Chemical durability of anorthite-based low temperature co-fired ceramics
スポンサーリンク
概要
- 論文の詳細を見る
The chemical durability of a typical low k LTCC material consisting of zinc calcium aluminoborosilicate glass and alumina filler was studied. Leaching experiments were performed by measuring weight loss of the samples in selected acid and base aqueous solutions of HCl, H2SO4 and KOH at two different temperatures of 25° and 80°C. The leaching performance was found to depend strongly on the type of leaching solution, duration and temperature. The LTCC sample was most stable in 10 vol% KOH with a minimal weight loss of ∼0.43% even after 300 min at 80°C. At the same condition, both cases of 10 vol% HCl and 10 vol% H2SO4 exhibited serious weight losses greater than 30%. It was interesting to observe that the high capability of leaching in the acid solutions originated significantly from the leaching of crystalline anorthite (CaAl2Si2O8) phase.
- 公益社団法人 日本セラミックス協会の論文
著者
-
Shin Dong
Department of Anatomy, Ajou University School of Medicine
-
Park Young
Department of Internal Medicine, Seoul National University College of Medicine, Cardiovascular Labor
-
CHO Yong
Department of Physics, Pusan National University
-
Shin Dong
Department Of Agricultural Chemistry The University Of Tokyo
-
Cho Yong
Department Of Chemical Engineering Korea Advanced Institute Of Science And Technology
-
LIM Won
Department of Materials Science and Engineering, Yonsei University
-
MOHANTY Bhaskar
Department of Materials Science and Engineering, Yonsei University
-
Park Young
Department Of Biology Kyung Hee University
-
Cho Yong
Department Of Chemical Engineering And Department Of Bionanotechnology Hanyang University
-
CHO Yong
Department of Materials Science and Engineering, Yonsei University
-
PARK Young
Department of Civil Engineering, Seoil University
-
SHIN Dong
Department of Materials Science and Engineering, Yonsei University
関連論文
- Outlining of the detailed structures in sectioned images from Visible Korean(International Forum on Medical Imaging in Asia 2009 (IFMIA 2009))
- Novel Index of Coronary Collateral Development as a Useful Predictor of Clinical Outcome in Type 2 Diabetic Patients With Coronary Artery Disease
- B15 UI Trend forecast of the Korean home appliances : An analysis of dynamic changing Korean home appliances UI with Road map and research about future trend foreast
- Proposal of histological criteria for intraepithelial atypical/proliferative biliary epithelial lesions of the bile duct in hepatolithiasis with respect to cholangiocarcinoma : Preliminary report based on interobserver agreement
- Inhibition of Cholesteryl Ester Transfer Protein by Rosenonolactone Derivatives
- The Mechanical Study on the Low Temperature Phases of LiCsSO_4 Crystal
- Consideration on Domain Walls Orientations in CsPbCl_3 Ferroelastic Crystal in the Monoclinic Phase : Condensed Matter: Structure, etc.
- Tilting of Liquid Crystal through Interaction with Methyl Orange Molecules Oriented by Circularly Polarized Light
- Inhibition of Ca2+-Release–Activated Ca2+ Channel (CRAC) and K+ Channels by Curcumin in Jurkat-T Cells
- Growth of Primary a Phase in the Semi-Solid State Mg-Zn-Ca-Zr Alloy
- Early Revascularization of Membranous Inlay Bone Graft in Canine Mandible Model
- In Situ Deposition of YBCO Thin Films by Sputtering under Low Oxygen Partial Pressure
- Glioblastomatous transformation of ganglioglioma : Case report with reference to molecular genetic and flow cytometric analysis
- マルチフェロイクス型TiNi繊維/Ni基コンポジットアクチュエータ材料設計と特性
- Xylanase from Alkalophilic Bacillus sp. YC-335
- B14 A Study on Developing Form for UI Roadmap : UI Roadmap for Eight Korean Home Electrical Appliances
- Pichia ohmeri fungemia associated with phlebitis: successful treatment with amphotericin B
- Effect of Heat Treatment on Microstructures and Tensile Properties of Ultrafine Grained C-Mn Steel Containing 0.34mass% V
- Microstructures and Mechanical Properties of Structural Materials Fabricated by Equal Channel Angular Pressing
