
- Microwave Dielectric Properties of(Pb, Ca)(Mg, Nb, Sn)O_3 Ceramics
- Overexpression of serine-threonine receptor kinase-associated protein in colorectal cancers
- Endophytic Bacillus sp. Isolated from the Interior of Balloon Flower Root(Microbiology & Fermentation Technology)
- SMARCB1/INI1 missense mutation in mucinous carcinoma with rhabdoid features
- Low-Temperature Sintering and Piezoelectric Properties of ZnO-Added 0.41Pb(Ni_ Nb_)O_3-0.36PbTiO_3-0.23PbZrO_3 Ceramics
- Temperature Dependences of Piezoelectric and Linear Electrooptic Properties of Rhombohedral 0.67Pb(Mg_Nb_)O_3-0.33PbTiO_3 Single Crystal Oriented in Direction
- Stochastic Analysis of Gas-Liquid-Solid Flow in Three-Phase Circulating Fluidized Beds
- Characterization of Pressure Signals in a Bubble Column by Wavelet Transform
- EFFECT OF SECONDARY AIR INJECTION ON BED-TO-WALL HEAT TRASFER IN A CIRCULATING FLUIDIZED BED
- EFFECT OF SECONDARY AIR INJECTION ON AXIAL SOLID HOLDUP DISTRIBUTION IN A CIRCULATING FLUIDIZED BED
- Influences of alkali oxides on crystallization and dielectric properties of anorthite-based low temperature dielectrics
- Determination of Urinary Metabolites of Alkyl Cellosolves by Solid Phase Extraction and GC/FID
- Clinical usefulness of 18F-FDG PET-CT for patients with gallbladder cancer and cholangiocarcinoma
- Analysis of stress distribution in flexible piezoelectric energy harvester
- Improved Crystalline Quality of GaN by Substrate Ion Beam Pretreatment
- Oncocytic papillary renal cell carcinoma with inverted nuclear pattern : Distinct subtype with an indolent clinical course
- Chemical durability of anorthite-based low temperature co-fired ceramics
- Ba欠損Ba_5Nb_4O_マイクロ波誘電体の温度特性の改善
- Post-Transplant Lymphoproliferative Disorder Localized in the Colon After Liver Transplantation : Report of a Case
- An Adaptive Beamforming Algorithm for MC-CDMA Systems with Antenna Array
- Incessant Monomorphic Ventricular Tachycardia Associated With Pneumococcal Meningitis : A Case Report
- Microstructure and Microwave Dielectric Properties of ($1-x$)Ba(Co1/3Nb2/3)O3–$x$Ba(Zn1/3Nb2/3)O3 Ceramics
- RADIAL SOLID MIXING CHARACTERISTICS IN SHALLOW GAS FLUIDIZED BEDS
- Dural Arteriovenous Fistula Associated With Meningioma: Spontaneous Disappearance After Tumor Removal : Case Report
- Mesenteric Involvement of Acute-Stage Buerger's Disease as the Initial Clinical Manifestation : Report of a Case
- A Many-Body Theory of Quantum-Limit Cyclotron Transition Line-Shapes in Electron-Phonon Systems Based on Projection Technique : Condensed Matter and Statistical Physics
- Effect of Chaotropic Salt on the Secondary Structure of Pigskin Gelatin
- DC Bias Effects on Piezoelectric Constants of Rhombohedral Pb(Zn1/3Nb2/3)O3–PbTiO3 Single Crystals
- A Glucose Sensor Fabricated by Piezoelectric Inkjet Printing of Conducting Polymers and Bienzymes
- INTERNAL GENERATION OF WAVES IN FULLY ELLIPTIC MODIFIED MILD-SLOPE EQUATION USING SOURCE FUNCTION METHOD UNDER FEM COMPUTATIONAL ENVIRONMENT
- Superior Mesenteric Artery Syndrome After Successful Coil Embolization of a Ruptured Pancreaticoduodenal Artery Aneurysm : Report of a Case
- Improved Figure of Merit of (Ba,Sr)TiO3-Based Ceramics by Sn Substitution
- Simple Oblique Lumbar Magnetic Resonance Imaging Technique and its Diagnostic Value for Extraforaminal Disc Herniation
- ON SENSIBLE FUZZY SUBALGEBRAS OF BCK-ALGEBRAS WITH RESPECT TO A s-NORM
- Piezoelectric and Dielectric Properties of 0.05Pb(Al.0.5Nb0.5)O3–0.95Pb(Zr0.52Ti0.48)O3 Ceramics Doped with Nb2O5 and MnO2
- Microwave Dielectric Characteristics of Ca[(Li1/3Nb2/3)1-xZrx]O3-δ Ceramics
- Effects of CuO and ZnO Additives on Sintering Temperature and Piezoelectric Properties of 0.41Pb(Ni1/3Nb2/3)O3–0.36PbTiO3–0.23PbZrO3 Ceramics
- Analysis of Tiny Piezoelectric Ultrasonic Linear Motor
- Effects of Annealing Process on Dielectric Properties of (Ba,Sr)TiO3 Thin Films Grown by RF Magnetron Sputtering
- Compound Linear Ultrasonic Motor Based on Shaking Beam
- Low Temperature Sintering of ZnO-Doped 0.01Pb(Mg1/2W1/2)O3–0.41Pb(Ni1/3Nb2/3)O3–0.35PbTiO3–0.23PbZrO3 Ceramics
- Dependence of Processing Parameters on Structural Properties and Microstructures of Pulsed Laser Deposited LiMn2O4 Thin Films
- Structural Variation and Microwave Dielectric Properties of ZrO2 Added Ba(Zn1/3Ta2/3)O3 Ceramics