- Spheroidization of Low Carbon Steel Processed by Equal Channel Angular Pressing
- Prediction of failed labor induction in parous women at term : Role of previous obstetric history, digital examination and sonographic measurement of cervical length
- Comparative study of induction of labor in nulliparous women with premature rupture of membranes at term compared to those with intact membranes : Duration of labor and mode of delivery
- Two cases of prurigo pigmentosa in atopic patients
- Early surgery of hamartoma of the floor of the fourth ventricle : A case report
- III B19 Spike detectability test of lateral convexity : conventional EEG and whole head magnetoencephalography
- Cervical Intramedullary Cavernous Angioma : A Report of 3 Surgical Case
- Overexpression of serine-threonine receptor kinase-associated protein in colorectal cancers
- Endophytic Bacillus sp. Isolated from the Interior of Balloon Flower Root(Microbiology & Fermentation Technology)
- Effect of Equal Channel Angular Pressing on the Distribution of Reinforcements in the Discontinuous Metal Matrix Composites
- Microstructures and Mechanical Properties of Equal Channel Angular Pressed 5083 Al Alloy
- Effect of Penetration Depth on Electrical Properties in Pd/Ge/Ti/Au Ohmic Contact to High-Low-Doped n-GaAs
- SMARCB1/INI1 missense mutation in mucinous carcinoma with rhabdoid features
- Direct Calculation of Limit Cycles of Draw Resonance and Their Stability in Spinning Process
- Identification of Proteins Indicating Radiation-induced Hepatic Toxicity in Cirrhotic Rats
- 子牛2頭の膝蓋骨外方脱臼に対する滑車溝形成術(外科学)
- Y chromosomal DNA variation in East Asian populations and its potential for inferring the peopling of Korea
- Y-Specific DNA polymorphisms of the YAP element and the locus DYS19 in the Korean population
- Effect of Undercooling of Austenite on Strain Induced Ferrite Transformation Behavior
- Inhibition of Abnormal Grain Growth during Isothermal Holding after Heavy Deformation in Nb Steel
- Microstructural Mechanisms during Dynamic Globularization of Ti-6Al-4V Alloy
- Effect of ECAP Strain on Deformation Behavior at Low Temperature Superplastic Regime of Ultrafine Grained 5083 Al Alloy Fabricated by ECAP
- A DIAGNOSTIC METHOD OF DETECTING OUTLIERS IN TESTING THE EQUALITY OF TWO COVARIANCE MATRICES
- Effect of Creep Deformation on Creep-Fatigue Damage in Lamellar TiAl Alloy
- Protective Effects of Aucubin Isolated from Eucommia ulmoides against UVB-Induced Oxidative Stress in Human Skin Fibroblasts(Pharmacognosy)
- Defect Reduction in Al_xGa_N Films Grown by Metal Organic Chemical Vapor Deposition
- Clinical Features and Prognostic Factors for Survival in Patients with Poorly Differentiated Thyroid Carcinoma and Comparison to the Patients with the Aggressive Variants of Papillary Thyroid Carcinoma
- Optical Properties of Cd_2GeSe_4 Single Crystal
- Epitaxial Growth of GaN on LaAlO_3(100) Substrate by RF Plasma Assisted Molecular Beam Epitaxy
- Merkel cell carcinoma of the inguinal lymph node with an unknown primary site
- Comparison of Two Electroretinography Systems Used in Dogs: The HMsERG and the RETIport
- Stochastic Analysis of Gas-Liquid-Solid Flow in Three-Phase Circulating Fluidized Beds
- Characterization of Pressure Signals in a Bubble Column by Wavelet Transform
- EFFECT OF SECONDARY AIR INJECTION ON BED-TO-WALL HEAT TRASFER IN A CIRCULATING FLUIDIZED BED
- EFFECT OF SECONDARY AIR INJECTION ON AXIAL SOLID HOLDUP DISTRIBUTION IN A CIRCULATING FLUIDIZED BED
- Stevens-Johnson syndrome following occupational exposure to carbamate insecticide
- Skin barrier function recovery after diamond microdermabrasion
- Characteristic of TiNi Shape Memory Alloy Fiber Reinforced 6061 Aluminum Matrix Composite by Using FEA and Experiment
- Application of Geometrical Form Factor in Differential Absorption Lidar Measurement
- Iterative Deconvolution Algorithm for Improving Range Resolution of a CO_2-Laser Based Lidar System
- Frequency Response Method to Determine the Stability of the Viscoelastic Spinning Processes
- Influences of alkali oxides on crystallization and dielectric properties of anorthite-based low temperature dielectrics
- Determination of Urinary Metabolites of Alkyl Cellosolves by Solid Phase Extraction and GC/FID
- K6PC-5, a sphingosine kinase activator, induces anti-aging effects in intrinsically aged skin through intracellular Ca^ signaling
- Radiation therapy for abdominal lymph node metastasis from hepatocellular carcinoma
- Acquired reactive perforating collagenosis triggered by insect bite
- Juvenile xanthogranuloma of the finger : An unusual localization
- Agminated lobular capillary hemangiomas presumably associated with an acquired arteriovenous malformation
- Microstructures and Mechanical Properties of Ultra Low Carbon IF Steel Processed by Accumulative Roll Bonding Process
- Clinical usefulness of 18F-FDG PET-CT for patients with gallbladder cancer and cholangiocarcinoma
- Influence of hydration status in normal subjects : fractional analysis of parameters of Tc-99m DTPA and Tc-99m MAG_3 renography
- COMPARATIVE STUDIES OF PATIENTS WITH TAKAYASU ARTERITIS IN JAPAN, KOREA AND INDIA : Comparison of Clinical Manifestations, Angiography and HLA-B Antigen
- Fabrication of Ultrafine Grained Aluminum by Differential Speed Accumulative Roll-Bonding (ARB) Process
- Improved Crystalline Quality of GaN by Substrate Ion Beam Pretreatment
- Leukemia cutis limited to the needle puncture sites
- Fabrication of Ultrafine Grained Ferrite/Martensite Dual Phase Steel by Severe Plastic Deformation
- Effect of Yttrium on High Temperature Strength of Magnesium
- Effect of Heat Treatment on Tensile Properties of Component with Macro-Interface between Unreinforced Magnesium and Composite
- Spectro-Ellipsometry Investigation of Cascaded Crystallization Behavior of Phase-Change Ge-Sb-Te Alloy
- Polymerization of Proteins Caused bt Reaction with Sugars and the Formation of 3-Deoxyglucosone under Physiological Conditions(Food & Nutrition)
- Effect of Annealing on the Impurities of 6H-SiC Single Crystals
- Multidetector Row Computed Tomography Noninvasively Assesses Coronary Reperfusion After Thrombolytic Therapy in Patients With ST Elevation Myocardial Infarction
- Formation of Nickel Silicide Layer on Strained-Si_Ge_/Si(001) using a Sacrificial Si Layer and its Morphological Instability
- An Immunohistochemical Localization of Transferrin Binding Protein in the Chicken Respiratory Tract
- Oncocytic papillary renal cell carcinoma with inverted nuclear pattern : Distinct subtype with an indolent clinical course
- Traumatic tattoo associated with jet injector (Dermojet) use
- Formation and Properties of Epitaxial CoSi_2 Layers on p-Si_Ge_/p-Si(001) using a Si Capping Layer by Metal-Organic Chemical Vapor Deposition
- Chemical durability of anorthite-based low temperature co-fired ceramics
- Ba欠損Ba_5Nb_4O_マイクロ波誘電体の温度特性の改善
- Post-Transplant Lymphoproliferative Disorder Localized in the Colon After Liver Transplantation : Report of a Case
- Energy Level Structure of Amorphous Silicon Carbide
- Synthesis and Optical Characterization of Polycyanurates with Pendent Second-Order Nonlinear Optical Chromophores
- Electron Energy-Loss Spectroscopy and Energy-Filtered Imaging of C_ Thin Films
- Influence of thyroid-stimulating hormone on ^F-fluorodeoxyglucose and ^Tc-methoxyisobutylisonitrile uptake in human poorly differentiated thyroid cancer cells in vitro
- Microsatellite instability and mutations of E2F-4 in hepatocellular carcinoma from Korea
- Artificial Disc Replacement Combined With Fusion Versus Two-Level Fusion in Cervical Two-Level Disc Disease
- Convenient One-Pot Synthesis of Sulfonyl Chlorides from Thiols Using Sulfuryl Chloride and Metal Nitrate
- Tegafur-induced hyperpigmentation of the tongue
- High Prevalence of Bronchiectasis in Adults : Analysis of CT Findings in a Health Screening Program
- What is the role of diagnostic laparoscopy in a gastroenterology unit?
- Effect of Pulse Frequency on Corrosion Behavior of AZ91 Mg Alloy Treated by Microarc Discharge Oxidation Coating